Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › [Build Log] Project "Overkill" - Quad GeForce Titan's
New Posts  All Forums:Forum Nav:

[Build Log] Project "Overkill" - Quad GeForce Titan's - Page 21

post #201 of 782
Gotcha, so it'll just miss the plug... I suppose it's a good thing the power are vertical and not next to one another like most cards. thumb.gif
 
Play Server
(10 items)
 
NAS
(14 items)
 
CPUCPUMotherboardRAM
Intel Xeon L5640 Intel Xeon L5640 Dell R710 Mobo Hynix 144GB DDR3 ECC PC3L-10600R 
Hard DrivePowerCaseOther
Intel X25-M G2 80GB Redundant 840W PSU Dell 710 2.5" - Google Search Appliance Dell Perc H700 Raid Controller 
OtherOther
Dell iDRAC6 Enterprise Mellanox Connectx-2 10Gb SFP+ NIC 
CPUCPUMotherboardRAM
Intel Xeon E5-2670 v1 Intel Xeon E5-2670 v1 SuperMicro X9DRL-iF 64GB Kingston ECC (kvr16r11d4/16HA) 
Hard DriveHard DriveHard DriveCooling
12x 4TB HGST 5K4000 SanDisk SSD 960GB (cache) 6x 8TB WD Red Scythe AP-29 
CoolingOSPowerCase
2x Noctua U9DXi4 FreeNAS Corsair AX750 Norco RPC-4224 
OtherOther
3x LSI 9211-8i (HBA) Mellanox Connectx-2 10Gb NIC 
  hide details  
Reply
 
Play Server
(10 items)
 
NAS
(14 items)
 
CPUCPUMotherboardRAM
Intel Xeon L5640 Intel Xeon L5640 Dell R710 Mobo Hynix 144GB DDR3 ECC PC3L-10600R 
Hard DrivePowerCaseOther
Intel X25-M G2 80GB Redundant 840W PSU Dell 710 2.5" - Google Search Appliance Dell Perc H700 Raid Controller 
OtherOther
Dell iDRAC6 Enterprise Mellanox Connectx-2 10Gb SFP+ NIC 
CPUCPUMotherboardRAM
Intel Xeon E5-2670 v1 Intel Xeon E5-2670 v1 SuperMicro X9DRL-iF 64GB Kingston ECC (kvr16r11d4/16HA) 
Hard DriveHard DriveHard DriveCooling
12x 4TB HGST 5K4000 SanDisk SSD 960GB (cache) 6x 8TB WD Red Scythe AP-29 
CoolingOSPowerCase
2x Noctua U9DXi4 FreeNAS Corsair AX750 Norco RPC-4224 
OtherOther
3x LSI 9211-8i (HBA) Mellanox Connectx-2 10Gb NIC 
  hide details  
Reply
post #202 of 782
Thread Starter 
Quote:
Originally Posted by deafboy View Post

Gotcha, so it'll just miss the plug... I suppose it's a good thing the power are vertical and not next to one another like most cards. thumb.gif

Yeah very lucky smile.gif

I'm also investigating another idea which would use 90 degree adapters with extensions,

This idea would have the inlet/outlet ports coming from above the sata ports rather than out the top above the blocks. They would essentially be between the sata ports and the graphics cards power port.

I'll mock it up later today and show you, it might be easier to plumb smile.gif
post #203 of 782
Quote:
Originally Posted by soth View Post

Yeah very lucky smile.gif
I'm also investigating another idea which would use 90 degree adapters with extensions,
This idea would have the inlet/outlet ports coming from above the sata ports rather than out the top above the blocks. They would essentially be between the sata ports and the graphics cards power port.
I'll mock it up later today and show you, it might be easier to plumb smile.gif

You could definitely get that into a very nice clean loop, just have to play with it. You going to be using a Bridge for the GPUs or just sli links?
 
Play Server
(10 items)
 
NAS
(14 items)
 
CPUCPUMotherboardRAM
Intel Xeon L5640 Intel Xeon L5640 Dell R710 Mobo Hynix 144GB DDR3 ECC PC3L-10600R 
Hard DrivePowerCaseOther
Intel X25-M G2 80GB Redundant 840W PSU Dell 710 2.5" - Google Search Appliance Dell Perc H700 Raid Controller 
OtherOther
Dell iDRAC6 Enterprise Mellanox Connectx-2 10Gb SFP+ NIC 
CPUCPUMotherboardRAM
Intel Xeon E5-2670 v1 Intel Xeon E5-2670 v1 SuperMicro X9DRL-iF 64GB Kingston ECC (kvr16r11d4/16HA) 
Hard DriveHard DriveHard DriveCooling
12x 4TB HGST 5K4000 SanDisk SSD 960GB (cache) 6x 8TB WD Red Scythe AP-29 
CoolingOSPowerCase
2x Noctua U9DXi4 FreeNAS Corsair AX750 Norco RPC-4224 
OtherOther
3x LSI 9211-8i (HBA) Mellanox Connectx-2 10Gb NIC 
  hide details  
Reply
 
Play Server
(10 items)
 
NAS
(14 items)
 
CPUCPUMotherboardRAM
Intel Xeon L5640 Intel Xeon L5640 Dell R710 Mobo Hynix 144GB DDR3 ECC PC3L-10600R 
Hard DrivePowerCaseOther
Intel X25-M G2 80GB Redundant 840W PSU Dell 710 2.5" - Google Search Appliance Dell Perc H700 Raid Controller 
OtherOther
Dell iDRAC6 Enterprise Mellanox Connectx-2 10Gb SFP+ NIC 
CPUCPUMotherboardRAM
Intel Xeon E5-2670 v1 Intel Xeon E5-2670 v1 SuperMicro X9DRL-iF 64GB Kingston ECC (kvr16r11d4/16HA) 
Hard DriveHard DriveHard DriveCooling
12x 4TB HGST 5K4000 SanDisk SSD 960GB (cache) 6x 8TB WD Red Scythe AP-29 
CoolingOSPowerCase
2x Noctua U9DXi4 FreeNAS Corsair AX750 Norco RPC-4224 
OtherOther
3x LSI 9211-8i (HBA) Mellanox Connectx-2 10Gb NIC 
  hide details  
Reply
post #204 of 782
Thread Starter 
Quote:
Originally Posted by deafboy View Post

You could definitely get that into a very nice clean loop, just have to play with it. You going to be using a Bridge for the GPUs or just sli links?

I wanted to use SLI links from bitspower in series, but the new EK block's don't have double sided inlet/outlet holes so they won't work.

So I'm going to have to use the EK bridge (already purchased it, just need to install it).

The biggest hindrance for the motherboard ports is the size of the tubing, this build will be using 1/2″ 3/4″.

I have not been able to find a 1/2″ 3/4″ fitting that's small enough to not make contact with the gpu's,

So far I've tried Koolance, EK, XSPC, Enzotech,Bitspower and swiftech. None of them work.

If you've got any ideas besides using smaller tubing I'd love to hear them smile.gif
post #205 of 782
Yeah, that definitely makes things trickier. I'll have to think about that one. How much bitter, wider, are the fittings compared to the plugs?
 
Play Server
(10 items)
 
NAS
(14 items)
 
CPUCPUMotherboardRAM
Intel Xeon L5640 Intel Xeon L5640 Dell R710 Mobo Hynix 144GB DDR3 ECC PC3L-10600R 
Hard DrivePowerCaseOther
Intel X25-M G2 80GB Redundant 840W PSU Dell 710 2.5" - Google Search Appliance Dell Perc H700 Raid Controller 
OtherOther
Dell iDRAC6 Enterprise Mellanox Connectx-2 10Gb SFP+ NIC 
CPUCPUMotherboardRAM
Intel Xeon E5-2670 v1 Intel Xeon E5-2670 v1 SuperMicro X9DRL-iF 64GB Kingston ECC (kvr16r11d4/16HA) 
Hard DriveHard DriveHard DriveCooling
12x 4TB HGST 5K4000 SanDisk SSD 960GB (cache) 6x 8TB WD Red Scythe AP-29 
CoolingOSPowerCase
2x Noctua U9DXi4 FreeNAS Corsair AX750 Norco RPC-4224 
OtherOther
3x LSI 9211-8i (HBA) Mellanox Connectx-2 10Gb NIC 
  hide details  
Reply
 
Play Server
(10 items)
 
NAS
(14 items)
 
CPUCPUMotherboardRAM
Intel Xeon L5640 Intel Xeon L5640 Dell R710 Mobo Hynix 144GB DDR3 ECC PC3L-10600R 
Hard DrivePowerCaseOther
Intel X25-M G2 80GB Redundant 840W PSU Dell 710 2.5" - Google Search Appliance Dell Perc H700 Raid Controller 
OtherOther
Dell iDRAC6 Enterprise Mellanox Connectx-2 10Gb SFP+ NIC 
CPUCPUMotherboardRAM
Intel Xeon E5-2670 v1 Intel Xeon E5-2670 v1 SuperMicro X9DRL-iF 64GB Kingston ECC (kvr16r11d4/16HA) 
Hard DriveHard DriveHard DriveCooling
12x 4TB HGST 5K4000 SanDisk SSD 960GB (cache) 6x 8TB WD Red Scythe AP-29 
CoolingOSPowerCase
2x Noctua U9DXi4 FreeNAS Corsair AX750 Norco RPC-4224 
OtherOther
3x LSI 9211-8i (HBA) Mellanox Connectx-2 10Gb NIC 
  hide details  
Reply
post #206 of 782
Thread Starter 
Quote:
Originally Posted by deafboy View Post

Yeah, that definitely makes things trickier. I'll have to think about that one. How much bitter, wider, are the fittings compared to the plugs?

they are 3-4mm from the hole, I tried out a few other methods today but it looks like the method with the 2 x 50mm extenders will have to do.

The L shape i had in mind just added even more bends/restriction than the first method.

Also to make the 2nd card fit I had to remove its back plate which is unfortunate, but it will have to do until I get the custom block.

I'll take some pics in a bit, I'm just doing the water block on the 4th card now.
post #207 of 782
Yeah, that's definitely kind of a PITA.

If you weren't using that particular bridge I probably would have just suggested drilling and tapping holes so you could go from the bridge to the chipset block but I don't think you could really do that with the EK bridge. Guess I'll wait and see what it looks like before I go about throwing out more random suggestions. haha
 
Play Server
(10 items)
 
NAS
(14 items)
 
CPUCPUMotherboardRAM
Intel Xeon L5640 Intel Xeon L5640 Dell R710 Mobo Hynix 144GB DDR3 ECC PC3L-10600R 
Hard DrivePowerCaseOther
Intel X25-M G2 80GB Redundant 840W PSU Dell 710 2.5" - Google Search Appliance Dell Perc H700 Raid Controller 
OtherOther
Dell iDRAC6 Enterprise Mellanox Connectx-2 10Gb SFP+ NIC 
CPUCPUMotherboardRAM
Intel Xeon E5-2670 v1 Intel Xeon E5-2670 v1 SuperMicro X9DRL-iF 64GB Kingston ECC (kvr16r11d4/16HA) 
Hard DriveHard DriveHard DriveCooling
12x 4TB HGST 5K4000 SanDisk SSD 960GB (cache) 6x 8TB WD Red Scythe AP-29 
CoolingOSPowerCase
2x Noctua U9DXi4 FreeNAS Corsair AX750 Norco RPC-4224 
OtherOther
3x LSI 9211-8i (HBA) Mellanox Connectx-2 10Gb NIC 
  hide details  
Reply
 
Play Server
(10 items)
 
NAS
(14 items)
 
CPUCPUMotherboardRAM
Intel Xeon L5640 Intel Xeon L5640 Dell R710 Mobo Hynix 144GB DDR3 ECC PC3L-10600R 
Hard DrivePowerCaseOther
Intel X25-M G2 80GB Redundant 840W PSU Dell 710 2.5" - Google Search Appliance Dell Perc H700 Raid Controller 
OtherOther
Dell iDRAC6 Enterprise Mellanox Connectx-2 10Gb SFP+ NIC 
CPUCPUMotherboardRAM
Intel Xeon E5-2670 v1 Intel Xeon E5-2670 v1 SuperMicro X9DRL-iF 64GB Kingston ECC (kvr16r11d4/16HA) 
Hard DriveHard DriveHard DriveCooling
12x 4TB HGST 5K4000 SanDisk SSD 960GB (cache) 6x 8TB WD Red Scythe AP-29 
CoolingOSPowerCase
2x Noctua U9DXi4 FreeNAS Corsair AX750 Norco RPC-4224 
OtherOther
3x LSI 9211-8i (HBA) Mellanox Connectx-2 10Gb NIC 
  hide details  
Reply
post #208 of 782
Thread Starter 
Quote:
Originally Posted by deafboy View Post

Yeah, that's definitely kind of a PITA.
If you weren't using that particular bridge I probably would have just suggested drilling and tapping holes so you could go from the bridge to the chipset block but I don't think you could really do that with the EK bridge. Guess I'll wait and see what it looks like before I go about throwing out more random suggestions. haha

Yeah I considered something similar to this,

I want the GPU's on an independent loop smile.gif


I've setup my radiators for flushing overnight, things are really going to start coming together very quickly now...

I've got Assassins Creed 3, Xcom, Prototype 2, Borderlands 2, Torchlight 2, Hitman, Sleeping Dogs, Black Ops 2, Ghost Recon, Spec Ops, Dishonored and finally darksiders 2 all sitting there waiting on this system, cant wait.





My Steam if you want to check my game list,

I played a bit of black ops earlier this week, but my current PC is only just hanging together (needs a flush badly and gpu temps are 4-5 degree's above normal), and because I use it everyday for work I cant have it die or take it to pieces to flush frown.gif
Edited by soth - 11/21/12 at 11:38pm
post #209 of 782
If you're flushing it, wouldn't you want there to be some sort of filter? haha. Systems going to be beastly when done. thumb.gif
 
Play Server
(10 items)
 
NAS
(14 items)
 
CPUCPUMotherboardRAM
Intel Xeon L5640 Intel Xeon L5640 Dell R710 Mobo Hynix 144GB DDR3 ECC PC3L-10600R 
Hard DrivePowerCaseOther
Intel X25-M G2 80GB Redundant 840W PSU Dell 710 2.5" - Google Search Appliance Dell Perc H700 Raid Controller 
OtherOther
Dell iDRAC6 Enterprise Mellanox Connectx-2 10Gb SFP+ NIC 
CPUCPUMotherboardRAM
Intel Xeon E5-2670 v1 Intel Xeon E5-2670 v1 SuperMicro X9DRL-iF 64GB Kingston ECC (kvr16r11d4/16HA) 
Hard DriveHard DriveHard DriveCooling
12x 4TB HGST 5K4000 SanDisk SSD 960GB (cache) 6x 8TB WD Red Scythe AP-29 
CoolingOSPowerCase
2x Noctua U9DXi4 FreeNAS Corsair AX750 Norco RPC-4224 
OtherOther
3x LSI 9211-8i (HBA) Mellanox Connectx-2 10Gb NIC 
  hide details  
Reply
 
Play Server
(10 items)
 
NAS
(14 items)
 
CPUCPUMotherboardRAM
Intel Xeon L5640 Intel Xeon L5640 Dell R710 Mobo Hynix 144GB DDR3 ECC PC3L-10600R 
Hard DrivePowerCaseOther
Intel X25-M G2 80GB Redundant 840W PSU Dell 710 2.5" - Google Search Appliance Dell Perc H700 Raid Controller 
OtherOther
Dell iDRAC6 Enterprise Mellanox Connectx-2 10Gb SFP+ NIC 
CPUCPUMotherboardRAM
Intel Xeon E5-2670 v1 Intel Xeon E5-2670 v1 SuperMicro X9DRL-iF 64GB Kingston ECC (kvr16r11d4/16HA) 
Hard DriveHard DriveHard DriveCooling
12x 4TB HGST 5K4000 SanDisk SSD 960GB (cache) 6x 8TB WD Red Scythe AP-29 
CoolingOSPowerCase
2x Noctua U9DXi4 FreeNAS Corsair AX750 Norco RPC-4224 
OtherOther
3x LSI 9211-8i (HBA) Mellanox Connectx-2 10Gb NIC 
  hide details  
Reply
post #210 of 782
Thread Starter 
Quote:
Originally Posted by deafboy View Post

If you're flushing it, wouldn't you want there to be some sort of filter? haha. Systems going to be beastly when done. thumb.gif

there's 2 filters in the 3rd image, they are the silver circular disks, they filter up to 0.27mm/sq particles smile.gif (one for inlet and one for outlet to protect the pumps and res.

They are better than a pool filter and gather much smaller stuff smile.gif

Link to filter
Edited by soth - 11/22/12 at 12:10am
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Build Logs
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › [Build Log] Project "Overkill" - Quad GeForce Titan's