Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 1063

post #10621 of 33804
Quote:
Originally Posted by justanoldman View Post

I know there is no definite answer, but since delidding gives us much more room to increase voltage, what do you guys think is the highest vCore that is safe for a 24/7 set it and forget it? Assuming you use offset, and want the chip not to degrade noticeably within three years.

The 1.3-1.45V vcore range is considered safe on air/water to run 24/7 smile.gif

the "max" vcore is upto 1.52V, but thats, again, considered the max you should run ivy on air/water, i wouldnt advice it tho,
have to wait and see first how ivy runs on that high vcore in, lets say , 1 year from now,
then we can look back and compare, or hear the story's about degradation,
till now we havent seen any degration..
Edited by VonDutch - 2/1/13 at 7:15am
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
post #10622 of 33804
Thanks for all the answers. I guess it will all depend on my temps after delidding on how high I can go.

I think my ultra may get here today, pretty fast for an order placed two days ago. Suddenly I am getting nervous.
Ivy 5.0
(14 items)
 
Ivy 4.8
(15 items)
 
 
CPUMotherboardGraphicsRAM
i7-3770k 5.0 24/7 Maximus V Formula EVGA GTX 690 G.Skill Trident X 2400 (2x8gb) 
Hard DriveOptical DriveCoolingOS
Samsung 840 Pro 512GB Pioneer BD-RW Swiftech H220 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
2 x NEC 30" Logitech G15 Corsair AX1200 NZXT Switch 810 
MouseAudio
Logitech G9x Logitech G51 
  hide details  
Reply
Ivy 5.0
(14 items)
 
Ivy 4.8
(15 items)
 
 
CPUMotherboardGraphicsRAM
i7-3770k 5.0 24/7 Maximus V Formula EVGA GTX 690 G.Skill Trident X 2400 (2x8gb) 
Hard DriveOptical DriveCoolingOS
Samsung 840 Pro 512GB Pioneer BD-RW Swiftech H220 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
2 x NEC 30" Logitech G15 Corsair AX1200 NZXT Switch 810 
MouseAudio
Logitech G9x Logitech G51 
  hide details  
Reply
post #10623 of 33804
Quote:
Originally Posted by justanoldman View Post

Thanks for all the answers. I guess it will all depend on my temps after delidding on how high I can go.

I think my ultra may get here today, pretty fast for an order placed two days ago. Suddenly I am getting nervous.

you have a H100i ?
your temps wont limit you if all goes well wink.gif
i can run 5.0ghz IBT(1.510V vcore) , and hit 83C on the hottest core with my simple aircooler..lol
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
post #10624 of 33804
Quote:
Originally Posted by VonDutch View Post

you have a H100i ?
your temps wont limit you if all goes well wink.gif
i can run 5.0ghz IBT(1.510V vcore) , and hit 83C on the hottest core with my simple aircooler..lol
If that is the case, I may be the test subject for 24/7 high vCore.
If I am risking my chip and any form of warrantee whatsoever by delidding, how much more risk is there for 1.5v 24/7?
Ivy 5.0
(14 items)
 
Ivy 4.8
(15 items)
 
 
CPUMotherboardGraphicsRAM
i7-3770k 5.0 24/7 Maximus V Formula EVGA GTX 690 G.Skill Trident X 2400 (2x8gb) 
Hard DriveOptical DriveCoolingOS
Samsung 840 Pro 512GB Pioneer BD-RW Swiftech H220 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
2 x NEC 30" Logitech G15 Corsair AX1200 NZXT Switch 810 
MouseAudio
Logitech G9x Logitech G51 
  hide details  
Reply
Ivy 5.0
(14 items)
 
Ivy 4.8
(15 items)
 
 
CPUMotherboardGraphicsRAM
i7-3770k 5.0 24/7 Maximus V Formula EVGA GTX 690 G.Skill Trident X 2400 (2x8gb) 
Hard DriveOptical DriveCoolingOS
Samsung 840 Pro 512GB Pioneer BD-RW Swiftech H220 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
2 x NEC 30" Logitech G15 Corsair AX1200 NZXT Switch 810 
MouseAudio
Logitech G9x Logitech G51 
  hide details  
Reply
post #10625 of 33804
Quote:
Originally Posted by justanoldman View Post

If that is the case, I may be the test subject for 24/7 high vCore.
If I am risking my chip and any form of warrantee whatsoever by delidding, how much more risk is there for 1.5v 24/7?

no degradation within 3 years..not noticeable, but low temps are important,
but then, thats why you delid it for smile.gif

And running all those stability test programs
to get a stable oc, the temps you see there,
you prolly never see again in the coming 3 years, with normal daily usage,
if you want to do some benching, upto 1.6V vcore can do if temps are low,
above 1.6V vcore on air/water is entering the dangerzone,
thats what i do only if my temps are like this,

thats still on air, but very cold, i think cold enough to do some short benches, upto 1.7-1.8V vcore ..lol biggrin.gif

hope this helps wink.gif
Edited by VonDutch - 2/1/13 at 8:52am
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
post #10626 of 33804
Wow - those new razor blades came in that I ordered....they are SUPER thin.
In fact they aren't that STRONG either - if I put enough force, I bet I could bend them. That isn't a problem for de-lidding though is it?
This blade is so much thinner than the one I used for the pent 4 - that it reassures me that nothing will actually damage the chip.

I'm waiting fro my anti-static wrist band + replacement CLU to come in, and then we can skype/video call for my de-lidding - live stream esk - something I'll upload on youtube too biggrin.gif

Old blade used for pent 4:


New blade bought for I7:
post #10627 of 33804
In a few of the guides/videos, there is no mention of 90%+ alcohol. It is a good or bad idea to use it to help remove both the tim on the die and the black glue from the pcb and ihs?
Ivy 5.0
(14 items)
 
Ivy 4.8
(15 items)
 
 
CPUMotherboardGraphicsRAM
i7-3770k 5.0 24/7 Maximus V Formula EVGA GTX 690 G.Skill Trident X 2400 (2x8gb) 
Hard DriveOptical DriveCoolingOS
Samsung 840 Pro 512GB Pioneer BD-RW Swiftech H220 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
2 x NEC 30" Logitech G15 Corsair AX1200 NZXT Switch 810 
MouseAudio
Logitech G9x Logitech G51 
  hide details  
Reply
Ivy 5.0
(14 items)
 
Ivy 4.8
(15 items)
 
 
CPUMotherboardGraphicsRAM
i7-3770k 5.0 24/7 Maximus V Formula EVGA GTX 690 G.Skill Trident X 2400 (2x8gb) 
Hard DriveOptical DriveCoolingOS
Samsung 840 Pro 512GB Pioneer BD-RW Swiftech H220 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
2 x NEC 30" Logitech G15 Corsair AX1200 NZXT Switch 810 
MouseAudio
Logitech G9x Logitech G51 
  hide details  
Reply
post #10628 of 33804
Quote:
Originally Posted by justanoldman View Post

In a few of the guides/videos, there is no mention of 90%+ alcohol. It is a good or bad idea to use it to help remove both the tim on the die and the black glue from the pcb and ihs?

for cleaning the tim, the high % alcohol works best, for cleaning the die also,
i use spiritus, more then 90%

the high amount of alcohol evaporates fast, so thats a good thing too smile.gif

the black glue you have to first clean with your fingernails and/or a creditcard , but always be careful,
if you have most of the ashesive of that way, you can use a q-tip with the alcohol on it, and dab
the left over glue with it a few times, let it soak a while, should be easy to clean then..
a dremel with a softtip seems to work good too..
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
post #10629 of 33804
Quote:
Originally Posted by justanoldman View Post

In a few of the guides/videos, there is no mention of 90%+ alcohol. It is a good or bad idea to use it to help remove both the tim on the die and the black glue from the pcb and ihs?

I used metholated spirits on the die and used my finger nails on the glue, I also tried a credit card and used a model knife-type thing for the glue on the IHS.
 
Seven Seven Five
(12 items)
 
NASSY
(5 items)
 
CPUMotherboardGraphicsRAM
Convertible i5 3570k (De-Lidded) Gigabyte Z77x-D3H XFX R9 290 With Koolance Block (1179/1450) 16GB G-Skill Ares 1866 
Hard DriveHard DriveOptical DriveCooling
Samsung 840 Evo Seagate Barracuda 2TB 1x OEM DVD Drives Heatkiller Rev 3.0 
CoolingCoolingCoolingCooling
XSPC RX360 Laing D5 + XSPC Res Primochill Bloodshed Red Tubing Koolance Fullcover R9 290x Block 
CoolingOSMonitorMonitor
XSPC EX360 Windows 10 Pro x64 Asus VEH228H Asus VE228H 
MonitorKeyboardPowerCase
Aavara TS742 Dual Monitor Stand Ducky Shine II Cherry Blue RED Backlit Mechanic... Silverstone Strider 850W Thermaltake Core x71 Tempered Glass Riing Edition 
MouseMouse PadAudioOther
Zowie FK1 House of Stealth Microlab Solo6c Logitech C100 Webcam 
CPUGraphicsRAMHard Drive
Celeron N3160 HD Graphics 400 4GB DDR3 4TB WD Red 
Cooling
Some 120mm fan 
  hide details  
Reply
 
Seven Seven Five
(12 items)
 
NASSY
(5 items)
 
CPUMotherboardGraphicsRAM
Convertible i5 3570k (De-Lidded) Gigabyte Z77x-D3H XFX R9 290 With Koolance Block (1179/1450) 16GB G-Skill Ares 1866 
Hard DriveHard DriveOptical DriveCooling
Samsung 840 Evo Seagate Barracuda 2TB 1x OEM DVD Drives Heatkiller Rev 3.0 
CoolingCoolingCoolingCooling
XSPC RX360 Laing D5 + XSPC Res Primochill Bloodshed Red Tubing Koolance Fullcover R9 290x Block 
CoolingOSMonitorMonitor
XSPC EX360 Windows 10 Pro x64 Asus VEH228H Asus VE228H 
MonitorKeyboardPowerCase
Aavara TS742 Dual Monitor Stand Ducky Shine II Cherry Blue RED Backlit Mechanic... Silverstone Strider 850W Thermaltake Core x71 Tempered Glass Riing Edition 
MouseMouse PadAudioOther
Zowie FK1 House of Stealth Microlab Solo6c Logitech C100 Webcam 
CPUGraphicsRAMHard Drive
Celeron N3160 HD Graphics 400 4GB DDR3 4TB WD Red 
Cooling
Some 120mm fan 
  hide details  
Reply
post #10630 of 33804
Quote:
Originally Posted by Matt-Matt View Post

I used metholated spirits on the die and used my finger nails on the glue, I also tried a credit card and used a model knife-type thing for the glue on the IHS.

i used the backside of the box cutter...lol

wouldnt recommend that tho biggrin.gif
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide