Overclock.net › Forums › AMD › AMD - General › Help !!!
New Posts  All Forums:Forum Nav:

Help !!!

post #1 of 6
Thread Starter 
I just put in a new PSU, when it tries to boot to windows I get a message that says NTLDR is missing. What the heck is wrong?
post #2 of 6
Thread Starter 
Do I have to reset thew boot priority matbe. I will try it and come back hoping somebody has a good answer.
post #3 of 6
Sounds like you need to hit F8 and choose the correct drive to boot from. If that doesn't work put the os disk in and do a repair on the drive. Thanks
post #4 of 6
Thread Starter 
OK I tried to set the SSD as the boot drive and it shows as disabled. I selected it from the ez menu to boot from and it booted fine. I will figure out a way to fix this now that I know what the issue is thank you for the insight.
post #5 of 6
Your boot order could be messed up, trying to boot from the wrong disk.

edit: saw you fixed it thumb.gif
post #6 of 6
Thread Starter 
Yes thanx,

I looked around the bios, which I am learning to use by the way, and reset the boot priority. When I rebooted after the psu swap the sata cable to the SSD was not all of the way in and the bios did not detect the SSD so obviously it could not set the SSD as the boot drive. Anyhow it's fixed, thanx again.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD - General
Overclock.net › Forums › AMD › AMD - General › Help !!!