Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 1487

post #14861 of 34072
Quote:
Originally Posted by RavageTheEarth View Post

Ok thanks! Can anyone reccomend some fans that would be better than the stock corsairs? Noise doesn't really bother me because I use headphones.

Quote:
Originally Posted by RavageTheEarth View Post

Yea I heard delta's push A LOT of air. In the Phantom 820 that is on it's way I'm thinking of putting two 200mm fans on the top and then hanging the rad for my H100i from the L-Hook that is supplied with the case so I can have a push/pull setup. Do you think I should just stick three deltas on the top and then two on the rad for a crazy push/pull set-up?

Get 120x38 Nidec Beta V ta450dc 5300rpm fans for ebay, 9usd each. 220cfm and massive pressure, you can control them with a proper pwm controller, if you need less noise for some reason.
Do a push only setup with those set as exhaust and you'll be golden.
Quote:
Originally Posted by FtW 420 View Post

I still have mine too, in-club 8400gs bench off!

I was a heavy drinker through my teen years, & spent some time having a fondness for freebasing. There were a few incidents that made me realize I had to change things & I did. I kept the 420 & quit the rest of it over 20 years ago.

It's ON!!!!
Now, to find a way to boot at 5ghz...or do you wanna go for 4ghz cpu efficiency with maxed gpu?
Ram I can go up to 2600mhz, so no concerns there.
Quote:
Originally Posted by Xinoxide View Post

I had quit everything and kept the 420, Now I have a son! Fatherhood is a very good... thing.

I cannot words. But I don't do anything but overclock now.

Itried to play some games, ended up bumping my multi and trying to stabilize instead.

( While the little guy was napping )

Yeah, I love benching and overclocking stuff biggrin.gif
I do like gaming, but only mmo's these days, cause I get to play with my gf or friends.
post #14862 of 34072
I took the leap a week or so ago and delidded, only got around to putting some liquid pro on it this weekend..

My temps atm are 20-25c idle and 60-70c on load @ 1.450 vcore/5Ghz (3570k)

Wondering though, are those temps a little high for a xspc raystorm/ two 240mm rads and a d5 pump??

I'm thinking about re-applying the liquid pro but I want to be sure before I go through the effort of removing all the gear.

Cheers!
Renegard - H20
(13 items)
 
  
CPUMotherboardGraphicsRAM
2500K @ 5Ghz ASUS P67 Sabertooth Gigabyte 4890 @ 1000mhz/4000mhz 2x2GB G.Skill PI 1600 
Hard DriveOSMonitorKeyboard
WD 320gb 32mb cache Windows 7 64Bit BenQ 22" Widescreen Logitech G15 V2 
PowerCaseMouse
Superflower 650watt HAF 932 Logitech G5 
  hide details  
Reply
Renegard - H20
(13 items)
 
  
CPUMotherboardGraphicsRAM
2500K @ 5Ghz ASUS P67 Sabertooth Gigabyte 4890 @ 1000mhz/4000mhz 2x2GB G.Skill PI 1600 
Hard DriveOSMonitorKeyboard
WD 320gb 32mb cache Windows 7 64Bit BenQ 22" Widescreen Logitech G15 V2 
PowerCaseMouse
Superflower 650watt HAF 932 Logitech G5 
  hide details  
Reply
post #14863 of 34072
Quote:
Originally Posted by ivanlabrie View Post


Get 120x38 Nidec Beta V ta450dc 5300rpm fans for ebay, 9usd each. 220cfm and massive pressure, you can control them with a proper pwm controller, if you need less noise for some reason.
Do a push only setup with those set as exhaust and you'll be golden.

Why can I only get them on ebay? jw
post #14864 of 34072
Temps look rather high to me...I'd re apply. thumb.gif
post #14865 of 34072
Quote:
Originally Posted by RavageTheEarth View Post

Why can I only get them on ebay? jw

Cause that's the cheapest place, they come from Israel. 9usd each, plus 6usd shipping.
http://www.ebay.com/itm/Fans-12VDC-120x120x38MM-5300-RPM-Nidec-VA450DC-V34809-35-New-/360472319351?pt=LH_DefaultDomain_0&hash=item53edd31577

I wouldn't reccomend getting ball bearing fans really, cause the bearing can get damaged on its way to you. One of my 5300rpm fans is silent at 1600rpm, but the other one makes a distinct bearing noise. Nothing too terrible, but not silent.
I'd go with Gelid Silent 12 fans in push/pull for better efficiency and good price.
Ebay also has them cheaper than anywhere else, those fans rival Gentle Typhoons spec wise, and noise wise they can be quieter at certain rpm.
post #14866 of 34072
Quote:
Originally Posted by ivanlabrie View Post


Get 120x38 Nidec Beta V ta450dc 5300rpm fans for ebay, 9usd each. 220cfm and massive pressure, you can control them with a proper pwm controller, if you need less noise for some reason.
Do a push only setup with those set as exhaust and you'll be golden.
It's ON!!!!
Now, to find a way to boot at 5ghz...or do you wanna go for 4ghz cpu efficiency with maxed gpu?
Ram I can go up to 2600mhz, so no concerns there.
Yeah, I love benching and overclocking stuff biggrin.gif
I do like gaming, but only mmo's these days, cause I get to play with my gf or friends.

With the little cards cpu speed becomes much less of a factor, there probably wouldn't be much difference between 4Ghz & 5Ghz cpu anyway, low clock will be fine.
Playing on a 3930k right now but have to get the 1155 rig back up soon, need to work on memory clock for the pro cup, gotta make sure OCN stays out of last place at least!
    
CPUMotherboardGraphicsRAM
i7 990x/3930k/3770k/4770k GB x58a-OC/Asus RIVE/x79 gd65/z77 mpower/z77 MV... gtx480s/gtx580s/7970s/680s/Titan Hyper/PSC/BBSE/Hynix/Samsung 
Hard DriveOptical DriveCoolingOS
HDDs/SSDs DVD Air/water/phase/copper pot Windowz 
MonitorKeyboardPowerCase
samsung 2320 Razer Lycosa ax1200 carboard box 
Mouse
Trackball 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 990x/3930k/3770k/4770k GB x58a-OC/Asus RIVE/x79 gd65/z77 mpower/z77 MV... gtx480s/gtx580s/7970s/680s/Titan Hyper/PSC/BBSE/Hynix/Samsung 
Hard DriveOptical DriveCoolingOS
HDDs/SSDs DVD Air/water/phase/copper pot Windowz 
MonitorKeyboardPowerCase
samsung 2320 Razer Lycosa ax1200 carboard box 
Mouse
Trackball 
  hide details  
Reply
post #14867 of 34072
Quote:
Originally Posted by FtW 420 View Post

With the little cards cpu speed becomes much less of a factor, there probably wouldn't be much difference between 4Ghz & 5Ghz cpu anyway, low clock will be fine.
Playing on a 3930k right now but have to get the 1155 rig back up soon, need to work on memory clock for the pro cup, gotta make sure OCN stays out of last place at least!

But, older card...dx9 only. Those benchies eat cpu clocks like there's no tomorrow.
I'm gonna be beat with my current max oc of 4.2ghz cpu. WORST cpu ever!
post #14868 of 34072
So I think I'm just going to fire up my new MVE with my old 620w seasonic PSU just to make sure it isn't DOA because there is so many small little trinkets on that board that I'm really worried that something might be wrong with it. Also, I'm going crazy not having a rig to play with!!!
post #14869 of 34072
Quote:
Originally Posted by ivanlabrie View Post

But, older card...dx9 only. Those benchies eat cpu clocks like there's no tomorrow.
I'm gonna be beat with my current max oc of 4.2ghz cpu. WORST cpu ever!

Some difference but very little, the gpu is a bottleneck. I would have to find screens,but in the gt210 competition overclocking the cpu another Ghz made almost no difference in aquamark or 03.

With the little cards it almost turns into a vram overclocking competition,memory speed on the card makes the most difference in benches.
    
CPUMotherboardGraphicsRAM
i7 990x/3930k/3770k/4770k GB x58a-OC/Asus RIVE/x79 gd65/z77 mpower/z77 MV... gtx480s/gtx580s/7970s/680s/Titan Hyper/PSC/BBSE/Hynix/Samsung 
Hard DriveOptical DriveCoolingOS
HDDs/SSDs DVD Air/water/phase/copper pot Windowz 
MonitorKeyboardPowerCase
samsung 2320 Razer Lycosa ax1200 carboard box 
Mouse
Trackball 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 990x/3930k/3770k/4770k GB x58a-OC/Asus RIVE/x79 gd65/z77 mpower/z77 MV... gtx480s/gtx580s/7970s/680s/Titan Hyper/PSC/BBSE/Hynix/Samsung 
Hard DriveOptical DriveCoolingOS
HDDs/SSDs DVD Air/water/phase/copper pot Windowz 
MonitorKeyboardPowerCase
samsung 2320 Razer Lycosa ax1200 carboard box 
Mouse
Trackball 
  hide details  
Reply
post #14870 of 34072
Quote:
FtW 420 wrote...With the little cards cpu speed becomes much less of a factor, there probably wouldn't be much difference between 4Ghz & 5Ghz cpu anyway, low clock will be fine.
Playing on a 3930k right now but have to get the 1155 rig back up soon, need to work on memory clock for the pro cup, gotta make sure OCN stays out of last place at least!

...on the HWBot Team side, Overclock.net is currently in 4th but what name are you guys using on the HWBot Pro OC ? ...don't seem to be able to find it mad.gif

...got the ROG Rampage IV E and LG2011 3970x on order, I can hardly wait to run the delidded Ivy on the LG1155 ROG Max V E against it...more cores against faster IMC...any bets @ 'clock-for-clock', other than Cinebench etc ? I figure 3D11 should be faster on the 3970X (Physics score), but I am not so sure about Unigine stuff such as Valley, Heaven etc

...then on to some more extreme (non-LN2) cooling for the Ivy / Max V E smile.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide