Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 1512

post #15111 of 33564
Quote:
Originally Posted by ivanlabrie View Post

hehe...my new 3770k still has the lid on its die.
Don't wanna kill my only cpu so I'm not compromising it till I get a second one.

That's exactly how I felt . . . until I stumbled upon the "razorless method" and now I'm sitting here with 20-23c cooler temps !!! 1/1 delid success LoL thumb.gif

Gooble Goble, gooble goble, one of us, one of us . . . LoL
Storm Trooper
(17 items)
 
  
CPUMotherboardGraphicsGraphics
i7 3770k @ 4.6 Stable Gigabyte GA-Z77X-UD5H XFX Double D HD7870 XFX Double D HD7870 
RAMHard DriveOptical DriveCooling
G.Skill Sniper Series 1866 Samsung 830 128GB LiteOn Blu-Ray Hyper 212 Evo 
OSMonitorKeyboardPower
Win7 x64 Ultimate ASUS VS239H-P 23" Sidewinder X4 Capstone 650-M 
CaseMouseMouse PadOther
Storm Stryker Storm Xornet Black Icemat Black NZXT Aperture M 5.25 Bay Multi-Media Mesh Style... 
Other
NZXT Sentry Mesh Fan Controller w/ Five 30W Cha... 
  hide details  
Reply
Storm Trooper
(17 items)
 
  
CPUMotherboardGraphicsGraphics
i7 3770k @ 4.6 Stable Gigabyte GA-Z77X-UD5H XFX Double D HD7870 XFX Double D HD7870 
RAMHard DriveOptical DriveCooling
G.Skill Sniper Series 1866 Samsung 830 128GB LiteOn Blu-Ray Hyper 212 Evo 
OSMonitorKeyboardPower
Win7 x64 Ultimate ASUS VS239H-P 23" Sidewinder X4 Capstone 650-M 
CaseMouseMouse PadOther
Storm Stryker Storm Xornet Black Icemat Black NZXT Aperture M 5.25 Bay Multi-Media Mesh Style... 
Other
NZXT Sentry Mesh Fan Controller w/ Five 30W Cha... 
  hide details  
Reply
post #15112 of 33564
Holy crap it's harder than you would think to find shim material that is appropriately sized to replace the IHS hold downs.

With the glue + metal the wings are 1.2mm thick ~ 3/64". Width has to be within the (estimated) range of .295 to .422 in.

Finally McMaster came through with:

Multipurpose O1 Tool Steel Tight-Tolerance Flat Stock, 3/64" X 3/4", 1-1/2'L

3/4" is exactly twice the width I need (.375 in) , so I will have to dremel it in half.



Now I just have to delid my chip which Xinoxide has volunteered to do via the razor blade method. Anyone wanna volunteer to try with the hammer and vise method, which seems somewhat safer?
post #15113 of 33564
Quote:
Originally Posted by dr/owned View Post

Holy crap it's harder than you would think to find shim material that is appropriately sized to replace the IHS hold downs.

With the glue + metal the wings are 1.2mm thick ~ 3/64". Width has to be within the (estimated) range of .295 to .422 in.

Finally McMaster came through with:

Multipurpose O1 Tool Steel Tight-Tolerance Flat Stock, 3/64" X 3/4", 1-1/2'L

3/4" is exactly twice the width I need (.375 in) , so I will have to dremel it in half.



Now I just have to delid my chip which Xinoxide has volunteered to do via the razor blade method. Anyone wanna volunteer to try with the hammer and vise method, which seems somewhat safer?

Whoever delids their chip with a hammer, Please, make a video! I suspect a hoax. I doubt it is as easy as the demo on youtube. Question: What is the "G" shock rating of ivy bridge?, What is the possible "G" shock out of a hammer blow? If the glue is heated will it not flex, stretch, or bounce on impact, if it was chilled would it make the glue more brittle requiring less force? Lets be responsible and test this method scientifically. again - I would love to see a video of the "hammer the IHS off your ivy" method. or the "Oreo cookie twist the IHS off your ivy" or the "cut holes in your IHS and directly water cool the die" I have an idea: put it in the oven and get it really hot so the glue melts called it the "open grill-cheese sandwich delided ivy" method. Preheat the oven at X degrees for X2 minutes, place the chip in a non-greased, non-floured pan, Bake the chip at Y degrees for Y2 minutes remove from oven, CAUTION chip may be hot! immediately open IVY BRIDGE Like a clam with hotpad themal gloves. I'm gunna need about 10 3770k to find the optimal temperature and provide a baseline for statistical success rates. devil.gif TonicX devil.gif
   
CPUMotherboardGraphicsRAM
Intel® Core™ i7-3770K Processor - Delidded - Co... P8Z77-M PRO Intel(R) HD Graphics 4000 Kingston HyperX 16GB (4 x 4GB) 240-Pin DDR3 SDR... 
Hard DriveOptical DriveCoolingOS
Pyro 60GB SATA III 2.5(PP60GS25SSDR) no Hydro Series™ H60 High Performance Liquid CPU C... Windows 8 Professional 64bit 
MonitorMonitorMonitorMonitor
ACER X223W LCD Monitor ACER X223W LCD Monitor ACER X223W LCD Monitor ACER X223W LCD Monitor 
KeyboardPowerCaseMouse
Gaming Keyboard G105: Made for Call of Duty® CORSAIR CX 750 M Modular Power Supply INLAND PS_301 GENERAL ELECTRIC OPTICAL MOUSE 
Mouse PadAudio
Microcenter Mouse Pad  CA 
CPUMotherboardGraphicsRAM
Intel Core 2 Quad Q9400 EP45-UD3LR NVIDIA GeForce GT 240 OCZ  
RAMRAMRAM
OCZ  OCZ  OCZ  
  hide details  
Reply
   
CPUMotherboardGraphicsRAM
Intel® Core™ i7-3770K Processor - Delidded - Co... P8Z77-M PRO Intel(R) HD Graphics 4000 Kingston HyperX 16GB (4 x 4GB) 240-Pin DDR3 SDR... 
Hard DriveOptical DriveCoolingOS
Pyro 60GB SATA III 2.5(PP60GS25SSDR) no Hydro Series™ H60 High Performance Liquid CPU C... Windows 8 Professional 64bit 
MonitorMonitorMonitorMonitor
ACER X223W LCD Monitor ACER X223W LCD Monitor ACER X223W LCD Monitor ACER X223W LCD Monitor 
KeyboardPowerCaseMouse
Gaming Keyboard G105: Made for Call of Duty® CORSAIR CX 750 M Modular Power Supply INLAND PS_301 GENERAL ELECTRIC OPTICAL MOUSE 
Mouse PadAudio
Microcenter Mouse Pad  CA 
CPUMotherboardGraphicsRAM
Intel Core 2 Quad Q9400 EP45-UD3LR NVIDIA GeForce GT 240 OCZ  
RAMRAMRAM
OCZ  OCZ  OCZ  
  hide details  
Reply
post #15114 of 33564
Quote:
Originally Posted by TonicX View Post



Whoever delids their chip with a hammer, Please, make a video! I suspect a hoax. I doubt it is as easy as the demo on youtube. Question: What is the "G" shock rating of ivy bridge?, What is the possible "G" shock out of a hammer blow? If the glue is heated will it not flex, stretch, or bounce on impact, if it was chilled would it make the glue more brittle requiring less force? Lets be responsible and test this method scientifically. again - I would love to see a video of the "hammer the IHS off your ivy" method. or the "Oreo cookie twist the IHS off your ivy" or the "cut holes in your IHS and directly water cool the die" I have an idea: put it in the oven and get it really hot so the glue melts called it the "open grill-cheese sandwich delided ivy" method. Preheat the oven at X degrees for X2 minutes, place the chip in a non-greased, non-floured pan, Bake the chip at Y degrees for Y2 minutes remove from oven, CAUTION chip may be hot! immediately open IVY BRIDGE Like a clam with hotpad themal gloves. I'm gunna need about 10 3770k to find the optimal temperature and provide a baseline for statistical success rates. devil.gif TonicX devil.gif

I dont think there is any G shock rating .
post #15115 of 33564
Quote:
Originally Posted by SilentAD View Post

Woooooow!!! Considering I'm making this post, it means my first delid experience was a SUCCESS ! I used the good ol' vice+wood+hammer method seeing as how I simply COULD NOT fit even the thinnest of razors between my CPU's IHS and PCB. And holy CRAP! are the temp results worth it alone!

Prior to delid, stable at 43 @ highest temps 94c, found out this was because of a horrible seating on the heatsink.

Post delid, retesting p95 on 43 with highest temps of about 72-74c, but this is with a better seating on the heatsink. This however I don't feel is a significant factor in that, prior to switching from my z77 extreme4 to my now ud5h, I was stable at 45 with highest temps of 93c with a good seating on the heatsink soooooo . . .

Pics to come once I find my max stable OC and get a validation so I can join the club wheee.gif

Delid Success: 1
Delid Failure: 0

Good job! Now go buy some CLU so you can actually see some "real" temp drops!
Edited by RavageTheEarth - 3/28/13 at 4:09am
post #15116 of 33564
Quote:
Originally Posted by FtW 420 View Post

I've always wanted to do this, but funds...
I can only watch the guys at hwbot buying pallets of 3770k to bin through & dream.
Start working out in the front yard.

Naked.

Warming up with jumping jacks should have their curtains closed in no time.

Don't forget to stretch!!!

Quote:
Originally Posted by fnarfbargle View Post

I dunno about 30lb. I can pick it up with one hand. They are hardened metal jaws, no rubber. Dunno why you'd be worried about a mark on the side of the IHS though.

I suppose you can use a lighter one, I have 3 or 4 of them. They're all 25lbs or heavier. All I'm saying is, if you don't already have one or have access to one, then going out and buying a $50-$100 bench vise is kind of silly. And there are real issues stemming from scratching or in other ways damaging your IHS but I won't discuss them on this forum.
post #15117 of 33564
Quote:
Originally Posted by TonicX View Post



Whoever delids their chip with a hammer, Please, make a video! I suspect a hoax. I doubt it is as easy as the demo on youtube

*ahem* smile.gif
http://www.overclock.net/t/1370209/delid-3570k-without-a-razor-blade/30#post_19602052
Edited by fnarfbargle - 3/28/13 at 5:48am
post #15118 of 33564
Quote:
Originally Posted by homestyle View Post

when I insert the blade should I angle the blade towards the ihs so I don't get the blade near the pcb?
yes thumb.gif
Daily Rig
(21 items)
 
Bench Setup
(19 items)
 
 
CPUMotherboardGraphicsRAM
5820k 4.7Ghz @ 1.28vcore / 1.88vccin Gigabyte x99 SOC Champion EVGA GTX 1080Ti G.SKILL Trident Z 32GB 3200Mhz CL14 
Hard DriveHard DriveHard DriveHard Drive
2x Intel 520 120Gb SSD in RAID 0  Intel 180Gb 530 SSD OS Drive 2Tb WD HDD  2x Intel 730 SSD 480GB in RAID 0 
CoolingCoolingCoolingCooling
2x HWLabs GTX360 Black Ice in Push Pull EK blocks for CPU / GPU's 6x corsair sp120 2350RPM 6x Ek Vardar 120 F4's 2200rpm  
OSMonitorKeyboardPower
windows 10 XB270HU 2560x1440 - 144Hz - G-sync Razor blackwidow cooler master V1000 
CaseMouseMouse PadAudio
Corsair 780T EVGA TORQ x10 evga mouse pad 2.1 audio / Hyper X cloud II / Sennheiser Gam... 
Other
EK pump / res 
CPUMotherboardGraphicsGraphics
6600k Z170M OC Formula GTX780Ti AMD HD6450 
RAMHard DriveHard DriveHard Drive
Trident Z 3600Mhz cl16 2x8GB 120Gb intel 520 120Gb intel 520 64Gb adata ssd  
Hard DriveOptical DriveCoolingCooling
750Gb WD Black Sony  F1 Gemini CPU Pot Tek - 9 Fat 
CoolingOSMonitorPower
custom loop two 240rad's xp,W7,W8,W10 x-star 2560x1440  Rosewill Quark-650 Platinum / Antec HCP-850 Pla... 
CaseMouseMouse Pad
Dimastech Mini V1.0 black razor abyssus Razor 
  hide details  
Reply
Daily Rig
(21 items)
 
Bench Setup
(19 items)
 
 
CPUMotherboardGraphicsRAM
5820k 4.7Ghz @ 1.28vcore / 1.88vccin Gigabyte x99 SOC Champion EVGA GTX 1080Ti G.SKILL Trident Z 32GB 3200Mhz CL14 
Hard DriveHard DriveHard DriveHard Drive
2x Intel 520 120Gb SSD in RAID 0  Intel 180Gb 530 SSD OS Drive 2Tb WD HDD  2x Intel 730 SSD 480GB in RAID 0 
CoolingCoolingCoolingCooling
2x HWLabs GTX360 Black Ice in Push Pull EK blocks for CPU / GPU's 6x corsair sp120 2350RPM 6x Ek Vardar 120 F4's 2200rpm  
OSMonitorKeyboardPower
windows 10 XB270HU 2560x1440 - 144Hz - G-sync Razor blackwidow cooler master V1000 
CaseMouseMouse PadAudio
Corsair 780T EVGA TORQ x10 evga mouse pad 2.1 audio / Hyper X cloud II / Sennheiser Gam... 
Other
EK pump / res 
CPUMotherboardGraphicsGraphics
6600k Z170M OC Formula GTX780Ti AMD HD6450 
RAMHard DriveHard DriveHard Drive
Trident Z 3600Mhz cl16 2x8GB 120Gb intel 520 120Gb intel 520 64Gb adata ssd  
Hard DriveOptical DriveCoolingCooling
750Gb WD Black Sony  F1 Gemini CPU Pot Tek - 9 Fat 
CoolingOSMonitorPower
custom loop two 240rad's xp,W7,W8,W10 x-star 2560x1440  Rosewill Quark-650 Platinum / Antec HCP-850 Pla... 
CaseMouseMouse Pad
Dimastech Mini V1.0 black razor abyssus Razor 
  hide details  
Reply
post #15119 of 33564
Quote:
Originally Posted by Hokies83 View Post

Think i was in the first 5= 10 to Delid...

Keep the corners away from the PCB at all costs the corners is what kills 90% of ppls cpu's

The sharp ends will cut into the pcb..

Why i used the regular razor blade then the long one.
Quote:
Originally Posted by homestyle View Post

but when i get the sides, the ends of the blade does have to get near the pcb right?

or is there another technique?
agreed 100% biggrin.gif
Daily Rig
(21 items)
 
Bench Setup
(19 items)
 
 
CPUMotherboardGraphicsRAM
5820k 4.7Ghz @ 1.28vcore / 1.88vccin Gigabyte x99 SOC Champion EVGA GTX 1080Ti G.SKILL Trident Z 32GB 3200Mhz CL14 
Hard DriveHard DriveHard DriveHard Drive
2x Intel 520 120Gb SSD in RAID 0  Intel 180Gb 530 SSD OS Drive 2Tb WD HDD  2x Intel 730 SSD 480GB in RAID 0 
CoolingCoolingCoolingCooling
2x HWLabs GTX360 Black Ice in Push Pull EK blocks for CPU / GPU's 6x corsair sp120 2350RPM 6x Ek Vardar 120 F4's 2200rpm  
OSMonitorKeyboardPower
windows 10 XB270HU 2560x1440 - 144Hz - G-sync Razor blackwidow cooler master V1000 
CaseMouseMouse PadAudio
Corsair 780T EVGA TORQ x10 evga mouse pad 2.1 audio / Hyper X cloud II / Sennheiser Gam... 
Other
EK pump / res 
CPUMotherboardGraphicsGraphics
6600k Z170M OC Formula GTX780Ti AMD HD6450 
RAMHard DriveHard DriveHard Drive
Trident Z 3600Mhz cl16 2x8GB 120Gb intel 520 120Gb intel 520 64Gb adata ssd  
Hard DriveOptical DriveCoolingCooling
750Gb WD Black Sony  F1 Gemini CPU Pot Tek - 9 Fat 
CoolingOSMonitorPower
custom loop two 240rad's xp,W7,W8,W10 x-star 2560x1440  Rosewill Quark-650 Platinum / Antec HCP-850 Pla... 
CaseMouseMouse Pad
Dimastech Mini V1.0 black razor abyssus Razor 
  hide details  
Reply
Daily Rig
(21 items)
 
Bench Setup
(19 items)
 
 
CPUMotherboardGraphicsRAM
5820k 4.7Ghz @ 1.28vcore / 1.88vccin Gigabyte x99 SOC Champion EVGA GTX 1080Ti G.SKILL Trident Z 32GB 3200Mhz CL14 
Hard DriveHard DriveHard DriveHard Drive
2x Intel 520 120Gb SSD in RAID 0  Intel 180Gb 530 SSD OS Drive 2Tb WD HDD  2x Intel 730 SSD 480GB in RAID 0 
CoolingCoolingCoolingCooling
2x HWLabs GTX360 Black Ice in Push Pull EK blocks for CPU / GPU's 6x corsair sp120 2350RPM 6x Ek Vardar 120 F4's 2200rpm  
OSMonitorKeyboardPower
windows 10 XB270HU 2560x1440 - 144Hz - G-sync Razor blackwidow cooler master V1000 
CaseMouseMouse PadAudio
Corsair 780T EVGA TORQ x10 evga mouse pad 2.1 audio / Hyper X cloud II / Sennheiser Gam... 
Other
EK pump / res 
CPUMotherboardGraphicsGraphics
6600k Z170M OC Formula GTX780Ti AMD HD6450 
RAMHard DriveHard DriveHard Drive
Trident Z 3600Mhz cl16 2x8GB 120Gb intel 520 120Gb intel 520 64Gb adata ssd  
Hard DriveOptical DriveCoolingCooling
750Gb WD Black Sony  F1 Gemini CPU Pot Tek - 9 Fat 
CoolingOSMonitorPower
custom loop two 240rad's xp,W7,W8,W10 x-star 2560x1440  Rosewill Quark-650 Platinum / Antec HCP-850 Pla... 
CaseMouseMouse Pad
Dimastech Mini V1.0 black razor abyssus Razor 
  hide details  
Reply
post #15120 of 33564
So does clu become like an adhesive?

Clamping the cpu on the mobo moves the ihs a little. So if i were to switch mobos after my first delid would i need to do another application of clu under the ihs or would the clu be strong enough to hold the ihs in place?

Obviously i would have to reapply on the top of ihs.
Silent But Deadly
(15 items)
 
  
CPUMotherboardGraphicsRAM
3570k @4.4 Gigabyte Z77X-UD3H Powercolor AMD 470 8GB Samsung 
Hard DriveCoolingCoolingOS
Cricual M4 64 / WD6400AAKS Silver Arrow SB-E Arctic Cooling 7970 7 64 Ultimate 
MonitorPowerCaseMouse
BenQ XL2410T Corsair AX650 Fractal Define R4 Logitech G5 
  hide details  
Reply
Silent But Deadly
(15 items)
 
  
CPUMotherboardGraphicsRAM
3570k @4.4 Gigabyte Z77X-UD3H Powercolor AMD 470 8GB Samsung 
Hard DriveCoolingCoolingOS
Cricual M4 64 / WD6400AAKS Silver Arrow SB-E Arctic Cooling 7970 7 64 Ultimate 
MonitorPowerCaseMouse
BenQ XL2410T Corsair AX650 Fractal Define R4 Logitech G5 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide