So I have my hole cut, sanded, and the fresh coat of paint is currently drying. My acrylic is sitting off to the side ready to be mounted. Now I have two questions.
1.) Should I use heavy duty double sided tape or epoxy to mount the window?
2.) Can anyone please link from home depot / lowes / ace hardware etc U channel molding? I have scoured their sites and can't seem to find it. Hoping to avoid having to place an order just for 4 feet or so of molding. Suppose will also take advice on an easily available alternative trim?
Oh, and yes I do need trim, one of my lines is a little less than straight and I want to cover it up. Whoops, measured twice just followed the wrong line when cutting.
1.) Should I use heavy duty double sided tape or epoxy to mount the window?
2.) Can anyone please link from home depot / lowes / ace hardware etc U channel molding? I have scoured their sites and can't seem to find it. Hoping to avoid having to place an order just for 4 feet or so of molding. Suppose will also take advice on an easily available alternative trim?
Oh, and yes I do need trim, one of my lines is a little less than straight and I want to cover it up. Whoops, measured twice just followed the wrong line when cutting.
Exodus
(24 items) |
|
Exodus
(24 items) |
