Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 1424

post #14231 of 33655
Quote:
Originally Posted by [CyGnus] View Post

Something is wrong there i have a antec 620 (akasa viper fan @ 1300 rpm) and my 3570k @ 4.7GHz 1.26v IBT does not go above 54ºc so i would say 4.5 and 68ºc is not good at all

Sorry, but I can't really do anything more.
I had 92c before de-lidding.
Heard the same story over and over again - I then sent it into for RMA, Scan UK came back saying the temps were fine.
Then I contacted Antec, and told them my temps, on stock 3.5ghz were 70c - and they came back telling me that was normal for a liquid cooler.
I can't really do or say much more.

My fitting is also correct - you may see a video I created in the antec 920 club (in my sig).

Long story short:
I can't do anything about those temps - more so other people have also reported similar high-temperatures from their antec 920 units. Another user was hitting 70c+ on stock, and another 85c+ on 4.5ghz.

I wish I had even better temps - but that's why I de-lidded.
68c on full load, is the lowest/highest I've ever seen my CPU on load be.
In other words, I'm happy with 68c MAX temperatures on 100% load whilst folding.

PS. IBT is a RUBBISH test for temps.
Sure for 50 gflops you might get a better indication, but IBT for me is only for short-term stress testing.
Temps CANNOT be determined by IBT alone.
I do understand Val's logic in putting IBT in order to test people's temps post and pre de-lidding, as that's the easiest, and fastest way - but as some people on here might know - including justanoldman - IBT temperatures should be taken with a pinch of salt.
Prime 95 for 24 hrs and/or fold for over 8hrs - THEN you'll know your actual MAX temperatures.
I got print screens as proof showing the huge difference and inconsistency of IBT temperatures.
Edited by Totally Dubbed - 3/18/13 at 5:53am
post #14232 of 33655
Quote:
Originally Posted by Totally Dubbed View Post

Sorry, but I can't really do anything more.
I had 92c before de-lidding.
Heard the same story over and over again - I then sent it into for RMA, Scan UK came back saying the temps were fine.
Then I contacted Antec, and told them my temps, on stock 3.5ghz were 70c - and they came back telling me that was normal for a liquid cooler.
I can't really do or say much more.

My fitting is also correct - you may see a video I created in the antec 920 club (in my sig).

Long story short:
I can't do anything about those temps - more so other people have also reported similar high-temperatures from their antec 920 units. Another user was hitting 70c+ on stock, and another 85c+ on 4.5ghz.

I wish I had even better temps - but that's why I de-lidded.
68c on full load, is the lowest/highest I've ever seen my CPU on load be.
In other words, I'm happy with 68c MAX temperatures on 100% load whilst folding.

PS. IBT is a RUBBISH test for temps.
Sure for 50 gflops you might get a better indication, but IBT for me is only for short-term stress testing.
Temps CANNOT be determined by IBT alone.
I do understand Val's logic in putting IBT in order to test people's temps post and pre de-lidding, as that's the easiest, and fastest way - but as some people on here might know - including justanoldman - IBT temperatures should be taken with a pinch of salt.
Prime 95 for 24 hrs and/or fold for over 8hrs - THEN you'll know your actual MAX temperatures.
I got print screens as proof showing the huge difference and inconsistency of IBT temperatures.

Wayne Rooney runs a Kuhler 920. He has a 3770K @ 9GHz with max temp of 37C. The chip wants to get hotter but it just respects him too much. Maybe if you score a couple more goals per year your chip would comply.
post #14233 of 33655
Quote:
Originally Posted by stickg1 View Post

Wayne Rooney runs a Kuhler 920. He has a 3770K @ 9GHz with max temp of 37C. The chip wants to get hotter but it just respects him too much. Maybe if you score a couple more goals per year your chip would comply.

that's on idle right?
9HGZ? hahaha BEAST tongue.gif

As for football - here's my victories in Fifa 13 - I've gone for a French sided team:
Check the goal out at 5:20 biggrin.gif
post #14234 of 33655
Well i mentioned IBT as reference cause it runs hotter then Prime 95 i only ran mine about 12h and max temp was 51ºc folding its 48ºc. I dont believe my cpu is special and runs -15ºc cooler but if you say everything is ok idont know what is going on. Is it well mounted / seated the amount of CLP/U
correct?
I had to re-seat the IHS 3 times because i had too much CLP on it and the temps were just awful but when i applied a tiny bit almost none on the die the temps decreased -10ºc easy.
Make sure everything is spot on i find those 68ºc a little high. Try to LAP the block and the IHS. Explore all options
post #14235 of 33655
Quote:
Originally Posted by [CyGnus] View Post

Well i mentioned IBT as reference cause it runs hotter then Prime 95 i only ran mine about 12h and max temp was 51ºc folding its 48ºc. I dont believe my cpu is special and runs -15ºc cooler but if you say everything is ok idont know what is going on. Is it well mounted / seated the amount of CLP/U
correct?
I had to re-seat the IHS 3 times because i had too much CLP on it and the temps were just awful but when i applied a tiny bit almost none on the die the temps decreased -10ºc easy.
Make sure everything is spot on i find those 68ºc a little high. Try to LAP the block and the IHS. Explore all options

What hes saying is he thinks he has a faulty Kuhler, but the retailer and the manufacturer are telling him it's fine so there's nothing he can do about it, unless he wants to throw it away and get something else.
post #14236 of 33655
Quote:
Originally Posted by [CyGnus] View Post

Well i mentioned IBT as reference cause it runs hotter then Prime 95 i only ran mine about 12h and max temp was 51ºc folding its 48ºc. I dont believe my cpu is special and runs -15ºc cooler but if you say everything is ok idont know what is going on. Is it well mounted / seated the amount of CLP/U
correct?
I had to re-seat the IHS 3 times because i had too much CLP on it and the temps were just awful but when i applied a tiny bit almost none on the die the temps decreased -10ºc easy.
Make sure everything is spot on i find those 68ºc a little high. Try to LAP the block and the IHS. Explore all options

Quote:
Originally Posted by stickg1 View Post

What hes saying is he thinks he has a faulty Kuhler, but the retailer and the manufacturer are telling him it's fine so there's nothing he can do about it, unless he wants to throw it away and get something else.

this smile.gif

And yes - I have done everything - incl experimenting with CLU amount, paste form (X method etc), mounting pressure, and fan direction.
I won't lap the IHS.
post #14237 of 33655
Quote:
Originally Posted by Totally Dubbed View Post


this smile.gif

And yes - I have done everything - incl experimenting with CLU amount, paste form (X method etc), mounting pressure, and fan direction.
I won't lap the IHS.

Have you looked at the video on how the CLU/CLP is supposed to be applied?
Gaming Rig
(14 items)
 
  
CPUMotherboardGraphicsRAM
I5-6600K @ 4.7GHz MSI Z170A Gaming Pro Carbon ASUS Radeon R9 390 (1200/1650) 2x4GB 2666MHz 
Hard DriveCoolingOSMonitor
Samsung 830 128GB Phobya Custom Water Windows 10 QNIX QX2710 @ 120Hz 
KeyboardPowerCaseMouse
QPAD MK-50, Blue Switches Rosewill TACHYON 650W Xigmatek Elysium G400 
Mouse PadAudio
MSI Gaming Xonar U7 + AKG Q701 
  hide details  
Reply
Gaming Rig
(14 items)
 
  
CPUMotherboardGraphicsRAM
I5-6600K @ 4.7GHz MSI Z170A Gaming Pro Carbon ASUS Radeon R9 390 (1200/1650) 2x4GB 2666MHz 
Hard DriveCoolingOSMonitor
Samsung 830 128GB Phobya Custom Water Windows 10 QNIX QX2710 @ 120Hz 
KeyboardPowerCaseMouse
QPAD MK-50, Blue Switches Rosewill TACHYON 650W Xigmatek Elysium G400 
Mouse PadAudio
MSI Gaming Xonar U7 + AKG Q701 
  hide details  
Reply
post #14238 of 33655
Quote:
Originally Posted by Totally Dubbed View Post

that's on idle right?
9HGZ? hahaha BEAST tongue.gif

As for football - here's my victories in Fifa 13 - I've gone for a French sided team:
Check the goal out at 5:20 biggrin.gif

Nope 37C full load.

You play on XBOX? I play too, I got FIFA13 on PC. I played the last couple of FIFAs on PS3 but thought it would be cool on PC. It's nice, plus it was only $30 instead of $60 so that's good too. Can people on PC play people on XBOX? If so we should have a game!
post #14239 of 33655
Quote:
Originally Posted by Stige View Post

Have you looked at the video on how the CLU/CLP is supposed to be applied?

I'm guessing he did because he explains how to apply it in his video on the first page of this thread thumb.gif I wonder if there is something up with quality control on those antecs. Have you ever tried another cooler on the CPU? I do think that something is wrong, but I totally believe you that you have tried everything.
post #14240 of 33655
Quote:
Originally Posted by Stige View Post

Couldn't get enough pressure on the CPU with just the block to go for direct-to-die install frown.gif

What I did with my Supremacy was order a replacement mounting kit, Then I bent the arms up on the original one and put the replacement in the box for when I decide to swap blocks.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide