Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 1174

post #11731 of 33557
Quote:
Originally Posted by JoeTesla View Post

Yeah.. talk about a wall.. lol

Yes I do have pll overvoltage enabled, I also set the pll at 1.9v.

I'm still figuring my way around the MSI bios interface.. but I think that's about it for what my chip can do.

Haven't even tried messing with the RAM beyond the 2400 XMP yet.

I wish I knew the MSI bios well. I have an asrock board. Can you not even boot in at 1.54v or is it just not stable enough?
post #11732 of 33557
Quote:
Originally Posted by chronicfx View Post

Really? All the way from 1.425 to 1.54 you can't get one multi? Do you have pll overvoltage enabled in your bios? I bet we can get u 5 if we work on it as a group tongue.gif
Quote:
Originally Posted by JoeTesla View Post

Yeah.. talk about a wall.. lol

Yes I do have pll overvoltage enabled, I also set the pll at 1.9v.

I'm still figuring my way around the MSI bios interface.. but I think that's about it for what my chip can do.

Haven't even tried messing with the RAM beyond the 2400 XMP yet.
Quote:
Originally Posted by chronicfx View Post

I wish I knew the MSI bios well. I have an asrock board. Can you not even boot in at 1.54v or is it just not stable enough?

some ivy's make a big jumps vcore wise with those higher oc's, 4.9-5.0 and 5.1ghz chronicfx
o, and dont go over 1.89 with pll, thats the max really(for air/water)..i would lower it again if i where you JoeTesla smile.gif
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
post #11733 of 33557
I probably can lower the PLL for 4.9.

Also, when I OC I usually do it within the OS at first (using the MSI App..)

I set voltage, set multiplier and run Cinebench. If that passes I run a longer stability test, and after that, apply the settings to the bios.

Usually, if the OC is bad, the Cinebench app will just crash so I don't have to reboot and start over...

When I tried 5ghz at 1.54v Cinebench didn't just crash, my machine completely froze and after a few seconds I got a blue screen..
I decided to stop there...
    
CPUMotherboardGraphicsRAM
i7 3770k msi z77 mpower GeForce 670 G.Skill TridentX 
Hard DriveCoolingCoolingCooling
Samsung 840 pro XSPC raystorm CPU block EK nickel-plexi 670 block black ice 280 
CoolingCoolingCoolingCooling
Alphacool ut60 360 radiator Swiftech MCP-35x pump Noiseblocker NB-Eloop PWM 800-2000 x3 Corsair SP120 x3 
CoolingCoolingOSKeyboard
BitFenix Spectre Pro White LED 140 x2 150x60 Tube Res Windows 8 Corsair K60 
PowerCaseMouse
Rosewill 650W Gold Corsair 500R Razer DeathAdder 3.5G 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 3770k msi z77 mpower GeForce 670 G.Skill TridentX 
Hard DriveCoolingCoolingCooling
Samsung 840 pro XSPC raystorm CPU block EK nickel-plexi 670 block black ice 280 
CoolingCoolingCoolingCooling
Alphacool ut60 360 radiator Swiftech MCP-35x pump Noiseblocker NB-Eloop PWM 800-2000 x3 Corsair SP120 x3 
CoolingCoolingOSKeyboard
BitFenix Spectre Pro White LED 140 x2 150x60 Tube Res Windows 8 Corsair K60 
PowerCaseMouse
Rosewill 650W Gold Corsair 500R Razer DeathAdder 3.5G 
  hide details  
Reply
post #11734 of 33557
Quote:
Originally Posted by VonDutch View Post

im using the same ram speed, with xmp profile, 1600 mhz, 9-9-9-24,
if its near what others have, i think its all good, when you oc 100mhz higher, and dont
get higher gflops cpmpared to the 100 mhz lower ones, then its a problem,
or maybe you could call it "phantom instability" ..lol
its not a exact science tho, i mean, when you run ibt and windows is checking on something in the background,
like updates, could give you a gflop less etc..i wouldnt worry to much about it smile.gif

Maybe I gave you flawed data.. I had my wife telling me to feed my son so I sort of ran that 5.0 IBT right off the boot before evrything was settled down. sorry for the rushed numbers. Did you think they were low or normal?
post #11735 of 33557
Quote:
Originally Posted by chronicfx View Post

Maybe I gave you flawed data.. I had my wife telling me to feed my son so I sort of ran that 5.0 IBT right off the boot before evrything was settled down. sorry for the rushed numbers. Did you think they were low or normal?

looked normal to me, but you could keep a eye on it next time, if your not in a rush,
but i think it wont make a very big difference tho..
kids first, then computer right ..lol wink.gif
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
post #11736 of 33557
Quote:
Originally Posted by JoeTesla View Post

I probably can lower the PLL for 4.9.

Also, when I OC I usually do it within the OS at first (using the MSI App..)

I set voltage, set multiplier and run Cinebench. If that passes I run a longer stability test, and after that, apply the settings to the bios.

Usually, if the OC is bad, the Cinebench app will just crash so I don't have to reboot and start over...

When I tried 5ghz at 1.54v Cinebench didn't just crash, my machine completely froze and after a few seconds I got a blue screen..
I decided to stop there...

if you really have your numbers gathered, i would use the bios to oc,
i think it works better then software most of the time..
are you running xmp proflie for your ram? i saw you mentioned somewhere you run it at 2400mhz?
did you up your voltage for ram?

and if you have time, can you fill in your sig, its easier for us to see what hardware you have,
instead of asking all the time ..lol smile.gif
Edited by VonDutch - 2/14/13 at 10:27am
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
post #11737 of 33557
Here is the link for getting your rig in your posts:
http://www.overclock.net/t/1258253/how-to-put-your-rig-in-your-sig
Ivy 5.0
(14 items)
 
Ivy 4.8
(15 items)
 
 
CPUMotherboardGraphicsRAM
i7-3770k 5.0 24/7 Maximus V Formula EVGA GTX 690 G.Skill Trident X 2400 (2x8gb) 
Hard DriveOptical DriveCoolingOS
Samsung 840 Pro 512GB Pioneer BD-RW Swiftech H220 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
2 x NEC 30" Logitech G15 Corsair AX1200 NZXT Switch 810 
MouseAudio
Logitech G9x Logitech G51 
  hide details  
Reply
Ivy 5.0
(14 items)
 
Ivy 4.8
(15 items)
 
 
CPUMotherboardGraphicsRAM
i7-3770k 5.0 24/7 Maximus V Formula EVGA GTX 690 G.Skill Trident X 2400 (2x8gb) 
Hard DriveOptical DriveCoolingOS
Samsung 840 Pro 512GB Pioneer BD-RW Swiftech H220 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
2 x NEC 30" Logitech G15 Corsair AX1200 NZXT Switch 810 
MouseAudio
Logitech G9x Logitech G51 
  hide details  
Reply
post #11738 of 33557
Yes, running XMP.
I just updated my build with the 'rigbuilder'..

The XMP profile increased the ram voltage to 1.65 when running at 2400, that's the correct specs for the tridentX.
I have:

i7-3770k
MSI mPower MB
2x4GB GSkill TridentX
gtx 670 reference
samsung 840 pro 128gb
seagate 2tb 7200RPM HD
650W 80+ 'Gold' Rosewill PSU
    
CPUMotherboardGraphicsRAM
i7 3770k msi z77 mpower GeForce 670 G.Skill TridentX 
Hard DriveCoolingCoolingCooling
Samsung 840 pro XSPC raystorm CPU block EK nickel-plexi 670 block black ice 280 
CoolingCoolingCoolingCooling
Alphacool ut60 360 radiator Swiftech MCP-35x pump Noiseblocker NB-Eloop PWM 800-2000 x3 Corsair SP120 x3 
CoolingCoolingOSKeyboard
BitFenix Spectre Pro White LED 140 x2 150x60 Tube Res Windows 8 Corsair K60 
PowerCaseMouse
Rosewill 650W Gold Corsair 500R Razer DeathAdder 3.5G 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 3770k msi z77 mpower GeForce 670 G.Skill TridentX 
Hard DriveCoolingCoolingCooling
Samsung 840 pro XSPC raystorm CPU block EK nickel-plexi 670 block black ice 280 
CoolingCoolingCoolingCooling
Alphacool ut60 360 radiator Swiftech MCP-35x pump Noiseblocker NB-Eloop PWM 800-2000 x3 Corsair SP120 x3 
CoolingCoolingOSKeyboard
BitFenix Spectre Pro White LED 140 x2 150x60 Tube Res Windows 8 Corsair K60 
PowerCaseMouse
Rosewill 650W Gold Corsair 500R Razer DeathAdder 3.5G 
  hide details  
Reply
post #11739 of 33557
Quote:
Originally Posted by JoeTesla View Post

Yes, running XMP.
I just updated my build with the 'rigbuilder'..

The XMP profile increased the ram voltage to 1.65 when running at 2400, that's the correct specs for the tridentX.
I have:

i7-3770k
MSI mPower MB
2x4GB GSkill TridentX
gtx 670 reference
samsung 840 pro 128gb
seagate 2tb 7200RPM HD
650W 80+ 'Gold' Rosewill PSU


some of my (especially the higher ones) oc's failed because i was using xmp profile,
maybe you can disable it for now, and just use the multi,
even use 1600mhz if you try to get the 5.0ghz running, see how it goes then,
nice rig btw smile.gif
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
post #11740 of 33557
Thanks smile.gif

I'll try toning down the ram and see how it goes
    
CPUMotherboardGraphicsRAM
i7 3770k msi z77 mpower GeForce 670 G.Skill TridentX 
Hard DriveCoolingCoolingCooling
Samsung 840 pro XSPC raystorm CPU block EK nickel-plexi 670 block black ice 280 
CoolingCoolingCoolingCooling
Alphacool ut60 360 radiator Swiftech MCP-35x pump Noiseblocker NB-Eloop PWM 800-2000 x3 Corsair SP120 x3 
CoolingCoolingOSKeyboard
BitFenix Spectre Pro White LED 140 x2 150x60 Tube Res Windows 8 Corsair K60 
PowerCaseMouse
Rosewill 650W Gold Corsair 500R Razer DeathAdder 3.5G 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 3770k msi z77 mpower GeForce 670 G.Skill TridentX 
Hard DriveCoolingCoolingCooling
Samsung 840 pro XSPC raystorm CPU block EK nickel-plexi 670 block black ice 280 
CoolingCoolingCoolingCooling
Alphacool ut60 360 radiator Swiftech MCP-35x pump Noiseblocker NB-Eloop PWM 800-2000 x3 Corsair SP120 x3 
CoolingCoolingOSKeyboard
BitFenix Spectre Pro White LED 140 x2 150x60 Tube Res Windows 8 Corsair K60 
PowerCaseMouse
Rosewill 650W Gold Corsair 500R Razer DeathAdder 3.5G 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide