Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 1147

post #11461 of 33641
Quote:
Originally Posted by stickg1 View Post

Lol, this Celeron D 356 I'm playing with gets 4.5 GFlops on stock 3.33GHz, time to crank this thing up and make it sweat.

Quote:
Originally Posted by stickg1 View Post

Where's Ivan? I need help torturing an Intel Celeron D 356 and some 533MHz Samsung DDR2 modules...


Here I am...delid that sucker and clock it to the moon, OR get a pot and freeze it for some 8ghz action. wink.gif
Samsung ddr2 ain't too good normally but just drop the ram ratio to keep the ram clocks slow whilst bumping the fsb like mad. Give that thing 1.45v and see how far it'll go without cold first.
post #11462 of 33641
Quote:
Originally Posted by FtW 420 View Post

Even at 5.5Ghz with HT I was hitting around 128Gflops. Memory does have a small effect on the gflops.
55ibtvh.jpg
I would agree that gigaflops aren't of much importance, disabling HT decreases overall performance yet increases gigaflops. Also AVX, sp1 can double the gigaflops, yet unless running something that uses AVX a computer that gets 60 gflops can have the exact same performance as a machine getting 100 gflops +.
But for a particular single rig, when testing & looking at the gigaflops, increasing the gflpos does basically increase performance (not by disabling HT, but getting higher at however the rig is set up).
Looking at your profile on the bot, you moved up +5675 places in the enthusiast league today, not bad!
It is addictive, you're gonna love the little devil, he does great work & builds some of the best!

Thanks I've earned almost 20 points overall today. Might try putting my gpu in my loop in the next month or so unlock the unofficial ocing on afterburner and see if i can push past 1100 core and 1575 mem thumb.gif
R@WR
(16 items)
 
Rawr V2
(16 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 3770k Z77 MPower (MS-7751) Asus Radeon R9 290 Corsair Dominator DHX Pro 
Hard DriveHard DriveOptical DriveCooling
OCZ Vertex 3 SSD Seagate Barracuda LG Super Multi XSPC Raystorm laing ddc 3.25, ex 240 Swiftech X... 
OSMonitorKeyboardPower
Windows 8.1 Pro LG 24inch led Backlit Corsair K60 XFX 850WPro Fully Modular 
CaseMouseMouse PadAudio
Bitfenix Ronin Steel Series Sensei Razer Goliathus Steel Series Siberius V2 
CPUMotherboardGraphicsRAM
3770k Msi z77 mpower EVGA GTX 980 Corsair Dominator 
Hard DriveHard DriveCoolingOS
WD Blue OCZ Vertex 3 SSD Custom Water Cooling, Darkside 6 port reservoir... Windows 8.1 
MonitorKeyboardPowerCase
LG 24 inch 1080P CM Quickfire Rapid, custom keys from WASD XFX Pro Fully modular 850W Gold Corsair Air 540 
MouseMouse PadAudioAudio
Corsair M65 Razer Goliathus Roccat Kave True 5.1 Headset Asus Xonar DX 7.1 Sound card 
  hide details  
Reply
R@WR
(16 items)
 
Rawr V2
(16 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 3770k Z77 MPower (MS-7751) Asus Radeon R9 290 Corsair Dominator DHX Pro 
Hard DriveHard DriveOptical DriveCooling
OCZ Vertex 3 SSD Seagate Barracuda LG Super Multi XSPC Raystorm laing ddc 3.25, ex 240 Swiftech X... 
OSMonitorKeyboardPower
Windows 8.1 Pro LG 24inch led Backlit Corsair K60 XFX 850WPro Fully Modular 
CaseMouseMouse PadAudio
Bitfenix Ronin Steel Series Sensei Razer Goliathus Steel Series Siberius V2 
CPUMotherboardGraphicsRAM
3770k Msi z77 mpower EVGA GTX 980 Corsair Dominator 
Hard DriveHard DriveCoolingOS
WD Blue OCZ Vertex 3 SSD Custom Water Cooling, Darkside 6 port reservoir... Windows 8.1 
MonitorKeyboardPowerCase
LG 24 inch 1080P CM Quickfire Rapid, custom keys from WASD XFX Pro Fully modular 850W Gold Corsair Air 540 
MouseMouse PadAudioAudio
Corsair M65 Razer Goliathus Roccat Kave True 5.1 Headset Asus Xonar DX 7.1 Sound card 
  hide details  
Reply
post #11463 of 33641
especilally if you got the much hotter i7 3770k. no better value than high end cpu cooler temp drop with just a razor blade, and high end thermal paste for under $20, if not $5.
Build In Progress
(17 items)
 
   
CPUMotherboardGraphicsRAM
Haswell i7-4770K 4.8GHz@1.452v/1.97vRIN Gigabyte Z87X-UD3H Older Gigabyte 7950 (H60 Mod) 2x4GB Gskill 2400CL11 Hynix CFRs 
Hard DriveCoolingOSMonitor
Samsung 830 128gb Corsair H110 w/4x 140mm Yate Loon High Blues W7 x64 Ultimate Yarrgh Matey Dell U2312HM Matte IPS 1080p 
MonitorMonitorKeyboardPower
Sanyo DP19640 18.5" 768p KDS Rad-7xp 1024p CM Storm Quickfire Rapids Brown Rosewill Capstone 750 
CaseMouseMouse PadAudio
Bitfenix Shinobi Modded CM Storm Spawn Steelseries Diablo 3 2 set CD Speaker + Big Sub 
Other
Bitfenix Recon Fan Controller Moded 
CPUMotherboardGraphicsRAM
Delidded i7-3770K 5GHz@1.499 Gigabyte Z77X-UD5H 1.1 Sapphire Dual-X 7950 3L Boost 4x2GB Mushkin Ridgeback 2200mhz 8/11/8/27 1.75v... 
Hard DriveCoolingCoolingCooling
Intel X25-M 80GB SSD NH-D14 SE2011 Noctua 120/140/140 Fans 3 x Yate Loon Mediums (Petras) 2 x NZXT Havik 140mm Fans 
OSMonitorMonitorKeyboard
Hax'd W7 Ultimate 64-bit Sanyo DP19640 19'' KDS Radius Rad-7xp 17'' Ducky 1087 MX Brown 10keyless 
PowerCaseMouseMouse Pad
Rosewill Capstone 550w Modular NZXT Source 210 w/Modded Window Razer Deathadder 3.5G Steelseries Blizzcon D3 
AudioAudioOtherOther
Phillips FW-C250 2 Speaker Set w/3 CD Changer JBL Sub 6 Subwoofer NZXT Sleeved LED Strip 1m Blue NZXT Sentry 2 Fan Controller 
Other
Colonial Blue Paracord Sleeving 
CPUMotherboardGraphicsRAM
Phenom ii X4 955C2, $31, 5 broken pins, works! ... Biostar A770e3 6.3 Red&Black MSI GTX 460 768mb Twin Frozr II 2 x 2GB Kingston HyperX 1333 OC to 1348CL7@1.65v 
Hard DriveCoolingCoolingCooling
Intel X25-M G2 80GB SSD NH-D14 SE2011 6 x Case Fans (4 x YL-M, NZXT case fan, CM Hype... Jerryrigged Chipset-Northbridge 80mm HSF 
CoolingOSMonitorKeyboard
Jerryrigged VRM Heatsink (sawed off stock AM2 h... Hax'd W7 Ultimate 64bit Sanyo DP19640 19"1360x768 Ducky Cherry Browns 10keyless 
PowerCaseMouseMouse Pad
Antec Earthwatts 430D NZXT Gamma Steelseries Kinzu Optical Steelseries Blizzcon Diablo 3 
  hide details  
Reply
Build In Progress
(17 items)
 
   
CPUMotherboardGraphicsRAM
Haswell i7-4770K 4.8GHz@1.452v/1.97vRIN Gigabyte Z87X-UD3H Older Gigabyte 7950 (H60 Mod) 2x4GB Gskill 2400CL11 Hynix CFRs 
Hard DriveCoolingOSMonitor
Samsung 830 128gb Corsair H110 w/4x 140mm Yate Loon High Blues W7 x64 Ultimate Yarrgh Matey Dell U2312HM Matte IPS 1080p 
MonitorMonitorKeyboardPower
Sanyo DP19640 18.5" 768p KDS Rad-7xp 1024p CM Storm Quickfire Rapids Brown Rosewill Capstone 750 
CaseMouseMouse PadAudio
Bitfenix Shinobi Modded CM Storm Spawn Steelseries Diablo 3 2 set CD Speaker + Big Sub 
Other
Bitfenix Recon Fan Controller Moded 
CPUMotherboardGraphicsRAM
Delidded i7-3770K 5GHz@1.499 Gigabyte Z77X-UD5H 1.1 Sapphire Dual-X 7950 3L Boost 4x2GB Mushkin Ridgeback 2200mhz 8/11/8/27 1.75v... 
Hard DriveCoolingCoolingCooling
Intel X25-M 80GB SSD NH-D14 SE2011 Noctua 120/140/140 Fans 3 x Yate Loon Mediums (Petras) 2 x NZXT Havik 140mm Fans 
OSMonitorMonitorKeyboard
Hax'd W7 Ultimate 64-bit Sanyo DP19640 19'' KDS Radius Rad-7xp 17'' Ducky 1087 MX Brown 10keyless 
PowerCaseMouseMouse Pad
Rosewill Capstone 550w Modular NZXT Source 210 w/Modded Window Razer Deathadder 3.5G Steelseries Blizzcon D3 
AudioAudioOtherOther
Phillips FW-C250 2 Speaker Set w/3 CD Changer JBL Sub 6 Subwoofer NZXT Sleeved LED Strip 1m Blue NZXT Sentry 2 Fan Controller 
Other
Colonial Blue Paracord Sleeving 
CPUMotherboardGraphicsRAM
Phenom ii X4 955C2, $31, 5 broken pins, works! ... Biostar A770e3 6.3 Red&Black MSI GTX 460 768mb Twin Frozr II 2 x 2GB Kingston HyperX 1333 OC to 1348CL7@1.65v 
Hard DriveCoolingCoolingCooling
Intel X25-M G2 80GB SSD NH-D14 SE2011 6 x Case Fans (4 x YL-M, NZXT case fan, CM Hype... Jerryrigged Chipset-Northbridge 80mm HSF 
CoolingOSMonitorKeyboard
Jerryrigged VRM Heatsink (sawed off stock AM2 h... Hax'd W7 Ultimate 64bit Sanyo DP19640 19"1360x768 Ducky Cherry Browns 10keyless 
PowerCaseMouseMouse Pad
Antec Earthwatts 430D NZXT Gamma Steelseries Kinzu Optical Steelseries Blizzcon Diablo 3 
  hide details  
Reply
post #11464 of 33641
Quote:
Originally Posted by ivanlabrie View Post


Here I am...delid that sucker and clock it to the moon, OR get a pot and freeze it for some 8ghz action. wink.gif
Samsung ddr2 ain't too good normally but just drop the ram ratio to keep the ram clocks slow whilst bumping the fsb like mad. Give that thing 1.45v and see how far it'll go without cold first.

Unfortunately I cant seem to adjust the RAM multiplier on this motherboard. Biostar TP35D2-A7

Oh well, I can't seem to get past 4.55GHz, pisses me off because temps are still in the low 50's with this CM TX3.

The RAM says it will run 800MHz at 6-6-6-18 even though the stock specs are 533 4-4-4-12.

I'm going to keep trying, what's a safe voltage for DDR2? Actually it doesn't matter, I ordered 4GB of Hynix 800MHz and a Q6600 to replace this but figured I would have fun while I wait. I don't mind ruining $10 worth of RAM while I wait for a better set, as long as I have fun doing it..
post #11465 of 33641
Quote:
Originally Posted by BradleyW View Post

I sit at 70c full load at 1.2v
I am so tempted to remove the lid, or just buy a H100i smile.gif
Delid? Definitely (as long as you can afford another chip if you make a mistake)
H100i? No, try the delid first and see how it goes, then if need be you can look into better cooling. The H220 looks to be a better choice when it comes out in a couple weeks.
Ivy 5.0
(14 items)
 
Ivy 4.8
(15 items)
 
 
CPUMotherboardGraphicsRAM
i7-3770k 5.0 24/7 Maximus V Formula EVGA GTX 690 G.Skill Trident X 2400 (2x8gb) 
Hard DriveOptical DriveCoolingOS
Samsung 840 Pro 512GB Pioneer BD-RW Swiftech H220 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
2 x NEC 30" Logitech G15 Corsair AX1200 NZXT Switch 810 
MouseAudio
Logitech G9x Logitech G51 
  hide details  
Reply
Ivy 5.0
(14 items)
 
Ivy 4.8
(15 items)
 
 
CPUMotherboardGraphicsRAM
i7-3770k 5.0 24/7 Maximus V Formula EVGA GTX 690 G.Skill Trident X 2400 (2x8gb) 
Hard DriveOptical DriveCoolingOS
Samsung 840 Pro 512GB Pioneer BD-RW Swiftech H220 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
2 x NEC 30" Logitech G15 Corsair AX1200 NZXT Switch 810 
MouseAudio
Logitech G9x Logitech G51 
  hide details  
Reply
post #11466 of 33641
Thread Starter 
Quote:
Originally Posted by Belial View Post

Okay, so this is the most I got the better of those 2 i5 3570ks I had:

OCN name: Belial
CPU: i5-3570k
on die-TIM: PK-3
ihs-TIM: PK-3
Mhz gained: -
OC after delid: 4.5ghz@1.3vcore
Temp drops: ~15*C
CPU-Z validation of max OC:

4.6ghz@1.416vcore was the most I could get that chip. I believe 4.7ghz would require around 1.51, 1.52vcore (was failing after 12 hours in p95 at 1.5).

However, I was able to exchange my i5-3570K (the bad one, the one I didn't delid) for an i7-3770k for $40 at MC, and then put the better, delidded i5-3570k in a build I made for someone else (they don't even know what overclocking is, I just did a 1ghz+ overclock for them for value).

This i7-3770K is just like my i5-3570K - boot up 4.5ghz, use GTL, got to 5ghz, freeze screen at 5.1ghz. Except it does that at 1.3vcore, instead of 1.5vcore ^^
So I think I have a really, really good i7 here.

I have gone ahead and delidded it, as well as recorded a custom small fft temperature test on 4.5ghz/1.3vcore before, and after delidding.

OCN name: Belial
CPU: i5-3770K
on die-TIM: PK-3
ihs-TIM: PK-3
Mhz gained: -
OC after delid: -
Temp drops: 15+
CPU-Z validation of max OC: -

Before Delid: 89*C max (wow 3770k is a lot hotter than 3570k, I was getting this kind of temp before delid at like 1.5vcore I think).
After Delid: 76*C max (done the next day, in a room that's at least 5*F hotter...).

I believe the net result is somewhere between a 15-20*C temp drop. Those results are similar to what I believe I got last time, with the 3570k.

Pics:






Will be playing around, I'll add a cpu validation for 24 hours and all that later.

You are in! Throw or awesome sig on and show your skills! thumb.gif
Quote:
Originally Posted by $ilent View Post



My submission smile.gif

edit: Had to do another screenie, my notepad didnt say 'overclock'...lol

Your in as well! Woohoo! All the new sigs! thumb.gif
Quote:
Originally Posted by BradleyW View Post

I sit at 70c full load at 1.2v
I am so tempted to remove the lid, or just buy a H100i smile.gif

Delid it. temp changes with Heatsink changes based on the Intel gap of the die and IHS wont yield much. Take off their heads!!! biggrin.gif
post #11467 of 33641
Thanks

Just for the front page I used liquid pro not ultra smile.gif

Also it could be fact I lapped the IHS or because I used liquid pro on the underside of the ihs aswell as on the die, but I'm currently folding at max temps of 67c at 5ghz with vcore of 1.35-1.40v with an air cooler!
Edited by $ilent - 2/11/13 at 4:51pm
post #11468 of 33641
Quote:
Originally Posted by $ilent View Post



My submission smile.gif

edit: Had to do another screenie, my notepad didnt say 'overclock'...lol

Nice! Is that with the ud3h? Grats on your delid! Only suggestion is if you want to join any if the stable clubs you will need to use a more current version of prime95 such as version 27.9. It uses the coding made for the newer chips called avx.
post #11469 of 33641
Quote:
Originally Posted by $ilent View Post

thanks I shot, im not sure the asrock mobo reports correct vcore so it could be higher, but i have a z77x-ud3h on route and gonna order a digi multimeter off amazon too.

BradleyW get it delidded mate, so much better afterwards. Im only using a prolimatech megahalems and I just did a reseat with the on die TIM and lapped the IHS too up to 2500 grit. Max temps I saw on p95 after 25 min or so was 73c I believe, so it gives you loads of headroom temps wise.

I see smile.gif
post #11470 of 33641
Quote:
Originally Posted by chronicfx View Post

I see smile.gif

Quote:
Originally Posted by $ilent View Post

thanks I shot, im not sure the asrock mobo reports correct vcore so it could be higher, but i have a z77x-ud3h on route and gonna order a digi multimeter off amazon too.

BradleyW get it delidded mate, so much better afterwards. Im only using a prolimatech megahalems and I just did a reseat with the on die TIM and lapped the IHS too up to 2500 grit. Max temps I saw on p95 after 25 min or so was 73c I believe, so it gives you loads of headroom temps wise.

When you change mobo and very carefully lift your CPU out by those two side notches I was able to move mine without disturbing the Tim on the die.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide