Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 1148

post #11471 of 33420
Yeah I think with max temps of 67c I got a really good CPU seat this time, so I wanna keep it intact.

In think the underside Tim application is good advice.
post #11472 of 33420
Thread Starter 
Quote:
Originally Posted by $ilent View Post

Thanks

Just for the front page I used liquid pro not ultra smile.gif

Also it could be fact I lapped the IHS or because I used liquid pro on the underside of the ihs aswell as on the die, but I'm currently folding at max temps of 67c at 5ghz with vcore of 1.35-1.40v with an air cooler!

Your Updated! thumb.giftongue.gif
post #11473 of 33420
Quote:
Originally Posted by stickg1 View Post

Unfortunately I cant seem to adjust the RAM multiplier on this motherboard. Biostar TP35D2-A7

Oh well, I can't seem to get past 4.55GHz, pisses me off because temps are still in the low 50's with this CM TX3.

The RAM says it will run 800MHz at 6-6-6-18 even though the stock specs are 533 4-4-4-12.

I'm going to keep trying, what's a safe voltage for DDR2? Actually it doesn't matter, I ordered 4GB of Hynix 800MHz and a Q6600 to replace this but figured I would have fun while I wait. I don't mind ruining $10 worth of RAM while I wait for a better set, as long as I have fun doing it..

I'd give it a shot...Grab a p45 board or a p965 for that chip and proper D9 ram, or a ddr3 x48 board if budget permits. That would be AWESOME.
I got awesome D9 sticks, two 775 chips and a 7750 BE but no am2+ nor 775 boards frown.gif
I also got a Dragon F1 pot incoming...
Quote:
Originally Posted by Valgaur View Post

Your Updated! thumb.giftongue.gif

Hey Val, got 4pts with a heaven xtreme run using a 7970 at 1100/1700mhz with an FX 8120 at 4.5ghz with my psc sticks. tongue.gif
#11 in Argentina's enthusiast league so far...Ordering a 7900 gt as we speak, might be good for some vmodd and dry ice action.
Edited by ivanlabrie - 2/11/13 at 5:43pm
post #11474 of 33420
Quote:
Originally Posted by ivanlabrie View Post

I'd give it a shot...Grab a p45 board or a p965 for that chip and proper D9 ram, or a ddr3 x48 board if budget permits. That would be AWESOME.
I got awesome D9 sticks, two 775 chips and a 7750 BE but no am2+ nor 775 boards frown.gif.

Eh I don't really want to spend much more. I bought the board, CPU, and RAM for $45. I sold one of my laptops and got a Q6600 and 6GB of Hynix 800MHz for $80 more. I'm just going to use the desktop for folding a 550ti and for the kids to mess around on.
post #11475 of 33420
So how did you guys apply your CLU? With the included brush or the rice method?
post #11476 of 33420
Quote:
Originally Posted by Snuckie7 View Post

So how did you guys apply your CLU? With the included brush or the rice method?

Gotta use the brush... it will not spread on its own because its not a conventional paste.
post #11477 of 33420
Of a non-delidded CPU, what temps should I expect from a 3570k with an NH-D14?
Swag's Venus
(18 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k @ 4.8GHz Asus Maximus V Gene EVGA GTX 680 G.Skill RipJaws X 16GB (2x8GB) 
Hard DriveHard DriveCoolingOS
Samsung 830 Crucial M4 Corsair H100i Windows 7 
MonitorMonitorKeyboardPower
Dell U2713HM Crossover 27Q (3x) Ducky TKL OCN-Version Corsair AX650 
CaseMouseMouse PadAudio
Corsair C70 (Military Green) Razer DeathAdder BE Steelseries QCK+ Beats Pro 
AudioAudio
Bose Surround Sound 5.1 Beats Tours 
  hide details  
Reply
Swag's Venus
(18 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k @ 4.8GHz Asus Maximus V Gene EVGA GTX 680 G.Skill RipJaws X 16GB (2x8GB) 
Hard DriveHard DriveCoolingOS
Samsung 830 Crucial M4 Corsair H100i Windows 7 
MonitorMonitorKeyboardPower
Dell U2713HM Crossover 27Q (3x) Ducky TKL OCN-Version Corsair AX650 
CaseMouseMouse PadAudio
Corsair C70 (Military Green) Razer DeathAdder BE Steelseries QCK+ Beats Pro 
AudioAudio
Bose Surround Sound 5.1 Beats Tours 
  hide details  
Reply
post #11478 of 33420
Thread Starter 
Quote:
Originally Posted by ivanlabrie View Post

I'd give it a shot...Grab a p45 board or a p965 for that chip and proper D9 ram, or a ddr3 x48 board if budget permits. That would be AWESOME.
I got awesome D9 sticks, two 775 chips and a 7750 BE but no am2+ nor 775 boards frown.gif
I also got a Dragon F1 pot incoming...
Hey Val, got 4pts with a heaven xtreme run using a 7970 at 1100/1700mhz with an FX 8120 at 4.5ghz with my psc sticks. tongue.gif
#11 in Argentina's enthusiast league so far...Ordering a 7900 gt as we speak, might be good for some vmodd and dry ice action.

oooooh sounds nice man! might go donate plasma soon to get money for some 9800 gtx's
Quote:
Originally Posted by Swag View Post

Of a non-delidded CPU, what temps should I expect from a 3570k with an NH-D14?

around 60 for stock adn for 4.3-4.5 giggles around 80C tops.
post #11479 of 33420
adding a second layer of CLP on the die helped a lot, must have been too thin to make proper contact, temps under Intel Burn Test got lowered by around 8C when compared to before. I still have core temps spread by around 13C between core0 (coldest) and core2 (hottest), but it was same with the best application of CLU. most likely I have a concave in IHS, but I'm not gonna lap it since I am unsure what the gray color of terminal under CPU means...

however if anybody has a dead 3770(K), I can gladly take it for the spare IHS (so I can lap it and keep mine intact) smile.gif
post #11480 of 33420
Quote:
Originally Posted by stickg1 View Post

Eh I don't really want to spend much more. I bought the board, CPU, and RAM for $45. I sold one of my laptops and got a Q6600 and 6GB of Hynix 800MHz for $80 more. I'm just going to use the desktop for folding a 550ti and for the kids to mess around on.

Use 1.45v for the cpu and go as high as it'll go...ram can take up to 2.4v I think. It's normally rated for 2.1-2.2v.
1.45v is also good for the q6600, but for really high validations you'd need cold and closer to 2v.
Quote:
Originally Posted by Valgaur View Post

oooooh sounds nice man! might go donate plasma soon to get money for some 9800 gtx's
around 60 for stock adn for 4.3-4.5 giggles around 80C tops.

I got 4.7ghz with 1.37v and 95c max temps on a similar cooler.
Well, changed my mind, I'll get an X1950 Pro, it'll arrive here with my new 3770k and pot. biggrin.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide