Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 1511

post #15101 of 33641
Quote:
Originally Posted by stickg1 View Post

Yeah that's one way to do it. If you have access to a Vise like that then try it out. Razor blades are cheaper than a 30lb bench mounted vise.

I dunno about 30lb. I can pick it up with one hand. They are hardened metal jaws, no rubber. Dunno why you'd be worried about a mark on the side of the IHS though.
post #15102 of 33641
Quote:
Originally Posted by justanoldman View Post

If some is going to go the vise method, I would think that rotational torque would put far less stress on the pcb than the shear force created by a hammer blow. If the glue can be “knocked” off, one would surmise that it could be twisted off with less force.

The question is how to turn the pcb. A block wood with a pcb sized cutout would work, but that seems like too much trouble.

That was my original intentions, I just could not find my channel locks when I looked for them, so reached for the hammer instead.

I was going to use a pair of channel locks, with some spare neoprene rubber I have lying around to cushion the jaws. I'm sure a twist would be as good as a thump.
post #15103 of 33641
Quote:
Originally Posted by Joa3d43 View Post

..yes - that is VERY important

...also, DO NOT let the ends of the blade anywhere near the pcb at all (that's how 99% of the scratches occur)...use the center of the blade above the pcb and angled at the IHS a bit

Use force towards the IHS your not gonna kill the chip by bending the PCB a little bit.. i bent the crap out of mine lol...

I also started with a regular razor blade on the corners then used a thinner longer and sharper one to finish the job.



After i started with regular blade.
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
post #15104 of 33641
Quote:
Originally Posted by Joa3d43 View Post

..yes - that is VERY important

...also, DO NOT let the ends of the blade anywhere near the pcb at all (that's how 99% of the scratches occur)...use the center of the blade above the pcb and angled at the IHS a bit

but when i get the sides, the ends of the blade does have to get near the pcb right?

or is there another technique?
Silent But Deadly
(15 items)
 
  
CPUMotherboardGraphicsRAM
3570k @4.4 Gigabyte Z77X-UD3H Powercolor AMD 470 8GB Samsung 
Hard DriveCoolingCoolingOS
Cricual M4 64 / WD6400AAKS Silver Arrow SB-E Arctic Cooling 7970 7 64 Ultimate 
MonitorPowerCaseMouse
BenQ XL2410T Corsair AX650 Fractal Define R4 Logitech G5 
  hide details  
Reply
Silent But Deadly
(15 items)
 
  
CPUMotherboardGraphicsRAM
3570k @4.4 Gigabyte Z77X-UD3H Powercolor AMD 470 8GB Samsung 
Hard DriveCoolingCoolingOS
Cricual M4 64 / WD6400AAKS Silver Arrow SB-E Arctic Cooling 7970 7 64 Ultimate 
MonitorPowerCaseMouse
BenQ XL2410T Corsair AX650 Fractal Define R4 Logitech G5 
  hide details  
Reply
post #15105 of 33641
Quote:
Originally Posted by homestyle View Post

but when i get the sides, the ends of the blade does have to get near the pcb right?

or is there another technique?

When I did mine i went corners first, and once you get the corners up, you should have more play, the sides with the retention bracket clip things are easiest to get up first since they arent near the die, and once you get the sides slowly go along the top and bottom, unless of course you want to stick it in a vice and smack it with a hammer. But it took me 15 minutes, I had some microscopic scratches, didnt effect a thing. Just use a stiff razor, I started with a shaving razor and it kept flexing and nicking the edge, thankfully it didnt hurt it
My System
(21 items)
 
  
CPUMotherboardGraphicsRAM
Core i5 3570k ASRock z77 Extreme 4 Sapphire 7950 Corsair Vengeance 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 840 Pro Caviar Black 1TB Caviar Black 500GB Asus DVD+-RW 
CoolingCoolingCoolingOS
Swiftech h220 XSPC EX120 EK Radeon HD 7970 Acrylic CSQ Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
QNIX QX2710 Acer G245HQ Sidewinder x4 SeaSonic S12D 850W Silver 
CaseMouseMouse PadAudio
CoolerMaster HAF XB Razer Mamba 2012 SteelSeries QcK Asus Xonar DG 5.1 
Other
Hauppage Win-TV HVR 2250 
  hide details  
Reply
My System
(21 items)
 
  
CPUMotherboardGraphicsRAM
Core i5 3570k ASRock z77 Extreme 4 Sapphire 7950 Corsair Vengeance 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 840 Pro Caviar Black 1TB Caviar Black 500GB Asus DVD+-RW 
CoolingCoolingCoolingOS
Swiftech h220 XSPC EX120 EK Radeon HD 7970 Acrylic CSQ Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
QNIX QX2710 Acer G245HQ Sidewinder x4 SeaSonic S12D 850W Silver 
CaseMouseMouse PadAudio
CoolerMaster HAF XB Razer Mamba 2012 SteelSeries QcK Asus Xonar DG 5.1 
Other
Hauppage Win-TV HVR 2250 
  hide details  
Reply
post #15106 of 33641
Quote:
Originally Posted by homestyle View Post

but when i get the sides, the ends of the blade does have to get near the pcb right?

or is there another technique?

Think i was in the first 5= 10 to Delid...

Keep the corners away from the PCB at all costs the corners is what kills 90% of ppls cpu's

The sharp ends will cut into the pcb..

Why i used the regular razor blade then the long one.
Edited by Hokies83 - 3/27/13 at 11:38pm
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
post #15107 of 33641
I'll try the vise method tomorrow...probably. Need to grab a deliddable chip, the dead G620 is soldered so it's not gonna come off easily.
post #15108 of 33641
Quote:
Originally Posted by ivanlabrie View Post

I'll try the vise method tomorrow...probably. Need to grab a deliddable chip, the dead G620 is soldered so it's not gonna come off easily.

I have one of those.. but mine is long de lidded heh...

Guess ill try it with Haswell / Broadwell
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
post #15109 of 33641
hehe...my new 3770k still has the lid on its die.
Don't wanna kill my only cpu so I'm not compromising it till I get a second one.
post #15110 of 33641
Quote:
Originally Posted by ivanlabrie View Post

hehe...my new 3770k still has the lid on its die.
Don't wanna kill my only cpu so I'm not compromising it till I get a second one.

Yea, I gotta wait until I get more money until I delid my 2nd one. tongue.gif
Swag's Venus
(18 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k @ 4.8GHz Asus Maximus V Gene EVGA GTX 680 G.Skill RipJaws X 16GB (2x8GB) 
Hard DriveHard DriveCoolingOS
Samsung 830 Crucial M4 Corsair H100i Windows 7 
MonitorMonitorKeyboardPower
Dell U2713HM Crossover 27Q (3x) Ducky TKL OCN-Version Corsair AX650 
CaseMouseMouse PadAudio
Corsair C70 (Military Green) Razer DeathAdder BE Steelseries QCK+ Beats Pro 
AudioAudio
Bose Surround Sound 5.1 Beats Tours 
  hide details  
Reply
Swag's Venus
(18 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k @ 4.8GHz Asus Maximus V Gene EVGA GTX 680 G.Skill RipJaws X 16GB (2x8GB) 
Hard DriveHard DriveCoolingOS
Samsung 830 Crucial M4 Corsair H100i Windows 7 
MonitorMonitorKeyboardPower
Dell U2713HM Crossover 27Q (3x) Ducky TKL OCN-Version Corsair AX650 
CaseMouseMouse PadAudio
Corsair C70 (Military Green) Razer DeathAdder BE Steelseries QCK+ Beats Pro 
AudioAudio
Bose Surround Sound 5.1 Beats Tours 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide