Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 1370

post #13691 of 33682
Quote:
Originally Posted by VonDutch View Post

yea, or just put on a bit more on the die again if needed after you got the print on the inside ihs,
on the inside ihs ive used the print to know where to put the other layer,
its prolly not enough to use the print liquid only to cover the rectangle, have to try and see for yourselfs,
keep a eye on that the liquid pro doesnt "float" on the die, and youll be fine

Ok good, so I will make a thin layer on the die, then I will put on the ihs to have liquid printed on it and then I will apply a new layer there - on the inside ihs - either by using the print liquid if that would be enough, or by adding a new paste. Right ? I also assume that Q-tip supplied with paste is good to do the job.
post #13692 of 33682
Quote:
Originally Posted by PapaSmurf6768 View Post

My CLU just got here, hoping to join this club the next time I have to break down my loop. Can't wait for those higher OCs! biggrin.gif

Why wait?? biggrin.gif
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
post #13693 of 33682
Quote:
Originally Posted by Icydead View Post

Ok good, so I will make a thin layer on the die, then I will put on the ihs to have liquid printed on it and then I will apply a new layer there either by using the print liquid if that would be enough, or by adding a new paste. Right ? I also assume that Q-tip supplied with paste is good to do the job.

yep, you got it thumb.gif
and when you use the q-tip when you apply, use the same side/spot all the time, its easier to apply that way smile.gif
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
post #13694 of 33682
Quote:
Originally Posted by VonDutch View Post

yep, you got it thumb.gif
and when you use the q-tip when you apply, use the same side/spot all the time, its easier to apply that way smile.gif

Yea, Ive read that somewhere smile.gif Well now I should be ready thanks to your liquid 101 biggrin.gif Now to wait until it arrives.
post #13695 of 33682
Quote:
Originally Posted by VonDutch View Post

Why wait?? biggrin.gif

Don't tempt me!
Midnight Smurf
(17 items)
 
  
CPUMotherboardGraphicsGraphics
Intel 3570K MSI Z77A-GD65 ASUS GTX 670 ASUS GTX 670 
RAMHard DriveHard DriveCooling
G-Skill Ares 16GB OCZ Vertex 4 128GB WD Caviar Blue 500GB XSPC Raystorm 
CoolingCoolingCoolingOS
XSPC EX280 Radiator XSPC Dual Bay D5 Pump/Res Phobya Xtreme 200mm Radiator Windows 8 Pro 64bit 
KeyboardPowerCaseMouse
Razer Blackwidow Ultimate Corsair AX750 Corsair 650D Razer Deathadder 
Other
Carbon Fiber Vinyl 
  hide details  
Reply
Midnight Smurf
(17 items)
 
  
CPUMotherboardGraphicsGraphics
Intel 3570K MSI Z77A-GD65 ASUS GTX 670 ASUS GTX 670 
RAMHard DriveHard DriveCooling
G-Skill Ares 16GB OCZ Vertex 4 128GB WD Caviar Blue 500GB XSPC Raystorm 
CoolingCoolingCoolingOS
XSPC EX280 Radiator XSPC Dual Bay D5 Pump/Res Phobya Xtreme 200mm Radiator Windows 8 Pro 64bit 
KeyboardPowerCaseMouse
Razer Blackwidow Ultimate Corsair AX750 Corsair 650D Razer Deathadder 
Other
Carbon Fiber Vinyl 
  hide details  
Reply
post #13696 of 33682
Quote:
Originally Posted by invincible20xx View Post

don't stress yourself man, a cool stable 4.6GHz and call it a day lol biggrin.gif

and don't forget to game the crap out of it cause you have paid twice for this !

Haha thanks man there is so much talk on here about the infamous 5ghz OC that I sometimes forget that I still have a decent chip even though I can't hit that thumb.gif
post #13697 of 33682
Quote:
Originally Posted by RavageTheEarth View Post

Haha thanks man there is so much talk on here about the infamous 5ghz OC that I sometimes forget that I still have a decent chip even though I can't hit that thumb.gif

yup !

man i just successfully de-lidded the pentium 4 i told you about it just needed a little more work that i done using a thin but firm card board like thingy, guess i will do my 3770k now

break the corners using a blade then continue using my ultra thin firm cardboard guess this is it !!

the most fail proof way to go about this !
Zero Ex 2
(21 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 3770K De-Lidded w/CLU @ 4.6 GHz ASUS Z77 TUF Sabertooth 2x Asus GTX 1080 Strix 8GB @ 2100/11000 MHZ SLI 2x Kingston Hyper-X Beast 8GB DDR3 @ 2200 MHz 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 Pro 1TB SSD Western Digital 60EZRX 6TB 5400RPM HDD Samsung SH-S203N 20X LightScribe DVD RW Corsair H100i + 4x CM 120mm @ Push/Pull 
CoolingOSMonitorKeyboard
5x CM 120mm + 1x CM 230mm + 1x NZXT 140mm Windows 10 x64 Samsung UA50JS7200R 50'' 4K SUHD HDR Smart TV Gigabyte Aivia Osmium 
PowerCaseMouseMouse Pad
Seasonic X-Series Gold 850W Cooler Master HAF 932 Gigabyte Aivia Krypton CM Storm Speed-RX S 
AudioAudioAudioOther
Creative SB X-FI Titanium Fatality Pro Edifier S760D 5.1 Dolby Digital Sound System Corsair Vengeance 2100 Wireless 7.1 Gaming Headset Microsoft Xbox 360 Wireless Gamepad + Receiver 
Other
MSI Star PCI-E USB 3.0 Hub  
  hide details  
Reply
Zero Ex 2
(21 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 3770K De-Lidded w/CLU @ 4.6 GHz ASUS Z77 TUF Sabertooth 2x Asus GTX 1080 Strix 8GB @ 2100/11000 MHZ SLI 2x Kingston Hyper-X Beast 8GB DDR3 @ 2200 MHz 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 Pro 1TB SSD Western Digital 60EZRX 6TB 5400RPM HDD Samsung SH-S203N 20X LightScribe DVD RW Corsair H100i + 4x CM 120mm @ Push/Pull 
CoolingOSMonitorKeyboard
5x CM 120mm + 1x CM 230mm + 1x NZXT 140mm Windows 10 x64 Samsung UA50JS7200R 50'' 4K SUHD HDR Smart TV Gigabyte Aivia Osmium 
PowerCaseMouseMouse Pad
Seasonic X-Series Gold 850W Cooler Master HAF 932 Gigabyte Aivia Krypton CM Storm Speed-RX S 
AudioAudioAudioOther
Creative SB X-FI Titanium Fatality Pro Edifier S760D 5.1 Dolby Digital Sound System Corsair Vengeance 2100 Wireless 7.1 Gaming Headset Microsoft Xbox 360 Wireless Gamepad + Receiver 
Other
MSI Star PCI-E USB 3.0 Hub  
  hide details  
Reply
post #13698 of 33682
Quote:
Originally Posted by invincible20xx View Post

yup !

man i just successfully de-lidded the pentium 4 i told you about it just needed a little more work that i done using a thin but firm card board like thingy, guess i will do my 3770k now

break the corners using a blade then continue using my ultra thin firm cardboard guess this is it !!

the most fail proof way to go about this !

Good job! Let us know how it goes! Good luck!!!!!!!!
post #13699 of 33682
Quote:
Originally Posted by PapaSmurf6768 View Post

Don't tempt me!

Well its too late!! Your tempted!

Btw my CLU should be here when I get home. I aready have my chip all taken apart and cleaned all it needs is the CLU on it!
post #13700 of 33682
Quote:
Originally Posted by RavageTheEarth View Post

My chip doesn't boot with 5ghz at 1.5v so I guess I'm never going to get that 5ghz OC :-( :-( :-(
did u enable pll overvoltage?
Daily Rig
(21 items)
 
Bench Setup
(19 items)
 
 
CPUMotherboardGraphicsRAM
5820k 4.7Ghz @ 1.28vcore / 1.88vccin Gigabyte x99 SOC Champion EVGA GTX 1080Ti G.SKILL Trident Z 32GB 3200Mhz CL14 
Hard DriveHard DriveHard DriveHard Drive
2x Intel 520 120Gb SSD in RAID 0  Intel 180Gb 530 SSD OS Drive 2Tb WD HDD  2x Intel 730 SSD 480GB in RAID 0 
CoolingCoolingCoolingCooling
2x HWLabs GTX360 Black Ice in Push Pull EK blocks for CPU / GPU's 6x corsair sp120 2350RPM 6x Ek Vardar 120 F4's 2200rpm  
OSMonitorKeyboardPower
windows 10 XB270HU 2560x1440 - 144Hz - G-sync Razor blackwidow cooler master V1000 
CaseMouseMouse PadAudio
Corsair 780T EVGA TORQ x10 evga mouse pad 2.1 audio / Hyper X cloud II / Sennheiser Gam... 
Other
EK pump / res 
CPUMotherboardGraphicsGraphics
6600k Z170M OC Formula GTX780Ti AMD HD6450 
RAMHard DriveHard DriveHard Drive
Trident Z 3600Mhz cl16 2x8GB 120Gb intel 520 120Gb intel 520 64Gb adata ssd  
Hard DriveOptical DriveCoolingCooling
750Gb WD Black Sony  F1 Gemini CPU Pot Tek - 9 Fat 
CoolingOSMonitorPower
custom loop two 240rad's xp,W7,W8,W10 x-star 2560x1440  Rosewill Quark-650 Platinum / Antec HCP-850 Pla... 
CaseMouseMouse Pad
Dimastech Mini V1.0 black razor abyssus Razor 
  hide details  
Reply
Daily Rig
(21 items)
 
Bench Setup
(19 items)
 
 
CPUMotherboardGraphicsRAM
5820k 4.7Ghz @ 1.28vcore / 1.88vccin Gigabyte x99 SOC Champion EVGA GTX 1080Ti G.SKILL Trident Z 32GB 3200Mhz CL14 
Hard DriveHard DriveHard DriveHard Drive
2x Intel 520 120Gb SSD in RAID 0  Intel 180Gb 530 SSD OS Drive 2Tb WD HDD  2x Intel 730 SSD 480GB in RAID 0 
CoolingCoolingCoolingCooling
2x HWLabs GTX360 Black Ice in Push Pull EK blocks for CPU / GPU's 6x corsair sp120 2350RPM 6x Ek Vardar 120 F4's 2200rpm  
OSMonitorKeyboardPower
windows 10 XB270HU 2560x1440 - 144Hz - G-sync Razor blackwidow cooler master V1000 
CaseMouseMouse PadAudio
Corsair 780T EVGA TORQ x10 evga mouse pad 2.1 audio / Hyper X cloud II / Sennheiser Gam... 
Other
EK pump / res 
CPUMotherboardGraphicsGraphics
6600k Z170M OC Formula GTX780Ti AMD HD6450 
RAMHard DriveHard DriveHard Drive
Trident Z 3600Mhz cl16 2x8GB 120Gb intel 520 120Gb intel 520 64Gb adata ssd  
Hard DriveOptical DriveCoolingCooling
750Gb WD Black Sony  F1 Gemini CPU Pot Tek - 9 Fat 
CoolingOSMonitorPower
custom loop two 240rad's xp,W7,W8,W10 x-star 2560x1440  Rosewill Quark-650 Platinum / Antec HCP-850 Pla... 
CaseMouseMouse Pad
Dimastech Mini V1.0 black razor abyssus Razor 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide