Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 1465

post #14641 of 33576
Quote:
Originally Posted by RavageTheEarth View Post

Guys what do you think about the CORSAIR Hydro Series H90 Water Cooler? I'm thinking of getting a decent WC with my MOBO, but I would only have like $120 to spend on it at the most. Would I be dissapointmed coming from a Noctua NH-D14? I was also looking at the Thermaltake CLW0217 Water 2.0 Extreme/All-In-One Liquid Cooling System and the CORSAIR Hydro Series H100i Water Cooler too. I guess I could just buy the H100i and see how it performs and if I don't like it I could just get a refund. I just want to free up space around my CPU. I love my Noctua, it's just that it gets in the way of my RAM and it just covers a lot of the motherboard and on the MVE it is going to sit extremely close to my 7950.

Quote:
Originally Posted by RavageTheEarth View Post

I think I might actually go with the H100i. It looks like a good start for me to jump into the game without blowing too much money.

Quote:
Originally Posted by RavageTheEarth View Post

Nice!! I'm definetly going to let everyone know what I think of it and you should do the same. I'd like to compare temps. So I ordered the ASUS MVE and the H100i and next week I'm going to order my Phantom 820 in Gun Metal Grey and I should be all set!

What's with you peeps and the H100i??? thumbsdownsmileyanim.gif H220 would have been much better in the long run (if you intented to do a full loop)

Ok, imc is not too bad. 4x2gb 2400mhz cl9-11-9-28-1t relatively decent subs...I'm gonna go for max mhz with single stick now.
Cpu cores are kinda faggish, they need a lot of juice for 4.5ghz, but still stay relatively cool without delidding (which is odd, and kinda sucks)
post #14642 of 33576
Hello All,

I DE-Lidded my 3770K last night and it was pretty easy, I just took my time and followed the guides posted here. No scratches or bends to the PCB or CPU die.

I used CL Pro, that stuff is kinda hard to work with but I got a pretty good temp drop at full load. biggrin.gif ~10 deg.

I'll post some screen shots a little later.

Thanks again for the info! thumb.gif



-Jason
Edited by Jsunn - 3/22/13 at 9:29am
Cerberus
(18 items)
 
Glass Prism
(8 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 7700K Asus Maximus IX Code nVidia 1080Ti FE G.SKILL 16GB (2 x 8GB) TridentZ Series DDR4 PC4... 
Hard DriveHard DriveCoolingCooling
Samsung 1TB Evo 850 PRO Western Digital HDD EK Supremacy EVO EK 1080Ti FE Nickel Plexi waterblock 
CoolingCoolingCoolingCooling
EK Coolstream PE 360 Radiator  EK Coolstream PE 360 Radiator  EK Coolstream SE 360 Radiator EK-XRES 140 Revo D5 PWM (incl.pump) - Glass 
OSMonitorKeyboardPower
Microsoft Windows 10 64 bit  ROG Swift PG278Q Gaming Monitor Logitech g910+ Corsair RM850i 
CaseMouse
Lian Li PC-011 WGX ROG Edition Logitech G700 
CPUMotherboardGraphicsRAM
i7 7700k ASUS ROG Maximus IX Code NVidia GTX 1080Ti Founders Edition G. Skill TridentZ 
Hard DriveCoolingOSCase
Samsung 850 Pro EK-Kit X360 Windows 10 Pro Lian-Li PC-O11 
  hide details  
Reply
Cerberus
(18 items)
 
Glass Prism
(8 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 7700K Asus Maximus IX Code nVidia 1080Ti FE G.SKILL 16GB (2 x 8GB) TridentZ Series DDR4 PC4... 
Hard DriveHard DriveCoolingCooling
Samsung 1TB Evo 850 PRO Western Digital HDD EK Supremacy EVO EK 1080Ti FE Nickel Plexi waterblock 
CoolingCoolingCoolingCooling
EK Coolstream PE 360 Radiator  EK Coolstream PE 360 Radiator  EK Coolstream SE 360 Radiator EK-XRES 140 Revo D5 PWM (incl.pump) - Glass 
OSMonitorKeyboardPower
Microsoft Windows 10 64 bit  ROG Swift PG278Q Gaming Monitor Logitech g910+ Corsair RM850i 
CaseMouse
Lian Li PC-011 WGX ROG Edition Logitech G700 
CPUMotherboardGraphicsRAM
i7 7700k ASUS ROG Maximus IX Code NVidia GTX 1080Ti Founders Edition G. Skill TridentZ 
Hard DriveCoolingOSCase
Samsung 850 Pro EK-Kit X360 Windows 10 Pro Lian-Li PC-O11 
  hide details  
Reply
post #14643 of 33576
Quote:
Originally Posted by Jsunn View Post

Hello All,

I DE-Lidded my 3770K last night and it was pretty easy, I just took my time and followed the guides posted here. No scratches or bends to the PCB or CPU die.

I used CL Pro, that stuff is kinda hard to work with but I got a pretty good temp drop at full load. biggrin.gif ~10 deg.

I'll post some screen shots a little later.

Thanks again for the info! thumb.gif



-Jason

Good job! Did you go back with the IHS or keep it lidless?
post #14644 of 33576
Quote:
Originally Posted by Jsunn View Post

Hello All,

I DE-Lidded my 3770K last night and it was pretty easy, I just took my time and followed the guides posted here. No scratches or bends to the PCB or CPU die.

I used CL Pro, that stuff is kinda hard to work with but I got a pretty good temp drop at full load. biggrin.gif ~10 deg.

I'll post some screen shots a little later.

Thanks again for the info! thumb.gif



-Jason

Very nice! Congrats man biggrin.gif

Well, imc keeps going up...just got 5.2 points for my 2600mhz submission lol
Shooting for 3ghz nao!
post #14645 of 33576
Quote:
Originally Posted by Jsunn View Post

Hello All,

I DE-Lidded my 3770K last night and it was pretty easy, I just took my time and followed the guides posted here. No scratches or bends to the PCB or CPU die.

I used CL Pro, that stuff is kinda hard to work with but I got a pretty good temp drop at full load. biggrin.gif ~10 deg.

I'll post some screen shots a little later.

Thanks again for the info! thumb.gif



-Jason

Congrats man! Looks like you did a nice clean job. I used liquid ultra liquid ultra because it is a lot easier to spread and make a nice clean finish. Also beware if you put it on top of the IHS where the heatsink is because it tends to bond with some metals
post #14646 of 33576
Quote:
Originally Posted by ivanlabrie View Post



What's with you peeps and the H100i??? thumbsdownsmileyanim.gif H220 would have been much better in the long run (if you intented to do a full loop)

Ok, imc is not too bad. 4x2gb 2400mhz cl9-11-9-28-1t relatively decent subs...I'm gonna go for max mhz with single stick now.
Cpu cores are kinda faggish, they need a lot of juice for 4.5ghz, but still stay relatively cool without delidding (which is odd, and kinda sucks)

Don't hate man. And did you really just use the word "faggish"? Id refrain from using that type of language as to not offend everyone. Also, when I go to a full water loop in a year or so I'm going to replace it with something better and just sell it. I just wanted something that was cheap, good, and simple until then. So I think this will do the job just fine.
post #14647 of 33576
Quote:
Originally Posted by RavageTheEarth View Post

Don't hate man. And did you really just use the word "faggish"? Id refrain from using that type of language as to not offend everyone. Also, when I go to a full water loop in a year or so I'm going to replace it with something better and just sell it. I just wanted something that was cheap, good, and simple until then. So I think this will do the job just fine.

Just fooling around with y'all, no offense intended...It's just that I fail to see the value of an h100i when you have a D14 already. If I were you I would have gone straight to the h220 or kept the d14, which performs on par with an h100i anyway. thumb.gif
post #14648 of 33576
I was just wondering, could you guys on water and CLP/CLU let me know what your temps are at with 1.4-1.45v. Thanks in advance.
post #14649 of 33576
Quote:
Originally Posted by ivanlabrie View Post

Just fooling around with y'all, no offense intended...It's just that I fail to see the value of an h100i when you have a D14 already. If I were you I would have gone straight to the h220 or kept the d14, which performs on par with an h100i anyway. thumb.gif

Yea I wasn't trying start anything with you I just know your a good guy and I didn't want anyone to get mad at you. The main reason I wanted to get the h100I was for SPACE so I could see the beautiful mobo through the case window and have the option to upgrade RAM without modding anything. I want something that performs the same or better than my Noctua so I think I made the right choice for the time being.
Edited by RavageTheEarth - 3/22/13 at 11:03am
post #14650 of 33576
yea i will be selling my h100 soon and gettting the H220
Daily Rig
(21 items)
 
Bench Setup
(19 items)
 
 
CPUMotherboardGraphicsRAM
5820k 4.7Ghz @ 1.28vcore / 1.88vccin Gigabyte x99 SOC Champion EVGA GTX 1080Ti G.SKILL Trident Z 32GB 3200Mhz CL14 
Hard DriveHard DriveHard DriveHard Drive
2x Intel 520 120Gb SSD in RAID 0  Intel 180Gb 530 SSD OS Drive 2Tb WD HDD  2x Intel 730 SSD 480GB in RAID 0 
CoolingCoolingCoolingCooling
2x HWLabs GTX360 Black Ice in Push Pull EK blocks for CPU / GPU's 6x corsair sp120 2350RPM 6x Ek Vardar 120 F4's 2200rpm  
OSMonitorKeyboardPower
windows 10 XB270HU 2560x1440 - 144Hz - G-sync Razor blackwidow cooler master V1000 
CaseMouseMouse PadAudio
Corsair 780T EVGA TORQ x10 evga mouse pad 2.1 audio / Hyper X cloud II / Sennheiser Gam... 
Other
EK pump / res 
CPUMotherboardGraphicsGraphics
6600k Z170M OC Formula GTX780Ti AMD HD6450 
RAMHard DriveHard DriveHard Drive
Trident Z 3600Mhz cl16 2x8GB 120Gb intel 520 120Gb intel 520 64Gb adata ssd  
Hard DriveOptical DriveCoolingCooling
750Gb WD Black Sony  F1 Gemini CPU Pot Tek - 9 Fat 
CoolingOSMonitorPower
custom loop two 240rad's xp,W7,W8,W10 x-star 2560x1440  Rosewill Quark-650 Platinum / Antec HCP-850 Pla... 
CaseMouseMouse Pad
Dimastech Mini V1.0 black razor abyssus Razor 
  hide details  
Reply
Daily Rig
(21 items)
 
Bench Setup
(19 items)
 
 
CPUMotherboardGraphicsRAM
5820k 4.7Ghz @ 1.28vcore / 1.88vccin Gigabyte x99 SOC Champion EVGA GTX 1080Ti G.SKILL Trident Z 32GB 3200Mhz CL14 
Hard DriveHard DriveHard DriveHard Drive
2x Intel 520 120Gb SSD in RAID 0  Intel 180Gb 530 SSD OS Drive 2Tb WD HDD  2x Intel 730 SSD 480GB in RAID 0 
CoolingCoolingCoolingCooling
2x HWLabs GTX360 Black Ice in Push Pull EK blocks for CPU / GPU's 6x corsair sp120 2350RPM 6x Ek Vardar 120 F4's 2200rpm  
OSMonitorKeyboardPower
windows 10 XB270HU 2560x1440 - 144Hz - G-sync Razor blackwidow cooler master V1000 
CaseMouseMouse PadAudio
Corsair 780T EVGA TORQ x10 evga mouse pad 2.1 audio / Hyper X cloud II / Sennheiser Gam... 
Other
EK pump / res 
CPUMotherboardGraphicsGraphics
6600k Z170M OC Formula GTX780Ti AMD HD6450 
RAMHard DriveHard DriveHard Drive
Trident Z 3600Mhz cl16 2x8GB 120Gb intel 520 120Gb intel 520 64Gb adata ssd  
Hard DriveOptical DriveCoolingCooling
750Gb WD Black Sony  F1 Gemini CPU Pot Tek - 9 Fat 
CoolingOSMonitorPower
custom loop two 240rad's xp,W7,W8,W10 x-star 2560x1440  Rosewill Quark-650 Platinum / Antec HCP-850 Pla... 
CaseMouseMouse Pad
Dimastech Mini V1.0 black razor abyssus Razor 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide