Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 1120

post #11191 of 33682
Alright so I am going to mess with settings later see if I can get 5 at lower than 1.57 temps arnt an issue but that seems like too much voltage for 5. For now tho is 4.9 at 1.45 fine for a 24 hour oc normally I leave it at 4.6 but my temps hot 73 max on ibt at 4.9 so temps are no longer an issue. Also I have pll overvaltage enabled at 4.6 GHz with max temps of 62 ibt max stress. Would the temp difference be much with it disabled? not that im complaining lol
R@WR
(16 items)
 
Rawr V2
(16 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 3770k Z77 MPower (MS-7751) Asus Radeon R9 290 Corsair Dominator DHX Pro 
Hard DriveHard DriveOptical DriveCooling
OCZ Vertex 3 SSD Seagate Barracuda LG Super Multi XSPC Raystorm laing ddc 3.25, ex 240 Swiftech X... 
OSMonitorKeyboardPower
Windows 8.1 Pro LG 24inch led Backlit Corsair K60 XFX 850WPro Fully Modular 
CaseMouseMouse PadAudio
Bitfenix Ronin Steel Series Sensei Razer Goliathus Steel Series Siberius V2 
CPUMotherboardGraphicsRAM
3770k Msi z77 mpower EVGA GTX 980 Corsair Dominator 
Hard DriveHard DriveCoolingOS
WD Blue OCZ Vertex 3 SSD Custom Water Cooling, Darkside 6 port reservoir... Windows 8.1 
MonitorKeyboardPowerCase
LG 24 inch 1080P CM Quickfire Rapid, custom keys from WASD XFX Pro Fully modular 850W Gold Corsair Air 540 
MouseMouse PadAudioAudio
Corsair M65 Razer Goliathus Roccat Kave True 5.1 Headset Asus Xonar DX 7.1 Sound card 
  hide details  
Reply
R@WR
(16 items)
 
Rawr V2
(16 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 3770k Z77 MPower (MS-7751) Asus Radeon R9 290 Corsair Dominator DHX Pro 
Hard DriveHard DriveOptical DriveCooling
OCZ Vertex 3 SSD Seagate Barracuda LG Super Multi XSPC Raystorm laing ddc 3.25, ex 240 Swiftech X... 
OSMonitorKeyboardPower
Windows 8.1 Pro LG 24inch led Backlit Corsair K60 XFX 850WPro Fully Modular 
CaseMouseMouse PadAudio
Bitfenix Ronin Steel Series Sensei Razer Goliathus Steel Series Siberius V2 
CPUMotherboardGraphicsRAM
3770k Msi z77 mpower EVGA GTX 980 Corsair Dominator 
Hard DriveHard DriveCoolingOS
WD Blue OCZ Vertex 3 SSD Custom Water Cooling, Darkside 6 port reservoir... Windows 8.1 
MonitorKeyboardPowerCase
LG 24 inch 1080P CM Quickfire Rapid, custom keys from WASD XFX Pro Fully modular 850W Gold Corsair Air 540 
MouseMouse PadAudioAudio
Corsair M65 Razer Goliathus Roccat Kave True 5.1 Headset Asus Xonar DX 7.1 Sound card 
  hide details  
Reply
post #11192 of 33682
Quote:
Originally Posted by RMK221 View Post

Going be delidding my 3770k in a few weeks, have a Sabertooth z77. Was wondering if anyone has used the h110 by Corsair (http://www.newegg.com/Product/Product.aspx?Item=N82E16835181035) ? And if it's worth it to do that or just go with the h100?

Thanks in advance
I have the H100i and would recommend waiting a couple weeks and get the Swiftech H220. Unless you want to go air, then like VonDutch said, the Noctua is good.
Ivy 5.0
(14 items)
 
Ivy 4.8
(15 items)
 
 
CPUMotherboardGraphicsRAM
i7-3770k 5.0 24/7 Maximus V Formula EVGA GTX 690 G.Skill Trident X 2400 (2x8gb) 
Hard DriveOptical DriveCoolingOS
Samsung 840 Pro 512GB Pioneer BD-RW Swiftech H220 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
2 x NEC 30" Logitech G15 Corsair AX1200 NZXT Switch 810 
MouseAudio
Logitech G9x Logitech G51 
  hide details  
Reply
Ivy 5.0
(14 items)
 
Ivy 4.8
(15 items)
 
 
CPUMotherboardGraphicsRAM
i7-3770k 5.0 24/7 Maximus V Formula EVGA GTX 690 G.Skill Trident X 2400 (2x8gb) 
Hard DriveOptical DriveCoolingOS
Samsung 840 Pro 512GB Pioneer BD-RW Swiftech H220 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
2 x NEC 30" Logitech G15 Corsair AX1200 NZXT Switch 810 
MouseAudio
Logitech G9x Logitech G51 
  hide details  
Reply
post #11193 of 33682
Quote:
Originally Posted by chann3l View Post

Alright so I am going to mess with settings later see if I can get 5 at lower than 1.57 temps arnt an issue but that seems like too much voltage for 5. For now tho is 4.9 at 1.45 fine for a 24 hour oc normally I leave it at 4.6 but my temps hot 73 max on ibt at 4.9 so temps are no longer an issue. Also I have pll overvaltage enabled at 4.6 GHz with max temps of 62 ibt max stress. Would the temp difference be much with it disabled? not that im complaining lol

any C or degree you can lower is better for your oc i think,
what do you vcore wise to run 4.6 and 4.7ghz stable?
i dont think its noticeable difference, but you can keep a eye on it,
if you disable..i never needed it with my oc's, so im curious ..lol
i leave it on auto always on my mobo..
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
post #11194 of 33682
Quote:
Originally Posted by VonDutch View Post

you use a wireless keyboard?
connect to a usb 2 port can help also..
if you get that blck set to 100, and set ram to 1600 for now,
you prolly need less vcore to make the 5.0ghz run,
also did you try run 5.0ghz without pll overvoltage enabled, or set to auto?
with those very high oc's every setting gets important, that i know,
even that blck 100.52 can mess things up..

No, I use a wired one. cmstorm trigger. I thought that would be it but it just simply doesnt want to boot.
I want to just get in there so I can change the intel stepping so my i7 doesnt run 3.8 24/7 because my temps are getting too high for my comfort with these newer games coming out.
post #11195 of 33682
Quote:
Originally Posted by justanoldman View Post

I have the H100i and would recommend waiting a couple weeks and get the Swiftech H220. Unless you want to go air, then like VonDutch said, the Noctua is good.

yea, even my Scythe Mugen 2 Rev. B was enough to shave off more then 30C smile.gif
only cost me 35 euro..i pay about 100 euro for the 100i, but prizes are different in the usa
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
post #11196 of 33682
For any of you that have tried getting rid of the IHS and put your cooler block directly on the die: Was it worth it? Do you think it is safe long term? Are you worried about putting either too little or too much pressure on the die? Do you have to worry about scratching or damaging the die in anyway since most coolers have some play in them while installing?
Ivy 5.0
(14 items)
 
Ivy 4.8
(15 items)
 
 
CPUMotherboardGraphicsRAM
i7-3770k 5.0 24/7 Maximus V Formula EVGA GTX 690 G.Skill Trident X 2400 (2x8gb) 
Hard DriveOptical DriveCoolingOS
Samsung 840 Pro 512GB Pioneer BD-RW Swiftech H220 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
2 x NEC 30" Logitech G15 Corsair AX1200 NZXT Switch 810 
MouseAudio
Logitech G9x Logitech G51 
  hide details  
Reply
Ivy 5.0
(14 items)
 
Ivy 4.8
(15 items)
 
 
CPUMotherboardGraphicsRAM
i7-3770k 5.0 24/7 Maximus V Formula EVGA GTX 690 G.Skill Trident X 2400 (2x8gb) 
Hard DriveOptical DriveCoolingOS
Samsung 840 Pro 512GB Pioneer BD-RW Swiftech H220 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
2 x NEC 30" Logitech G15 Corsair AX1200 NZXT Switch 810 
MouseAudio
Logitech G9x Logitech G51 
  hide details  
Reply
post #11197 of 33682
Quote:
Originally Posted by DiamondCut View Post

No, I use a wired one. cmstorm trigger. I thought that would be it but it just simply doesnt want to boot.
I want to just get in there so I can change the intel stepping so my i7 doesnt run 3.8 24/7 because my temps are getting too high for my comfort with these newer games coming out.

yea ok, i was thinking about i couldnt use usb3 with my keyboard,
not sure why, but couldnt use it in the bios..lol so changed it to usb2 and it works,
maybe the bios doenst have native usb3 support?
do you have another keyboard you can try with?
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
post #11198 of 33682
Temps after 5hrs of F@H - remember I'm de-lidded - I think I'm going to RMA my antec lol.

post #11199 of 33682
Per this club:
3770k, posted pics already, hottest to hottest core went from 77c to 58c =-19c at 4.5 using IBT standard, with CLU on the die, AS5 on top of the IHS. MHz gained=300 for actual day to day use. Normal OC I am trying to get stable for 24/7 is 5.0. Did I forget anything?

Crazy max OC, one time shot:
http://valid.canardpc.com/2683687

Edited by justanoldman - 2/7/13 at 9:10am
Ivy 5.0
(14 items)
 
Ivy 4.8
(15 items)
 
 
CPUMotherboardGraphicsRAM
i7-3770k 5.0 24/7 Maximus V Formula EVGA GTX 690 G.Skill Trident X 2400 (2x8gb) 
Hard DriveOptical DriveCoolingOS
Samsung 840 Pro 512GB Pioneer BD-RW Swiftech H220 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
2 x NEC 30" Logitech G15 Corsair AX1200 NZXT Switch 810 
MouseAudio
Logitech G9x Logitech G51 
  hide details  
Reply
Ivy 5.0
(14 items)
 
Ivy 4.8
(15 items)
 
 
CPUMotherboardGraphicsRAM
i7-3770k 5.0 24/7 Maximus V Formula EVGA GTX 690 G.Skill Trident X 2400 (2x8gb) 
Hard DriveOptical DriveCoolingOS
Samsung 840 Pro 512GB Pioneer BD-RW Swiftech H220 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
2 x NEC 30" Logitech G15 Corsair AX1200 NZXT Switch 810 
MouseAudio
Logitech G9x Logitech G51 
  hide details  
Reply
post #11200 of 33682
Thats a crazy low voltage for 5.5!, I know i needed 1.768v for same speed

http://valid.canardpc.com/show_oc.php?id=2572213

Haven't been any higher than 5.2 since then lol
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide