Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 1088

post #10871 of 33643
Going to check pins now and recheck CPU.

Here is IBT after de-lidding - please bear in mind that I have MX2 on the die AND on the IHS -> also this is super cold vs before which was folding - so temps are a little better.




New temps: 73-83

Old temps: 81-91
http://www.overclock.net/t/1313179/official-delidded-ivy-bridge-club/10800#post_19205323
Edited by Totally Dubbed - 2/3/13 at 1:34pm
post #10872 of 33643
I had a few scuff marks, they were easily wiped off. Nothing serious.

I made a custom window for my NZXT Source 210, and removed the HDD bays. I had to remove the heatspreader ridgebacks on my mushkin enhanced ridebacks - while the nh-d14 can lift up the fan to accomodate them, the nzxt source 210 case wont fit the nh-d14 if you lift up the fan, especially if you got a custom window slightly reducing the width of the case. NZXT sleeved led blue 1m. No HDD, only a single SSD behind the motherboard panel.

The pictures don't do it justice, it's a much deeper blue irl and I had to make the pics grainy in order to capture detail in the dark.













I don't have as many pics of my delid process because I mostly took video (will edit, it's like 40minutes).







I don't have great records of temps before/after - I focused on binning the 2 chips I had, not temp testing. I kinda wish I did an 8k min/max fft custom p95 test for temps but it didn't cross my mind. Unfortunate, as there appears to be a 20*C temp difference from the first test of p95 and the 2nd fft length of 8. I really think my temp drop is about 15*C though, I have a lot of tests showing hitting about 92*C and when I tested last night I hit 78*C on the first 5 min of p95 (but hit up to 85+ during the 2nd fft length, I dont think i ever got that far before because it'd be hitting 100*C and instantly failing lol). PK3/PK3

I've been running p95 for about 13 hours now at 4.6@1.4v. Max temp is 78*c.
Build In Progress
(17 items)
 
   
CPUMotherboardGraphicsRAM
Haswell i7-4770K 4.8GHz@1.452v/1.97vRIN Gigabyte Z87X-UD3H Older Gigabyte 7950 (H60 Mod) 2x4GB Gskill 2400CL11 Hynix CFRs 
Hard DriveCoolingOSMonitor
Samsung 830 128gb Corsair H110 w/4x 140mm Yate Loon High Blues W7 x64 Ultimate Yarrgh Matey Dell U2312HM Matte IPS 1080p 
MonitorMonitorKeyboardPower
Sanyo DP19640 18.5" 768p KDS Rad-7xp 1024p CM Storm Quickfire Rapids Brown Rosewill Capstone 750 
CaseMouseMouse PadAudio
Bitfenix Shinobi Modded CM Storm Spawn Steelseries Diablo 3 2 set CD Speaker + Big Sub 
Other
Bitfenix Recon Fan Controller Moded 
CPUMotherboardGraphicsRAM
Delidded i7-3770K 5GHz@1.499 Gigabyte Z77X-UD5H 1.1 Sapphire Dual-X 7950 3L Boost 4x2GB Mushkin Ridgeback 2200mhz 8/11/8/27 1.75v... 
Hard DriveCoolingCoolingCooling
Intel X25-M 80GB SSD NH-D14 SE2011 Noctua 120/140/140 Fans 3 x Yate Loon Mediums (Petras) 2 x NZXT Havik 140mm Fans 
OSMonitorMonitorKeyboard
Hax'd W7 Ultimate 64-bit Sanyo DP19640 19'' KDS Radius Rad-7xp 17'' Ducky 1087 MX Brown 10keyless 
PowerCaseMouseMouse Pad
Rosewill Capstone 550w Modular NZXT Source 210 w/Modded Window Razer Deathadder 3.5G Steelseries Blizzcon D3 
AudioAudioOtherOther
Phillips FW-C250 2 Speaker Set w/3 CD Changer JBL Sub 6 Subwoofer NZXT Sleeved LED Strip 1m Blue NZXT Sentry 2 Fan Controller 
Other
Colonial Blue Paracord Sleeving 
CPUMotherboardGraphicsRAM
Phenom ii X4 955C2, $31, 5 broken pins, works! ... Biostar A770e3 6.3 Red&Black MSI GTX 460 768mb Twin Frozr II 2 x 2GB Kingston HyperX 1333 OC to 1348CL7@1.65v 
Hard DriveCoolingCoolingCooling
Intel X25-M G2 80GB SSD NH-D14 SE2011 6 x Case Fans (4 x YL-M, NZXT case fan, CM Hype... Jerryrigged Chipset-Northbridge 80mm HSF 
CoolingOSMonitorKeyboard
Jerryrigged VRM Heatsink (sawed off stock AM2 h... Hax'd W7 Ultimate 64bit Sanyo DP19640 19"1360x768 Ducky Cherry Browns 10keyless 
PowerCaseMouseMouse Pad
Antec Earthwatts 430D NZXT Gamma Steelseries Kinzu Optical Steelseries Blizzcon Diablo 3 
  hide details  
Reply
Build In Progress
(17 items)
 
   
CPUMotherboardGraphicsRAM
Haswell i7-4770K 4.8GHz@1.452v/1.97vRIN Gigabyte Z87X-UD3H Older Gigabyte 7950 (H60 Mod) 2x4GB Gskill 2400CL11 Hynix CFRs 
Hard DriveCoolingOSMonitor
Samsung 830 128gb Corsair H110 w/4x 140mm Yate Loon High Blues W7 x64 Ultimate Yarrgh Matey Dell U2312HM Matte IPS 1080p 
MonitorMonitorKeyboardPower
Sanyo DP19640 18.5" 768p KDS Rad-7xp 1024p CM Storm Quickfire Rapids Brown Rosewill Capstone 750 
CaseMouseMouse PadAudio
Bitfenix Shinobi Modded CM Storm Spawn Steelseries Diablo 3 2 set CD Speaker + Big Sub 
Other
Bitfenix Recon Fan Controller Moded 
CPUMotherboardGraphicsRAM
Delidded i7-3770K 5GHz@1.499 Gigabyte Z77X-UD5H 1.1 Sapphire Dual-X 7950 3L Boost 4x2GB Mushkin Ridgeback 2200mhz 8/11/8/27 1.75v... 
Hard DriveCoolingCoolingCooling
Intel X25-M 80GB SSD NH-D14 SE2011 Noctua 120/140/140 Fans 3 x Yate Loon Mediums (Petras) 2 x NZXT Havik 140mm Fans 
OSMonitorMonitorKeyboard
Hax'd W7 Ultimate 64-bit Sanyo DP19640 19'' KDS Radius Rad-7xp 17'' Ducky 1087 MX Brown 10keyless 
PowerCaseMouseMouse Pad
Rosewill Capstone 550w Modular NZXT Source 210 w/Modded Window Razer Deathadder 3.5G Steelseries Blizzcon D3 
AudioAudioOtherOther
Phillips FW-C250 2 Speaker Set w/3 CD Changer JBL Sub 6 Subwoofer NZXT Sleeved LED Strip 1m Blue NZXT Sentry 2 Fan Controller 
Other
Colonial Blue Paracord Sleeving 
CPUMotherboardGraphicsRAM
Phenom ii X4 955C2, $31, 5 broken pins, works! ... Biostar A770e3 6.3 Red&Black MSI GTX 460 768mb Twin Frozr II 2 x 2GB Kingston HyperX 1333 OC to 1348CL7@1.65v 
Hard DriveCoolingCoolingCooling
Intel X25-M G2 80GB SSD NH-D14 SE2011 6 x Case Fans (4 x YL-M, NZXT case fan, CM Hype... Jerryrigged Chipset-Northbridge 80mm HSF 
CoolingOSMonitorKeyboard
Jerryrigged VRM Heatsink (sawed off stock AM2 h... Hax'd W7 Ultimate 64bit Sanyo DP19640 19"1360x768 Ducky Cherry Browns 10keyless 
PowerCaseMouseMouse Pad
Antec Earthwatts 430D NZXT Gamma Steelseries Kinzu Optical Steelseries Blizzcon Diablo 3 
  hide details  
Reply
post #10873 of 33643
@TD - Good work, let us know what those pins look like, hopefully one got pushed out of alignment

@Belial - nice modding, looks good and clean.
post #10874 of 33643
Thread Starter 
Quote:
Originally Posted by stickg1 View Post

@TD - Good work, let us know what those pins look like, hopefully one got pushed out of alignment

@Belial - nice modding, looks good and clean.

we now have it in triple channel lol dimm 2 still wont work. 1 3 and 4 are all good though.
post #10875 of 33643
Paper worked without the antec on past POST - but then put the antec on, and it doesn't work again. Only 1 DIMM works...I think it needs to be "rmaed" - here are pics for the pins and everything:





















post #10876 of 33643
Quote:
Originally Posted by justanoldman View Post

Thanks for all the info.
I would guess around 62c also, but right now I am using AC5 between the ihs and cooler. I will use Ultra there when I get some more, that could be a couple more degrees I hope. I don't understand why lapping a really concave IHS did not help, but that might be part of the problem I am having. I can't find anyone, anywhere that has lapped an H100i, so I don't know if that is what I need to do to get it to fit better with the IHS.
Lots of heat spreaders are concave, they are made that way for a reason. IMO you will likely gain nothing sanding it flat. It is possible it's not seating squarely for some reason, though.
Looks like you already had a somewhat decent cpu, neither one of my 3770K would do 4.6 stable on 1.29v before lapping. By all means continue to experiment, but it may be you will not get better temps.
post #10877 of 33643
Quote:
Originally Posted by Valgaur View Post

we now have it in triple channel lol dimm 2 still wont work. 1 3 and 4 are all good though.

Good work! So he can use 1 and 3 and operate in dual channel? Since he had a Kuhler 920 theres no height or slot restraints so I would almost consider that as 100% operational. Although he can't use all 4 RAM slots, if he still has dual channel he can have up to 16GB and that's good enough!
post #10878 of 33643
damn TD, this might be the one time I'm sad to say that there are no bent pins. Must be that scuff on the PCB..
post #10879 of 33643
Thread Starter 
Quote:
Originally Posted by stickg1 View Post

Good work! So he can use 1 and 3 and operate in dual channel? Since he had a Kuhler 920 theres no height or slot restraints so I would almost consider that as 100% operational. Although he can't use all 4 RAM slots, if he still has dual channel he can have up to 16GB and that's good enough!

right now we cant get more than one working with the antec 920 on right now... look at the pins up top.
post #10880 of 33643
Double check these pins, some of them look to be down too low and not making contact

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide