Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 12

post #111 of 33565
Quote:
Originally Posted by Swag View Post

Won't eat a hole, but since it's electrically conductive (very much), if you hit the gold parts of the PCB, it may cause some issues. Electric current + electric conductivity isn't too well digested in the PC world.

When I do my application of Liquid Pro it will be on the die only. I've read that some put it on the top of the IHS and the Die. Since I'm doing direct die mount with my water block I think it will be safer to only put a thin coat only on the die. Will be less Liquid Pro that could possibly flake off and short something out.
Edited by SonDa5 - 10/7/12 at 1:21am
B.K.T.
(24 items)
 
  
CPUMotherboardGraphicsGraphics
De-Lidded direct die mount Intel i7-4790k No IHS ASUS Z97 WS Sapphire HD7950 OC 950mhz Edition Sapphire HD7950 Vapor X 
RAMHard DriveHard DriveHard Drive
GSkill 2400mhz CL9  Samsung 840 caviar black Hitachi 
Hard DriveOptical DriveCoolingCooling
OCZ AGILITY 4 LG 16x BD burner DT Sniper CPU block Watercool HEATKILLER® GPU-X³ 79X0 Ni-Bl  
CoolingCoolingCoolingOS
Swiftech pump 655 Alphacool NexXxos UT 60 420mm 3x140mm Bgears 1800 RPM fans in pull on radiator Windows 7 Pro 64bit 
MonitorKeyboardPowerCase
BenQ XL2410T SS 6gv2 Seasonic Platinum 860 Silverstone Raven RV02-BW 
MouseMouseMouse PadAudio
Steel Series sensei Steel Series sensei SS Experience I-2, SS 9HD Audio Technica ATH-AD900 
  hide details  
Reply
B.K.T.
(24 items)
 
  
CPUMotherboardGraphicsGraphics
De-Lidded direct die mount Intel i7-4790k No IHS ASUS Z97 WS Sapphire HD7950 OC 950mhz Edition Sapphire HD7950 Vapor X 
RAMHard DriveHard DriveHard Drive
GSkill 2400mhz CL9  Samsung 840 caviar black Hitachi 
Hard DriveOptical DriveCoolingCooling
OCZ AGILITY 4 LG 16x BD burner DT Sniper CPU block Watercool HEATKILLER® GPU-X³ 79X0 Ni-Bl  
CoolingCoolingCoolingOS
Swiftech pump 655 Alphacool NexXxos UT 60 420mm 3x140mm Bgears 1800 RPM fans in pull on radiator Windows 7 Pro 64bit 
MonitorKeyboardPowerCase
BenQ XL2410T SS 6gv2 Seasonic Platinum 860 Silverstone Raven RV02-BW 
MouseMouseMouse PadAudio
Steel Series sensei Steel Series sensei SS Experience I-2, SS 9HD Audio Technica ATH-AD900 
  hide details  
Reply
post #112 of 33565
Quote:
Originally Posted by SonDa5 View Post

Quote:
Originally Posted by Swag View Post

Won't eat a hole, but since it's electrically conductive (very much), if you hit the gold parts of the PCB, it may cause some issues. Electric current + electric conductivity isn't too well digested in the PC world.

When I do my application I'm going to only put a coat of it on the bare die.

It should be the tiniest layer ever. The thinner the better. As long as it covers the entire die's top, thinnest as possible is what's desirable.
Swag's Venus
(18 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k @ 4.8GHz Asus Maximus V Gene EVGA GTX 680 G.Skill RipJaws X 16GB (2x8GB) 
Hard DriveHard DriveCoolingOS
Samsung 830 Crucial M4 Corsair H100i Windows 7 
MonitorMonitorKeyboardPower
Dell U2713HM Crossover 27Q (3x) Ducky TKL OCN-Version Corsair AX650 
CaseMouseMouse PadAudio
Corsair C70 (Military Green) Razer DeathAdder BE Steelseries QCK+ Beats Pro 
AudioAudio
Bose Surround Sound 5.1 Beats Tours 
  hide details  
Reply
Swag's Venus
(18 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k @ 4.8GHz Asus Maximus V Gene EVGA GTX 680 G.Skill RipJaws X 16GB (2x8GB) 
Hard DriveHard DriveCoolingOS
Samsung 830 Crucial M4 Corsair H100i Windows 7 
MonitorMonitorKeyboardPower
Dell U2713HM Crossover 27Q (3x) Ducky TKL OCN-Version Corsair AX650 
CaseMouseMouse PadAudio
Corsair C70 (Military Green) Razer DeathAdder BE Steelseries QCK+ Beats Pro 
AudioAudio
Bose Surround Sound 5.1 Beats Tours 
  hide details  
Reply
post #113 of 33565
Quote:
Originally Posted by PCWargamer View Post

Why PRO over ULTRA?

Main reason is because its specification list it has higher thermal conductivity rating. The other reason is because I like how it applies.

B.K.T.
(24 items)
 
  
CPUMotherboardGraphicsGraphics
De-Lidded direct die mount Intel i7-4790k No IHS ASUS Z97 WS Sapphire HD7950 OC 950mhz Edition Sapphire HD7950 Vapor X 
RAMHard DriveHard DriveHard Drive
GSkill 2400mhz CL9  Samsung 840 caviar black Hitachi 
Hard DriveOptical DriveCoolingCooling
OCZ AGILITY 4 LG 16x BD burner DT Sniper CPU block Watercool HEATKILLER® GPU-X³ 79X0 Ni-Bl  
CoolingCoolingCoolingOS
Swiftech pump 655 Alphacool NexXxos UT 60 420mm 3x140mm Bgears 1800 RPM fans in pull on radiator Windows 7 Pro 64bit 
MonitorKeyboardPowerCase
BenQ XL2410T SS 6gv2 Seasonic Platinum 860 Silverstone Raven RV02-BW 
MouseMouseMouse PadAudio
Steel Series sensei Steel Series sensei SS Experience I-2, SS 9HD Audio Technica ATH-AD900 
  hide details  
Reply
B.K.T.
(24 items)
 
  
CPUMotherboardGraphicsGraphics
De-Lidded direct die mount Intel i7-4790k No IHS ASUS Z97 WS Sapphire HD7950 OC 950mhz Edition Sapphire HD7950 Vapor X 
RAMHard DriveHard DriveHard Drive
GSkill 2400mhz CL9  Samsung 840 caviar black Hitachi 
Hard DriveOptical DriveCoolingCooling
OCZ AGILITY 4 LG 16x BD burner DT Sniper CPU block Watercool HEATKILLER® GPU-X³ 79X0 Ni-Bl  
CoolingCoolingCoolingOS
Swiftech pump 655 Alphacool NexXxos UT 60 420mm 3x140mm Bgears 1800 RPM fans in pull on radiator Windows 7 Pro 64bit 
MonitorKeyboardPowerCase
BenQ XL2410T SS 6gv2 Seasonic Platinum 860 Silverstone Raven RV02-BW 
MouseMouseMouse PadAudio
Steel Series sensei Steel Series sensei SS Experience I-2, SS 9HD Audio Technica ATH-AD900 
  hide details  
Reply
post #114 of 33565
Quote:
Originally Posted by SonDa5 View Post

Warning: Spoiler! (Click to show)
Main reason is because its specification list it has higher thermal conductivity rating. The other reason is because I like how it applies.

That looks mighty impressive! Instant mirror-like finish tongue.gif
Wonder how the Ultra will look like...Gonna search for a similar vid.

EDIT: DUH!

After seeing this, wouldn't it be a bit too much for just the die if we used a similar sized drop on it and then spread it with the mounting pressure? I mean, it covers the whole ihs with that application.
Edited by ivanlabrie - 10/7/12 at 7:44am
post #115 of 33565
Do you guys facing any issues running delidded proc? I've watch this: http://www.youtube.com/watch?v=XXs0I5kuoX4 & he's not using any double-sided tape to put the ihs back on top but only using the cpu retention bracket to keep the ihs in place. Is it safe? Do you guys think the pressure from the hsf will damaged the pcb?
post #116 of 33565
Quote:
Originally Posted by ketapang View Post

Do you guys facing any issues running delidded proc? I've watch this: http://www.youtube.com/watch?v=XXs0I5kuoX4 & he's not using any double-sided tape to put the ihs back on top but only using the cpu retention bracket to keep the ihs in place. Is it safe? Do you guys think the pressure from the hsf will damaged the pcb?

If you have the IHS on, it would be exact same as a CPU that wasn't delidded. The pressure would still be the same on the die and on the PCB as the non-delidded CPU. A delidded CPU that doesn't have the IHS on will of course have more pressure put on the die, but not on the PCB. The PCB would be about the same. The critical point in making sure that not too much pressure is applied to the die is to use washers to space out the extra space you now have because you don't have the IHS on.
Swag's Venus
(18 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k @ 4.8GHz Asus Maximus V Gene EVGA GTX 680 G.Skill RipJaws X 16GB (2x8GB) 
Hard DriveHard DriveCoolingOS
Samsung 830 Crucial M4 Corsair H100i Windows 7 
MonitorMonitorKeyboardPower
Dell U2713HM Crossover 27Q (3x) Ducky TKL OCN-Version Corsair AX650 
CaseMouseMouse PadAudio
Corsair C70 (Military Green) Razer DeathAdder BE Steelseries QCK+ Beats Pro 
AudioAudio
Bose Surround Sound 5.1 Beats Tours 
  hide details  
Reply
Swag's Venus
(18 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k @ 4.8GHz Asus Maximus V Gene EVGA GTX 680 G.Skill RipJaws X 16GB (2x8GB) 
Hard DriveHard DriveCoolingOS
Samsung 830 Crucial M4 Corsair H100i Windows 7 
MonitorMonitorKeyboardPower
Dell U2713HM Crossover 27Q (3x) Ducky TKL OCN-Version Corsair AX650 
CaseMouseMouse PadAudio
Corsair C70 (Military Green) Razer DeathAdder BE Steelseries QCK+ Beats Pro 
AudioAudio
Bose Surround Sound 5.1 Beats Tours 
  hide details  
Reply
post #117 of 33565
Thread Starter 
Lol I just put my ihs and used my bracket and went.....now run!
post #118 of 33565
Quote:
Originally Posted by Valgaur View Post

Lol I just put my ihs and used my bracket and went.....now run!

That's basically what I did. I put my CPU (bare) on a sheet of paper on my desk, applied Liquid Pro to the die and put it on the socket. Put on the IHS and just put the bracket on and I just assume that the bracket put the IHS correctly.
Swag's Venus
(18 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k @ 4.8GHz Asus Maximus V Gene EVGA GTX 680 G.Skill RipJaws X 16GB (2x8GB) 
Hard DriveHard DriveCoolingOS
Samsung 830 Crucial M4 Corsair H100i Windows 7 
MonitorMonitorKeyboardPower
Dell U2713HM Crossover 27Q (3x) Ducky TKL OCN-Version Corsair AX650 
CaseMouseMouse PadAudio
Corsair C70 (Military Green) Razer DeathAdder BE Steelseries QCK+ Beats Pro 
AudioAudio
Bose Surround Sound 5.1 Beats Tours 
  hide details  
Reply
Swag's Venus
(18 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k @ 4.8GHz Asus Maximus V Gene EVGA GTX 680 G.Skill RipJaws X 16GB (2x8GB) 
Hard DriveHard DriveCoolingOS
Samsung 830 Crucial M4 Corsair H100i Windows 7 
MonitorMonitorKeyboardPower
Dell U2713HM Crossover 27Q (3x) Ducky TKL OCN-Version Corsair AX650 
CaseMouseMouse PadAudio
Corsair C70 (Military Green) Razer DeathAdder BE Steelseries QCK+ Beats Pro 
AudioAudio
Bose Surround Sound 5.1 Beats Tours 
  hide details  
Reply
post #119 of 33565
Someone should find some glue similar to the one that was originally used on the ihs so people aren't just setting the ihs on the die. I watched a video of someone who didnt use any glue to stick it to the PCB and it looks very sketchy attaching it.
 
Philip J. Fry
(6 items)
 
Turanga Leela
(1 item)
 
CPUMotherboardGraphicsRAM
i5 4690K 4.2ghz 1.15v Asus Z97I-Plus EVGA GTX1070 ACX 3.0 HyperX 16gb 1866mhz 
Hard DriveHard DriveCoolingOS
Samsung 850 Evo 250GB Western Digital Caviar Black1TB NZXT Kraken X41 Windows 7 Ultimate 
MonitorMonitorMonitorPower
ASUS VN247H-P ASUS VN247H-P ASUS VN247H-P SPI Magna Gold 750w 
CaseMouseMouse PadAudio
Corsair Obsidian 250D Zowie EC1-A Steelseries QCK XXL Fostex TH-X00 Mahogany 
AudioAudioAudio
Fiio E10 Olympus Modmic 4.0 Beyerdynamic DT770 80ohm Removable Cable Mod 
CPUGraphicsRAMHard Drive
Intel Core i5 M 480 Nvidia GeForce 310M 4gb Samsung ram 640gb Samsung HM641JI 
OSOther
Windows 7 Home Premium Samsung QX410 Laptop 
Keyboard
Which one? :P 
  hide details  
Reply
 
Philip J. Fry
(6 items)
 
Turanga Leela
(1 item)
 
CPUMotherboardGraphicsRAM
i5 4690K 4.2ghz 1.15v Asus Z97I-Plus EVGA GTX1070 ACX 3.0 HyperX 16gb 1866mhz 
Hard DriveHard DriveCoolingOS
Samsung 850 Evo 250GB Western Digital Caviar Black1TB NZXT Kraken X41 Windows 7 Ultimate 
MonitorMonitorMonitorPower
ASUS VN247H-P ASUS VN247H-P ASUS VN247H-P SPI Magna Gold 750w 
CaseMouseMouse PadAudio
Corsair Obsidian 250D Zowie EC1-A Steelseries QCK XXL Fostex TH-X00 Mahogany 
AudioAudioAudio
Fiio E10 Olympus Modmic 4.0 Beyerdynamic DT770 80ohm Removable Cable Mod 
CPUGraphicsRAMHard Drive
Intel Core i5 M 480 Nvidia GeForce 310M 4gb Samsung ram 640gb Samsung HM641JI 
OSOther
Windows 7 Home Premium Samsung QX410 Laptop 
Keyboard
Which one? :P 
  hide details  
Reply
post #120 of 33565
Quote:
Originally Posted by HPE1000 View Post

Someone should find some glue similar to the one that was originally used on the ihs so people aren't just setting the ihs on the die. I watched a video of someone who didnt use any glue to stick it to the PCB and it looks very sketchy attaching it.

Well, as long as you use the bracket or you put the heatsink on fairly tight, you won't have any problems. What happens if you make a mistake in applying the paste in the die and you glue it on? You'd have to re-delid it which would be scary. Also, the glue that you are looking for is a Black Epoxy Adhesive like I said before. I have used it on my other things like my GPU in some cases. It's the closest thing you can get to what the PC component manufacturers use.
Swag's Venus
(18 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k @ 4.8GHz Asus Maximus V Gene EVGA GTX 680 G.Skill RipJaws X 16GB (2x8GB) 
Hard DriveHard DriveCoolingOS
Samsung 830 Crucial M4 Corsair H100i Windows 7 
MonitorMonitorKeyboardPower
Dell U2713HM Crossover 27Q (3x) Ducky TKL OCN-Version Corsair AX650 
CaseMouseMouse PadAudio
Corsair C70 (Military Green) Razer DeathAdder BE Steelseries QCK+ Beats Pro 
AudioAudio
Bose Surround Sound 5.1 Beats Tours 
  hide details  
Reply
Swag's Venus
(18 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k @ 4.8GHz Asus Maximus V Gene EVGA GTX 680 G.Skill RipJaws X 16GB (2x8GB) 
Hard DriveHard DriveCoolingOS
Samsung 830 Crucial M4 Corsair H100i Windows 7 
MonitorMonitorKeyboardPower
Dell U2713HM Crossover 27Q (3x) Ducky TKL OCN-Version Corsair AX650 
CaseMouseMouse PadAudio
Corsair C70 (Military Green) Razer DeathAdder BE Steelseries QCK+ Beats Pro 
AudioAudio
Bose Surround Sound 5.1 Beats Tours 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide