Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 1530

post #15291 of 34072
Quote:
Originally Posted by Joa3d43 View Post

Use of silver...

Per earlier post about the chap who had fully customized his CPU block and subsequently silver-plated it...


...there is another important item, noting that the whole thing is silver-plated, including the inside of the block that comes in contact with the cooling liquids (see small pics inside the bigger one): Silver is anti-bacterial, and as such is often used in liquid-cooled systems in some form or another to control bacterial growth - even if you started out with distilled water etc. Often, folks use a small piece of silver anchored in the reservoir. I find the approach above quite unique and 'outside the box', with additional benefits such as the anti-bacterial qualities.

Wish we could use graphene.. That would be where its at. Maybe in 10 years.
post #15292 of 34072
I just delidded and I'm using ic diamond on the die and prolimatech tim on the ihs.

my temps under intel burn test are

78
91
91
89

Should I try a reseat? I was sliding the ihs around as the retention bracket was moving the ihs. The range from core 0 to 1 and 2 seem large.

in b4 CLU. That is an option in the future.

btw, my temps are high because my fans are all on low. I'm comparing my temps and keeping all variables the same except for of course the delid.
Silent But Deadly
(15 items)
 
  
CPUMotherboardGraphicsRAM
3570k @4.4 Gigabyte Z77X-UD3H Powercolor AMD 470 8GB Samsung 
Hard DriveCoolingCoolingOS
Cricual M4 64 / WD6400AAKS Silver Arrow SB-E Arctic Cooling 7970 7 64 Ultimate 
MonitorPowerCaseMouse
BenQ XL2410T Corsair AX650 Fractal Define R4 Logitech G5 
  hide details  
Reply
Silent But Deadly
(15 items)
 
  
CPUMotherboardGraphicsRAM
3570k @4.4 Gigabyte Z77X-UD3H Powercolor AMD 470 8GB Samsung 
Hard DriveCoolingCoolingOS
Cricual M4 64 / WD6400AAKS Silver Arrow SB-E Arctic Cooling 7970 7 64 Ultimate 
MonitorPowerCaseMouse
BenQ XL2410T Corsair AX650 Fractal Define R4 Logitech G5 
  hide details  
Reply
post #15293 of 34072
Quote:
Originally Posted by homestyle View Post

I just delidded and I'm using ic diamond on the die and prolimatech tim on the ihs.

my temps under intel burn test are

78
91
91
89

Should I try a reseat? I was sliding the ihs around as the retention bracket was moving the ihs. The range from core 0 to 1 and 2 seem large.

in b4 CLU. That is an option in the future.

btw, my temps are high because my fans are all on low. I'm comparing my temps and keeping all variables the same except for of course the delid.

Dude you might want to get that IC Diamond off of your die ASAP it is going to scratch the hell out of it. Just a suggestion. I've seen it happen before.
post #15294 of 34072
Quote:
Originally Posted by homestyle View Post

I just delidded and I'm using ic diamond on the die and prolimatech tim on the ihs.

my temps under intel burn test are

78
91
91
89

Should I try a reseat? I was sliding the ihs around as the retention bracket was moving the ihs. The range from core 0 to 1 and 2 seem large.

in b4 CLU. That is an option in the future.

btw, my temps are high because my fans are all on low. I'm comparing my temps and keeping all variables the same except for of course the delid.

First: Congrats thumb.gif

...I think you're right...while there normally us a jump in temps to the two middle cores, it usually is around no more than 7-8C (though there are other things which can affect that, ie iGPU on/off)...if you have the time, you might try a re-seat...

...per other responses, you may want to consider MX4 or s.th. like it instead of IC diamond on the die

...can't remember if you posted the 'pre-delid' temps for comparison - can you post them together with the post-delid (perhaps after re-seat) with all other vars the same (ie fan speed)
post #15295 of 34072
if u dont use CLP or CLU there is no point in deliding buttkick.gif
post #15296 of 34072
...lowering vCore

...as I am prepping the Rampage/RIVE/3970X, I moved the quad channel 32GB TridentX/2400 kit over from the MVE/3770K which in turn is running a new pack of 16GB TridentX/2400....I have never run anything less than 32GB in any of the Z77 machines before for productivity reasons (partial work machines)...but as suspected, reducing the workload of the 3770K IMC (32 > 16) has also meant a slightly lower vCore requirements...still doing longer-run stability testing, but it looks like the change in RAM is saving about 0.005 to 0.01v vCore at given speed settings. smile.gif
post #15297 of 34072
Quote:
Originally Posted by homestyle View Post

I just delidded and I'm using ic diamond on the die and prolimatech tim on the ihs.

my temps under intel burn test are

78
91
91
89

Should I try a reseat? I was sliding the ihs around as the retention bracket was moving the ihs. The range from core 0 to 1 and 2 seem large.

in b4 CLU. That is an option in the future.

btw, my temps are high because my fans are all on low. I'm comparing my temps and keeping all variables the same except for of course the delid.

Well depends on the volts?

H100I is not custom water so do not expect much my H100 in p/p used to get that hot.
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
post #15298 of 34072
Quote:
Originally Posted by Joa3d43 View Post

...lowering vCore

...as I am prepping the Rampage/RIVE/3970X, I moved the quad channel 32GB TridentX/2400 kit over from the MVE/3770K which in turn is running a new pack of 16GB TridentX/2400....I have never run anything less than 32GB in any of the Z77 machines before for productivity reasons (partial work machines)...but as suspected, reducing the workload of the 3770K IMC (32 > 16) has also meant a slightly lower vCore requirements...still doing longer-run stability testing, but it looks like the change in RAM is saving about 0.005 to 0.01v vCore at given speed settings. smile.gif

Have you ever ran any DDR3 1600 with your 3770k? I currently have 1600, but was thinking of upgrading RAM to 2400 since I have a nice new MVE board, but am scared of having to up the vcore more. I'm just wondering how much I will have to up the vcore.
post #15299 of 34072
icd will scratch the surface, but the scratches are superficial.

the bigger concern is pump-out of tim.

CLU is in my plans in the future, but the main gain from delidding is not from changing out the tim. It's from reducing the ihs-die gap by removing the glue.

i'm gonna do a reseat and if temps are better and remain better, I'm gonna keep it on.
Silent But Deadly
(15 items)
 
  
CPUMotherboardGraphicsRAM
3570k @4.4 Gigabyte Z77X-UD3H Powercolor AMD 470 8GB Samsung 
Hard DriveCoolingCoolingOS
Cricual M4 64 / WD6400AAKS Silver Arrow SB-E Arctic Cooling 7970 7 64 Ultimate 
MonitorPowerCaseMouse
BenQ XL2410T Corsair AX650 Fractal Define R4 Logitech G5 
  hide details  
Reply
Silent But Deadly
(15 items)
 
  
CPUMotherboardGraphicsRAM
3570k @4.4 Gigabyte Z77X-UD3H Powercolor AMD 470 8GB Samsung 
Hard DriveCoolingCoolingOS
Cricual M4 64 / WD6400AAKS Silver Arrow SB-E Arctic Cooling 7970 7 64 Ultimate 
MonitorPowerCaseMouse
BenQ XL2410T Corsair AX650 Fractal Define R4 Logitech G5 
  hide details  
Reply
post #15300 of 34072
Quote:
Originally Posted by stickg1 View Post

Where is everyone? I'm over here getting toasted. I went to a local craft beer store and am doing an American IPA show-down. So far all 8 are winning! thumb.gif
Quote:
Originally Posted by RavageTheEarth View Post

Its quiet in here...........

............too quiet guiltysmiley.gif

If I posted, it'd probably be OT and some people didn't like it last time. tongue.gif

@stickg1
What IPA's are you trying? I recently tried this Canadian one and it's pretty good. thumb.gif
Swag's Venus
(18 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k @ 4.8GHz Asus Maximus V Gene EVGA GTX 680 G.Skill RipJaws X 16GB (2x8GB) 
Hard DriveHard DriveCoolingOS
Samsung 830 Crucial M4 Corsair H100i Windows 7 
MonitorMonitorKeyboardPower
Dell U2713HM Crossover 27Q (3x) Ducky TKL OCN-Version Corsair AX650 
CaseMouseMouse PadAudio
Corsair C70 (Military Green) Razer DeathAdder BE Steelseries QCK+ Beats Pro 
AudioAudio
Bose Surround Sound 5.1 Beats Tours 
  hide details  
Reply
Swag's Venus
(18 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k @ 4.8GHz Asus Maximus V Gene EVGA GTX 680 G.Skill RipJaws X 16GB (2x8GB) 
Hard DriveHard DriveCoolingOS
Samsung 830 Crucial M4 Corsair H100i Windows 7 
MonitorMonitorKeyboardPower
Dell U2713HM Crossover 27Q (3x) Ducky TKL OCN-Version Corsair AX650 
CaseMouseMouse PadAudio
Corsair C70 (Military Green) Razer DeathAdder BE Steelseries QCK+ Beats Pro 
AudioAudio
Bose Surround Sound 5.1 Beats Tours 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide