Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 1168

post #11671 of 33410
Quote:
Originally Posted by stickg1 View Post

It's on the back burner. My case is going to be miserable, so I either need a new case, or need to ditch my RAID0 storage drives for a single drive so I can remove enough HDD cages to make room for a radiator at the bottom of the case. So I either need a $100 case, $100 HDD, and then still need to spend another $100 to complete the loop. So it's been put off for a bit until I get some other stuff going.
It's the specific board I'm talking about. It's miserable. Unless for some reason you can't set memory faster than 533MHz on a Celeron D 356, I can't do it with this board. I'll try out when the Q6600 comes.
Might still work. You need to test it out before you give up on it. Hell I chipped a chunk of glass off my die on one of my i5's and I got all pissed but sure enough it works like a champ.

Haven't tried that board with a celly D, it's not bad for c2d at least, I'll have to try a celly in it.


Asus Commando is a good one for celery although I was just after the validation & wasn't playing with memory.
    
CPUMotherboardGraphicsRAM
i7 990x/3930k/3770k/4770k GB x58a-OC/Asus RIVE/x79 gd65/z77 mpower/z77 MV... gtx480s/gtx580s/7970s/680s/Titan Hyper/PSC/BBSE/Hynix/Samsung 
Hard DriveOptical DriveCoolingOS
HDDs/SSDs DVD Air/water/phase/copper pot Windowz 
MonitorKeyboardPowerCase
samsung 2320 Razer Lycosa ax1200 carboard box 
Mouse
Trackball 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 990x/3930k/3770k/4770k GB x58a-OC/Asus RIVE/x79 gd65/z77 mpower/z77 MV... gtx480s/gtx580s/7970s/680s/Titan Hyper/PSC/BBSE/Hynix/Samsung 
Hard DriveOptical DriveCoolingOS
HDDs/SSDs DVD Air/water/phase/copper pot Windowz 
MonitorKeyboardPowerCase
samsung 2320 Razer Lycosa ax1200 carboard box 
Mouse
Trackball 
  hide details  
Reply
post #11672 of 33410
Quote:
Originally Posted by FtW 420 View Post

Haven't tried that board with a celly D, it's not bad for c2d at least, I'll have to try a celly in it.


Asus Commando is a good one for celery although I was just after the validation & wasn't playing with memory.

I pm'd him and said the same thing...good p965 board is the best for that. But hard to find and pricey.
Do you know if the p5q-e has more ram dividers? There's one here for $55.
post #11673 of 33410
Quote:
Originally Posted by Valgaur View Post

give us pictures not just explanations, then we can diagnose this problem! thumb.gif
picture matey!
type in 1.55 and try 50 multi.. then slowly tweak it back.

Uhggg thats so scary but dude there is an insane amount of settings in the cpu features that i honestly have never heard of like voltage agent and a few others. Ill give that a go and see what i come up with.
post #11674 of 33410




It's only 2 corners, turns out the blade I used was too flimsy and trying to get under the IHS bent it.

My cell phone camera sucks, but I hope this is salvageable.
BlackBeard
(20 items)
 
  
CPUMotherboardGraphicsRAM
i7-860 @ 4.2 EVGA P55 FTW Sapphire 5770 8gb Corsair Dominator GTX 
Hard DriveHard DriveHard DriveCooling
OCZ Vertex Turbo OCZ Agility 3 Fujitsu Heat Killer 3.0 Nickel 
CoolingCoolingOSMonitor
GTX 360 EK 5770 Windows 7 Pro x64 Samsung SyncMaster 2443bwx 
MonitorKeyboardPowerCase
Dell E207WFP Razer Blackwidow Ultimate Corsair HX850 Corsair 800D 
MouseMouse PadAudioAudio
Razer Lachesis Xtrac Ripper XXL Klipsch Promedia 2.1 x-fi xtreme music 
  hide details  
Reply
BlackBeard
(20 items)
 
  
CPUMotherboardGraphicsRAM
i7-860 @ 4.2 EVGA P55 FTW Sapphire 5770 8gb Corsair Dominator GTX 
Hard DriveHard DriveHard DriveCooling
OCZ Vertex Turbo OCZ Agility 3 Fujitsu Heat Killer 3.0 Nickel 
CoolingCoolingOSMonitor
GTX 360 EK 5770 Windows 7 Pro x64 Samsung SyncMaster 2443bwx 
MonitorKeyboardPowerCase
Dell E207WFP Razer Blackwidow Ultimate Corsair HX850 Corsair 800D 
MouseMouse PadAudioAudio
Razer Lachesis Xtrac Ripper XXL Klipsch Promedia 2.1 x-fi xtreme music 
  hide details  
Reply
post #11675 of 33410
Quote:
Originally Posted by FtW 420 View Post

Haven't tried that board with a celly D, it's not bad for c2d at least, I'll have to try a celly in it.


Asus Commando is a good one for celery although I was just after the validation & wasn't playing with memory.
Quote:
Originally Posted by ivanlabrie View Post

I pm'd him and said the same thing...good p965 board is the best for that. But hard to find and pricey.
Do you know if the p5q-e has more ram dividers? There's one here for $55.

This is the best I could do with the Celeron D 356. Well actually I got it up to 4.55GHz but didn't save the validation.
http://valid.canardpc.com/show_oc.php?id=2690425

Anything higher and it doesn't post. The board I'm referring to is a Biostar TP35D2-A7

And according to a review I just read it looks like my RAM problem is because of the 533MHz BUS of the Celly. When I get the Q6600 I should be able to choose a mem freq.
post #11676 of 33410
Okay so I tried 1.55volts at 5ghz and it boots into windows to the loading screen then blacks out and then repeats that process but it doesnt power down... is voltage too high or too low and should I be asjusting my v droop? it only allows odd increments.


Edit: I've booted into windows fine at 4.8ghz @ 1.52volts... CPU Z is reporting 1.49votls being used.
Edited by DiamondCut - 2/13/13 at 5:51pm
post #11677 of 33410
Quote:
Originally Posted by stickg1 View Post


This is the best I could do with the Celeron D 356. Well actually I got it up to 4.55GHz but didn't save the validation.
http://valid.canardpc.com/show_oc.php?id=2690425

Anything higher and it doesn't post. The board I'm referring to is a Biostar TP35D2-A7

And according to a review I just read it looks like my RAM problem is because of the 533MHz BUS of the Celly. When I get the Q6600 I should be able to choose a mem freq.

Ah, thought you had the tpower i45...not a bad board anyway. thumb.gif
Go buy some D9 sticks and be done with it.
post #11678 of 33410
Quote:
Originally Posted by Djghost454 View Post

http://www.overclock.net/content/type/61/id/1290822/width/500/height/1000[/IMG] Warning: Spoiler! (Click to show)

[/SPOILER]

It's only 2 corners, turns out the blade I used was too flimsy and trying to get under the IHS bent it.

My cell phone camera sucks, but I hope this is salvageable.

looks like the end of the razor dug in good. that happend the first time i delided. this time i kept both ends of the razor blade off the pcb so it dosent dig in.
heres a pic of what i mean. both edges not over pcb

now here is a pic of what u dont want to do. end of blade over pcb


ok i no that the razor is all messed up and stuff but its good when it was brand new worked really good. but that is a dead chip so who cares
Daily Rig
(21 items)
 
Bench Setup
(19 items)
 
 
CPUMotherboardGraphicsRAM
5820k 4.7Ghz @ 1.28vcore / 1.88vccin Gigabyte x99 SOC Champion EVGA GTX 1080Ti G.SKILL Trident Z 32GB 3200Mhz CL14 
Hard DriveHard DriveHard DriveHard Drive
2x Intel 520 120Gb SSD in RAID 0  Intel 180Gb 530 SSD OS Drive 2Tb WD HDD  2x Intel 730 SSD 480GB in RAID 0 
CoolingCoolingCoolingCooling
2x HWLabs GTX360 Black Ice in Push Pull EK blocks for CPU / GPU's 6x corsair sp120 2350RPM 6x Ek Vardar 120 F4's 2200rpm  
OSMonitorKeyboardPower
windows 10 XB270HU 2560x1440 - 144Hz - G-sync Razor blackwidow cooler master V1000 
CaseMouseMouse PadAudio
Corsair 780T EVGA TORQ x10 evga mouse pad 2.1 audio / Hyper X cloud II / Sennheiser Gam... 
Other
EK pump / res 
CPUMotherboardGraphicsGraphics
6600k Z170M OC Formula GTX780Ti AMD HD6450 
RAMHard DriveHard DriveHard Drive
Trident Z 3600Mhz cl16 2x8GB 120Gb intel 520 120Gb intel 520 64Gb adata ssd  
Hard DriveOptical DriveCoolingCooling
750Gb WD Black Sony  F1 Gemini CPU Pot Tek - 9 Fat 
CoolingOSMonitorPower
custom loop two 240rad's xp,W7,W8,W10 x-star 2560x1440  Rosewill Quark-650 Platinum / Antec HCP-850 Pla... 
CaseMouseMouse Pad
Dimastech Mini V1.0 black razor abyssus Razor 
  hide details  
Reply
Daily Rig
(21 items)
 
Bench Setup
(19 items)
 
 
CPUMotherboardGraphicsRAM
5820k 4.7Ghz @ 1.28vcore / 1.88vccin Gigabyte x99 SOC Champion EVGA GTX 1080Ti G.SKILL Trident Z 32GB 3200Mhz CL14 
Hard DriveHard DriveHard DriveHard Drive
2x Intel 520 120Gb SSD in RAID 0  Intel 180Gb 530 SSD OS Drive 2Tb WD HDD  2x Intel 730 SSD 480GB in RAID 0 
CoolingCoolingCoolingCooling
2x HWLabs GTX360 Black Ice in Push Pull EK blocks for CPU / GPU's 6x corsair sp120 2350RPM 6x Ek Vardar 120 F4's 2200rpm  
OSMonitorKeyboardPower
windows 10 XB270HU 2560x1440 - 144Hz - G-sync Razor blackwidow cooler master V1000 
CaseMouseMouse PadAudio
Corsair 780T EVGA TORQ x10 evga mouse pad 2.1 audio / Hyper X cloud II / Sennheiser Gam... 
Other
EK pump / res 
CPUMotherboardGraphicsGraphics
6600k Z170M OC Formula GTX780Ti AMD HD6450 
RAMHard DriveHard DriveHard Drive
Trident Z 3600Mhz cl16 2x8GB 120Gb intel 520 120Gb intel 520 64Gb adata ssd  
Hard DriveOptical DriveCoolingCooling
750Gb WD Black Sony  F1 Gemini CPU Pot Tek - 9 Fat 
CoolingOSMonitorPower
custom loop two 240rad's xp,W7,W8,W10 x-star 2560x1440  Rosewill Quark-650 Platinum / Antec HCP-850 Pla... 
CaseMouseMouse Pad
Dimastech Mini V1.0 black razor abyssus Razor 
  hide details  
Reply
post #11679 of 33410
Thread Starter 
Quote:
Originally Posted by Djghost454 View Post





It's only 2 corners, turns out the blade I used was too flimsy and trying to get under the IHS bent it.

My cell phone camera sucks, but I hope this is salvageable.

those traces are waaaaay out there... you might be lucky and it looks like it should be decent... you never know. Just think possitively it looks decent to me, compared to some lol. thumb.gif
Quote:
Originally Posted by DiamondCut View Post

Okay so I tried 1.55volts at 5ghz and it boots into windows to the loading screen then blacks out and then repeats that process but it doesnt power down... is voltage too high or too low and should I be asjusting my v droop? it only allows odd increments.


Edit: I've booted into windows fine at 4.8ghz @ 1.52volts... CPU Z is reporting 1.49votls being used.

not enough vcore then.... your chip = poopy try 1.57-1.58 vcore
post #11680 of 33410
heres pics of my dead chip it was crap any way needed 1.35v for 4.5ghz biggrin.gif

Daily Rig
(21 items)
 
Bench Setup
(19 items)
 
 
CPUMotherboardGraphicsRAM
5820k 4.7Ghz @ 1.28vcore / 1.88vccin Gigabyte x99 SOC Champion EVGA GTX 1080Ti G.SKILL Trident Z 32GB 3200Mhz CL14 
Hard DriveHard DriveHard DriveHard Drive
2x Intel 520 120Gb SSD in RAID 0  Intel 180Gb 530 SSD OS Drive 2Tb WD HDD  2x Intel 730 SSD 480GB in RAID 0 
CoolingCoolingCoolingCooling
2x HWLabs GTX360 Black Ice in Push Pull EK blocks for CPU / GPU's 6x corsair sp120 2350RPM 6x Ek Vardar 120 F4's 2200rpm  
OSMonitorKeyboardPower
windows 10 XB270HU 2560x1440 - 144Hz - G-sync Razor blackwidow cooler master V1000 
CaseMouseMouse PadAudio
Corsair 780T EVGA TORQ x10 evga mouse pad 2.1 audio / Hyper X cloud II / Sennheiser Gam... 
Other
EK pump / res 
CPUMotherboardGraphicsGraphics
6600k Z170M OC Formula GTX780Ti AMD HD6450 
RAMHard DriveHard DriveHard Drive
Trident Z 3600Mhz cl16 2x8GB 120Gb intel 520 120Gb intel 520 64Gb adata ssd  
Hard DriveOptical DriveCoolingCooling
750Gb WD Black Sony  F1 Gemini CPU Pot Tek - 9 Fat 
CoolingOSMonitorPower
custom loop two 240rad's xp,W7,W8,W10 x-star 2560x1440  Rosewill Quark-650 Platinum / Antec HCP-850 Pla... 
CaseMouseMouse Pad
Dimastech Mini V1.0 black razor abyssus Razor 
  hide details  
Reply
Daily Rig
(21 items)
 
Bench Setup
(19 items)
 
 
CPUMotherboardGraphicsRAM
5820k 4.7Ghz @ 1.28vcore / 1.88vccin Gigabyte x99 SOC Champion EVGA GTX 1080Ti G.SKILL Trident Z 32GB 3200Mhz CL14 
Hard DriveHard DriveHard DriveHard Drive
2x Intel 520 120Gb SSD in RAID 0  Intel 180Gb 530 SSD OS Drive 2Tb WD HDD  2x Intel 730 SSD 480GB in RAID 0 
CoolingCoolingCoolingCooling
2x HWLabs GTX360 Black Ice in Push Pull EK blocks for CPU / GPU's 6x corsair sp120 2350RPM 6x Ek Vardar 120 F4's 2200rpm  
OSMonitorKeyboardPower
windows 10 XB270HU 2560x1440 - 144Hz - G-sync Razor blackwidow cooler master V1000 
CaseMouseMouse PadAudio
Corsair 780T EVGA TORQ x10 evga mouse pad 2.1 audio / Hyper X cloud II / Sennheiser Gam... 
Other
EK pump / res 
CPUMotherboardGraphicsGraphics
6600k Z170M OC Formula GTX780Ti AMD HD6450 
RAMHard DriveHard DriveHard Drive
Trident Z 3600Mhz cl16 2x8GB 120Gb intel 520 120Gb intel 520 64Gb adata ssd  
Hard DriveOptical DriveCoolingCooling
750Gb WD Black Sony  F1 Gemini CPU Pot Tek - 9 Fat 
CoolingOSMonitorPower
custom loop two 240rad's xp,W7,W8,W10 x-star 2560x1440  Rosewill Quark-650 Platinum / Antec HCP-850 Pla... 
CaseMouseMouse Pad
Dimastech Mini V1.0 black razor abyssus Razor 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide