Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 1541

post #15401 of 33558
Quote:
Originally Posted by FtW 420 View Post

The kit you have is probably better than the corsair kit, I think those are hynix ICs in both, the 2400 c10 is likely higher bin. The trident kit you have should be better for loosening timings to get higher speed, the samsung kits generally do a bit tighter timings but don't reach as high frequencies.
what kinda timmings should i try for 2600mhz i never tried loosening them when i went for 2600
Daily Rig
(21 items)
 
Bench Setup
(19 items)
 
 
CPUMotherboardGraphicsRAM
5820k 4.7Ghz @ 1.28vcore / 1.88vccin Gigabyte x99 SOC Champion EVGA GTX 1080Ti G.SKILL Trident Z 32GB 3200Mhz CL14 
Hard DriveHard DriveHard DriveHard Drive
2x Intel 520 120Gb SSD in RAID 0  Intel 180Gb 530 SSD OS Drive 2Tb WD HDD  2x Intel 730 SSD 480GB in RAID 0 
CoolingCoolingCoolingCooling
2x HWLabs GTX360 Black Ice in Push Pull EK blocks for CPU / GPU's 6x corsair sp120 2350RPM 6x Ek Vardar 120 F4's 2200rpm  
OSMonitorKeyboardPower
windows 10 XB270HU 2560x1440 - 144Hz - G-sync Razor blackwidow cooler master V1000 
CaseMouseMouse PadAudio
Corsair 780T EVGA TORQ x10 evga mouse pad 2.1 audio / Hyper X cloud II / Sennheiser Gam... 
Other
EK pump / res 
CPUMotherboardGraphicsGraphics
6600k Z170M OC Formula GTX780Ti AMD HD6450 
RAMHard DriveHard DriveHard Drive
Trident Z 3600Mhz cl16 2x8GB 120Gb intel 520 120Gb intel 520 64Gb adata ssd  
Hard DriveOptical DriveCoolingCooling
750Gb WD Black Sony  F1 Gemini CPU Pot Tek - 9 Fat 
CoolingOSMonitorPower
custom loop two 240rad's xp,W7,W8,W10 x-star 2560x1440  Rosewill Quark-650 Platinum / Antec HCP-850 Pla... 
CaseMouseMouse Pad
Dimastech Mini V1.0 black razor abyssus Razor 
  hide details  
Reply
Daily Rig
(21 items)
 
Bench Setup
(19 items)
 
 
CPUMotherboardGraphicsRAM
5820k 4.7Ghz @ 1.28vcore / 1.88vccin Gigabyte x99 SOC Champion EVGA GTX 1080Ti G.SKILL Trident Z 32GB 3200Mhz CL14 
Hard DriveHard DriveHard DriveHard Drive
2x Intel 520 120Gb SSD in RAID 0  Intel 180Gb 530 SSD OS Drive 2Tb WD HDD  2x Intel 730 SSD 480GB in RAID 0 
CoolingCoolingCoolingCooling
2x HWLabs GTX360 Black Ice in Push Pull EK blocks for CPU / GPU's 6x corsair sp120 2350RPM 6x Ek Vardar 120 F4's 2200rpm  
OSMonitorKeyboardPower
windows 10 XB270HU 2560x1440 - 144Hz - G-sync Razor blackwidow cooler master V1000 
CaseMouseMouse PadAudio
Corsair 780T EVGA TORQ x10 evga mouse pad 2.1 audio / Hyper X cloud II / Sennheiser Gam... 
Other
EK pump / res 
CPUMotherboardGraphicsGraphics
6600k Z170M OC Formula GTX780Ti AMD HD6450 
RAMHard DriveHard DriveHard Drive
Trident Z 3600Mhz cl16 2x8GB 120Gb intel 520 120Gb intel 520 64Gb adata ssd  
Hard DriveOptical DriveCoolingCooling
750Gb WD Black Sony  F1 Gemini CPU Pot Tek - 9 Fat 
CoolingOSMonitorPower
custom loop two 240rad's xp,W7,W8,W10 x-star 2560x1440  Rosewill Quark-650 Platinum / Antec HCP-850 Pla... 
CaseMouseMouse Pad
Dimastech Mini V1.0 black razor abyssus Razor 
  hide details  
Reply
post #15402 of 33558
Quote:
Originally Posted by lilchronic View Post

what kinda timmings should i try for 2600mhz i never tried loosening them when i went for 2600

I would start at 11-13-13 leaving the rest auto, then try to tighten up from there. The cas & trcd probably won't want to tighten up, but the trp & tras might, & then tertiary & secondaries.
    
CPUMotherboardGraphicsRAM
i7 990x/3930k/3770k/4770k GB x58a-OC/Asus RIVE/x79 gd65/z77 mpower/z77 MV... gtx480s/gtx580s/7970s/680s/Titan Hyper/PSC/BBSE/Hynix/Samsung 
Hard DriveOptical DriveCoolingOS
HDDs/SSDs DVD Air/water/phase/copper pot Windowz 
MonitorKeyboardPowerCase
samsung 2320 Razer Lycosa ax1200 carboard box 
Mouse
Trackball 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 990x/3930k/3770k/4770k GB x58a-OC/Asus RIVE/x79 gd65/z77 mpower/z77 MV... gtx480s/gtx580s/7970s/680s/Titan Hyper/PSC/BBSE/Hynix/Samsung 
Hard DriveOptical DriveCoolingOS
HDDs/SSDs DVD Air/water/phase/copper pot Windowz 
MonitorKeyboardPowerCase
samsung 2320 Razer Lycosa ax1200 carboard box 
Mouse
Trackball 
  hide details  
Reply
post #15403 of 33558
ok i tried 2600mhz 11-13-13 it faild and i went to 1.7v then i tried 12 -13-13 and it worked @ 1.7 but crashed after i booted in winows so i tried 1.725 it failed instantly so now im @ 2400 with 10-10-12 1.67v
Daily Rig
(21 items)
 
Bench Setup
(19 items)
 
 
CPUMotherboardGraphicsRAM
5820k 4.7Ghz @ 1.28vcore / 1.88vccin Gigabyte x99 SOC Champion EVGA GTX 1080Ti G.SKILL Trident Z 32GB 3200Mhz CL14 
Hard DriveHard DriveHard DriveHard Drive
2x Intel 520 120Gb SSD in RAID 0  Intel 180Gb 530 SSD OS Drive 2Tb WD HDD  2x Intel 730 SSD 480GB in RAID 0 
CoolingCoolingCoolingCooling
2x HWLabs GTX360 Black Ice in Push Pull EK blocks for CPU / GPU's 6x corsair sp120 2350RPM 6x Ek Vardar 120 F4's 2200rpm  
OSMonitorKeyboardPower
windows 10 XB270HU 2560x1440 - 144Hz - G-sync Razor blackwidow cooler master V1000 
CaseMouseMouse PadAudio
Corsair 780T EVGA TORQ x10 evga mouse pad 2.1 audio / Hyper X cloud II / Sennheiser Gam... 
Other
EK pump / res 
CPUMotherboardGraphicsGraphics
6600k Z170M OC Formula GTX780Ti AMD HD6450 
RAMHard DriveHard DriveHard Drive
Trident Z 3600Mhz cl16 2x8GB 120Gb intel 520 120Gb intel 520 64Gb adata ssd  
Hard DriveOptical DriveCoolingCooling
750Gb WD Black Sony  F1 Gemini CPU Pot Tek - 9 Fat 
CoolingOSMonitorPower
custom loop two 240rad's xp,W7,W8,W10 x-star 2560x1440  Rosewill Quark-650 Platinum / Antec HCP-850 Pla... 
CaseMouseMouse Pad
Dimastech Mini V1.0 black razor abyssus Razor 
  hide details  
Reply
Daily Rig
(21 items)
 
Bench Setup
(19 items)
 
 
CPUMotherboardGraphicsRAM
5820k 4.7Ghz @ 1.28vcore / 1.88vccin Gigabyte x99 SOC Champion EVGA GTX 1080Ti G.SKILL Trident Z 32GB 3200Mhz CL14 
Hard DriveHard DriveHard DriveHard Drive
2x Intel 520 120Gb SSD in RAID 0  Intel 180Gb 530 SSD OS Drive 2Tb WD HDD  2x Intel 730 SSD 480GB in RAID 0 
CoolingCoolingCoolingCooling
2x HWLabs GTX360 Black Ice in Push Pull EK blocks for CPU / GPU's 6x corsair sp120 2350RPM 6x Ek Vardar 120 F4's 2200rpm  
OSMonitorKeyboardPower
windows 10 XB270HU 2560x1440 - 144Hz - G-sync Razor blackwidow cooler master V1000 
CaseMouseMouse PadAudio
Corsair 780T EVGA TORQ x10 evga mouse pad 2.1 audio / Hyper X cloud II / Sennheiser Gam... 
Other
EK pump / res 
CPUMotherboardGraphicsGraphics
6600k Z170M OC Formula GTX780Ti AMD HD6450 
RAMHard DriveHard DriveHard Drive
Trident Z 3600Mhz cl16 2x8GB 120Gb intel 520 120Gb intel 520 64Gb adata ssd  
Hard DriveOptical DriveCoolingCooling
750Gb WD Black Sony  F1 Gemini CPU Pot Tek - 9 Fat 
CoolingOSMonitorPower
custom loop two 240rad's xp,W7,W8,W10 x-star 2560x1440  Rosewill Quark-650 Platinum / Antec HCP-850 Pla... 
CaseMouseMouse Pad
Dimastech Mini V1.0 black razor abyssus Razor 
  hide details  
Reply
post #15404 of 33558
Corsair Dominator Platinum 2133 @ 2200MHzCL9 @1.52V.

Teatime
(14 items)
 
Epic $620 Build
(11 items)
 
 
CPUMotherboardGraphicsRAM
6700k Z170 Classified OG Titan x2 Trident V 3000 16gb 
Hard DriveCoolingOSMonitor
SM951 512 + 840Pro 256 + others Raystorm, PMP-500, EK-FCTitan x2, 10 fans of rad Win10 Pro x64  Multi ASUS PB278Q / 85Hz 
KeyboardPowerCaseMouse
Maxkeyboards x8 Purple Corsair AX1200i Enthoo Primo SE (Red) Logitech G502 
Mouse PadAudio
Desk TiHD + DT770Pro/250 +LDMkII 
CPUMotherboardGraphicsRAM
Phenom II X4 960T Zosma @ X6 ASUS M4A88T-M Sapphire HD 6870 G.SKILL Sniper LV 1600 
Hard DriveOptical DriveCoolingOS
WD Caviar Green 1TB Some LG Thing Hyper 212+ Win 7 Pro x64 
MonitorPowerCase
Samsung 173v Antec 430D Rosewill mATX Cheapie 
  hide details  
Reply
Teatime
(14 items)
 
Epic $620 Build
(11 items)
 
 
CPUMotherboardGraphicsRAM
6700k Z170 Classified OG Titan x2 Trident V 3000 16gb 
Hard DriveCoolingOSMonitor
SM951 512 + 840Pro 256 + others Raystorm, PMP-500, EK-FCTitan x2, 10 fans of rad Win10 Pro x64  Multi ASUS PB278Q / 85Hz 
KeyboardPowerCaseMouse
Maxkeyboards x8 Purple Corsair AX1200i Enthoo Primo SE (Red) Logitech G502 
Mouse PadAudio
Desk TiHD + DT770Pro/250 +LDMkII 
CPUMotherboardGraphicsRAM
Phenom II X4 960T Zosma @ X6 ASUS M4A88T-M Sapphire HD 6870 G.SKILL Sniper LV 1600 
Hard DriveOptical DriveCoolingOS
WD Caviar Green 1TB Some LG Thing Hyper 212+ Win 7 Pro x64 
MonitorPowerCase
Samsung 173v Antec 430D Rosewill mATX Cheapie 
  hide details  
Reply
post #15405 of 33558
Quote:
Originally Posted by FtW 420 View Post

Ivan, just saw this http://www.hwbot.org/newsflash/1978_intel_extreme_overclocking_workshop_in_buenos_aires_argentina_on_april_10

Might make you feel better to see other peoples hardware take a beating if it's close & you have free time.

Yeah, seen it a month ago at that local site...registered there but it's some sort of give away contest thingie. I doubt a new guy will get in.
I never posted in that forum except on the event's thread biggrin.gif
(I don't like local forums normally...people tend to be too selfish/cocky/rude or simply ignorant and a combination of those other perks mentioned before)
Quote:
Originally Posted by Joa3d43 View Post

...or save some travel bucks and watch that crazy dude on YouTube fry old hardware in his drive way - like sending 220v to an AMD CPU, or run things without any heat-sink...I think he must have had a bad childhood experience with computers biggrin.gif

Which guy!?
Quote:
Originally Posted by lilchronic View Post

what kinda timmings should i try for 2600mhz i never tried loosening them when i went for 2600

Quote:
Originally Posted by lilchronic View Post

ok i tried 2600mhz 11-13-13 it faild and i went to 1.7v then i tried 12 -13-13 and it worked @ 1.7 but crashed after i booted in winows so i tried 1.725 it failed instantly so now im @ 2400 with 10-10-12 1.67v

Looks like you won't be able to use more "24/7 friendly" voltages for higher clocks...Try 1.85v and 11-13-12-31-2t and see if that boots with auto subs.
Then open memtweakit and try to tighten the tertiary timings (as far as they'll go...which is normally 1-1-1-1-4-4-1-4-4-0). Try a maxmem run at 5ghz or go for 3ghz tongue.gif (you might wanna bump vccio and vccsa to 1.15v)

EDIT: You might wanna try 9-12-11 or 9-11-10-28-2t too...hynix friendly combinations. xD
post #15406 of 33558
Quote:
Originally Posted by ivanlabrie View Post

Yeah, seen it a month ago at that local site...registered there but it's some sort of give away contest thingie. I doubt a new guy will get in.
I never posted in that forum except on the event's thread biggrin.gif
(I don't like local forums normally...people tend to be too selfish/cocky/rude or simply ignorant and a combination of those other perks mentioned before)
Which guy!?

Looks like you won't be able to use more "24/7 friendly" voltages for higher clocks...Try 1.85v and 11-13-12-31-2t and see if that boots with auto subs.
Then open memtweakit and try to tighten the tertiary timings (as far as they'll go...which is normally 1-1-1-1-4-4-1-4-4-0). Try a maxmem run at 5ghz or go for 3ghz tongue.gif (you might wanna bump vccio and vccsa to 1.15v)

EDIT: You might wanna try 9-12-11 or 9-11-10-28-2t too...hynix friendly combinations. xD
what are safe voltages to run
Daily Rig
(21 items)
 
Bench Setup
(19 items)
 
 
CPUMotherboardGraphicsRAM
5820k 4.7Ghz @ 1.28vcore / 1.88vccin Gigabyte x99 SOC Champion EVGA GTX 1080Ti G.SKILL Trident Z 32GB 3200Mhz CL14 
Hard DriveHard DriveHard DriveHard Drive
2x Intel 520 120Gb SSD in RAID 0  Intel 180Gb 530 SSD OS Drive 2Tb WD HDD  2x Intel 730 SSD 480GB in RAID 0 
CoolingCoolingCoolingCooling
2x HWLabs GTX360 Black Ice in Push Pull EK blocks for CPU / GPU's 6x corsair sp120 2350RPM 6x Ek Vardar 120 F4's 2200rpm  
OSMonitorKeyboardPower
windows 10 XB270HU 2560x1440 - 144Hz - G-sync Razor blackwidow cooler master V1000 
CaseMouseMouse PadAudio
Corsair 780T EVGA TORQ x10 evga mouse pad 2.1 audio / Hyper X cloud II / Sennheiser Gam... 
Other
EK pump / res 
CPUMotherboardGraphicsGraphics
6600k Z170M OC Formula GTX780Ti AMD HD6450 
RAMHard DriveHard DriveHard Drive
Trident Z 3600Mhz cl16 2x8GB 120Gb intel 520 120Gb intel 520 64Gb adata ssd  
Hard DriveOptical DriveCoolingCooling
750Gb WD Black Sony  F1 Gemini CPU Pot Tek - 9 Fat 
CoolingOSMonitorPower
custom loop two 240rad's xp,W7,W8,W10 x-star 2560x1440  Rosewill Quark-650 Platinum / Antec HCP-850 Pla... 
CaseMouseMouse Pad
Dimastech Mini V1.0 black razor abyssus Razor 
  hide details  
Reply
Daily Rig
(21 items)
 
Bench Setup
(19 items)
 
 
CPUMotherboardGraphicsRAM
5820k 4.7Ghz @ 1.28vcore / 1.88vccin Gigabyte x99 SOC Champion EVGA GTX 1080Ti G.SKILL Trident Z 32GB 3200Mhz CL14 
Hard DriveHard DriveHard DriveHard Drive
2x Intel 520 120Gb SSD in RAID 0  Intel 180Gb 530 SSD OS Drive 2Tb WD HDD  2x Intel 730 SSD 480GB in RAID 0 
CoolingCoolingCoolingCooling
2x HWLabs GTX360 Black Ice in Push Pull EK blocks for CPU / GPU's 6x corsair sp120 2350RPM 6x Ek Vardar 120 F4's 2200rpm  
OSMonitorKeyboardPower
windows 10 XB270HU 2560x1440 - 144Hz - G-sync Razor blackwidow cooler master V1000 
CaseMouseMouse PadAudio
Corsair 780T EVGA TORQ x10 evga mouse pad 2.1 audio / Hyper X cloud II / Sennheiser Gam... 
Other
EK pump / res 
CPUMotherboardGraphicsGraphics
6600k Z170M OC Formula GTX780Ti AMD HD6450 
RAMHard DriveHard DriveHard Drive
Trident Z 3600Mhz cl16 2x8GB 120Gb intel 520 120Gb intel 520 64Gb adata ssd  
Hard DriveOptical DriveCoolingCooling
750Gb WD Black Sony  F1 Gemini CPU Pot Tek - 9 Fat 
CoolingOSMonitorPower
custom loop two 240rad's xp,W7,W8,W10 x-star 2560x1440  Rosewill Quark-650 Platinum / Antec HCP-850 Pla... 
CaseMouseMouse Pad
Dimastech Mini V1.0 black razor abyssus Razor 
  hide details  
Reply
post #15407 of 33558
Quote:
Originally Posted by lilchronic View Post

what are safe voltages to run

No voltage is truly safe...I consider 1.75v the max for daily usage. Hynix scales well with voltage and specially with cold.
Try not to go over 1.85v...unless you can get some chilly AC air inside your case. Then go for 1.9v and shoot for 3ghz+
post #15408 of 33558
Quote:
Originally Posted by ivanlabrie View Post


Which guy!?

...just a small selection (check the right column at YouTube for more)...needless to add: Don't try this at home biggrin.gif


http://www.youtube.com/watch?v=TjHOUonZO6U&feature=endscreen

https://www.youtube.com/watch?v=6WvSBwk-tU0

https://www.youtube.com/watch?v=Sw9-aP__lJA
post #15409 of 33558
Quote:
Originally Posted by ivanlabrie View Post

No voltage is truly safe...I consider 1.75v the max for daily usage. Hynix scales well with voltage and specially with cold.
Try not to go over 1.85v...unless you can get some chilly AC air inside your case. Then go for 1.9v and shoot for 3ghz+
yea i should of tried that a couple months ago when it was 28*F at night lol i live in florida its starting to get hot. bye bye cold front hello heat wave tongue.gif
but im bout to try some of those timmings you suggested 9-12-11-28 9-11-10-28-2t sounds good biggrin.gif
Daily Rig
(21 items)
 
Bench Setup
(19 items)
 
 
CPUMotherboardGraphicsRAM
5820k 4.7Ghz @ 1.28vcore / 1.88vccin Gigabyte x99 SOC Champion EVGA GTX 1080Ti G.SKILL Trident Z 32GB 3200Mhz CL14 
Hard DriveHard DriveHard DriveHard Drive
2x Intel 520 120Gb SSD in RAID 0  Intel 180Gb 530 SSD OS Drive 2Tb WD HDD  2x Intel 730 SSD 480GB in RAID 0 
CoolingCoolingCoolingCooling
2x HWLabs GTX360 Black Ice in Push Pull EK blocks for CPU / GPU's 6x corsair sp120 2350RPM 6x Ek Vardar 120 F4's 2200rpm  
OSMonitorKeyboardPower
windows 10 XB270HU 2560x1440 - 144Hz - G-sync Razor blackwidow cooler master V1000 
CaseMouseMouse PadAudio
Corsair 780T EVGA TORQ x10 evga mouse pad 2.1 audio / Hyper X cloud II / Sennheiser Gam... 
Other
EK pump / res 
CPUMotherboardGraphicsGraphics
6600k Z170M OC Formula GTX780Ti AMD HD6450 
RAMHard DriveHard DriveHard Drive
Trident Z 3600Mhz cl16 2x8GB 120Gb intel 520 120Gb intel 520 64Gb adata ssd  
Hard DriveOptical DriveCoolingCooling
750Gb WD Black Sony  F1 Gemini CPU Pot Tek - 9 Fat 
CoolingOSMonitorPower
custom loop two 240rad's xp,W7,W8,W10 x-star 2560x1440  Rosewill Quark-650 Platinum / Antec HCP-850 Pla... 
CaseMouseMouse Pad
Dimastech Mini V1.0 black razor abyssus Razor 
  hide details  
Reply
Daily Rig
(21 items)
 
Bench Setup
(19 items)
 
 
CPUMotherboardGraphicsRAM
5820k 4.7Ghz @ 1.28vcore / 1.88vccin Gigabyte x99 SOC Champion EVGA GTX 1080Ti G.SKILL Trident Z 32GB 3200Mhz CL14 
Hard DriveHard DriveHard DriveHard Drive
2x Intel 520 120Gb SSD in RAID 0  Intel 180Gb 530 SSD OS Drive 2Tb WD HDD  2x Intel 730 SSD 480GB in RAID 0 
CoolingCoolingCoolingCooling
2x HWLabs GTX360 Black Ice in Push Pull EK blocks for CPU / GPU's 6x corsair sp120 2350RPM 6x Ek Vardar 120 F4's 2200rpm  
OSMonitorKeyboardPower
windows 10 XB270HU 2560x1440 - 144Hz - G-sync Razor blackwidow cooler master V1000 
CaseMouseMouse PadAudio
Corsair 780T EVGA TORQ x10 evga mouse pad 2.1 audio / Hyper X cloud II / Sennheiser Gam... 
Other
EK pump / res 
CPUMotherboardGraphicsGraphics
6600k Z170M OC Formula GTX780Ti AMD HD6450 
RAMHard DriveHard DriveHard Drive
Trident Z 3600Mhz cl16 2x8GB 120Gb intel 520 120Gb intel 520 64Gb adata ssd  
Hard DriveOptical DriveCoolingCooling
750Gb WD Black Sony  F1 Gemini CPU Pot Tek - 9 Fat 
CoolingOSMonitorPower
custom loop two 240rad's xp,W7,W8,W10 x-star 2560x1440  Rosewill Quark-650 Platinum / Antec HCP-850 Pla... 
CaseMouseMouse Pad
Dimastech Mini V1.0 black razor abyssus Razor 
  hide details  
Reply
post #15410 of 33558
Hynix works like that...try xmp profile, and change the main timings to that. Work your way around 1.65-75v first.
Memtweakit from within Windows does wonders for secondary/tertiary timings, but remember some of the timings you will achieve are not bootable most of the time. Don't change twcl from Win unless you wanna reboot your pc forcefully. biggrin.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide