Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 1564

post #15631 of 33574
Quote:
Originally Posted by RavageTheEarth View Post

So I measured on the top of my case and I have 70mm before it hits my MOBO, but I have 8-pin and 4-pin power cables connected to power the CPU on the motherboard so that is going to contrain a little more of that space. I could probably bend them back some more. Would I be able to go fanless for the top rad if I go with the Alphacool Nexxos 360 UT30 full copper? I really wish I could put one on the bottom. I could put the pump in the 5.25 area, but then the res would have to be somewhere above the case and I want it in the case. Do you guys think that I definetly need two pumps for this loop even if I'm using the Sidewinder Custom tapped MCP655 / Laing D5 with G 1/4 Threads? I could have one 140 rad on the bottom next to the pump. I'm just confused with all of this haha

On a brighter note my PSU is going to be delivered back to me on monday!!

Id seeif u can get the ut 45s to fit.

You can buy one for the lower area and see if it fits in the top then order the 2nd one wink.gif
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
post #15632 of 33574
Couldn't I put the 60mm UT30 on the top and then add fans above the case? Like this: http://img40.imageshack.us/img40/2581/phantom820withfans.png

Man I really want to learn how to use blender, but I feel like it would be years before I learn how to do work like this^
post #15633 of 33574
Quote:
Originally Posted by RavageTheEarth View Post

Couldn't I put the 60mm UT30 on the top and then add fans above the case? Like this: http://img40.imageshack.us/img40/2581/phantom820withfans.png

Man I really want to learn how to use blender, but I feel like it would be years before I learn how to do work like this^

Yes you could!
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
post #15634 of 33574
My god... scratch EVERYTHING. THIS is what I want. My brain can't comprehend how a freeware program can create and render these models...

http://img708.imageshack.us/img708/4480/phantom820withcables2.png
http://img547.imageshack.us/img547/7910/phantom820withexterior2.png
post #15635 of 33574
Quote:
Originally Posted by Hokies83 View Post

Yes you could!

Awesome well I think that is what I will do then. I would definetly do two loops if it could look like this^

Where would I buy that stiff tubing like that?
post #15636 of 33574
That will work
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
post #15637 of 33574
Quote:
Originally Posted by Hokies83 View Post

That will work

You mean the copper pipes?

You have to bend them..

I do not like them reminds me of my basement ceiling.
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
post #15638 of 33574
Well in the renders they look like transparent blue and white. Not copper. Does a place cell something like that? I definetly don't want to use copper haha. I'll be out in my yard with a conduit bender looking like a nut. I think its ugly too.
post #15639 of 33574
Your asking for headaches and trouble being a frist time water cooler with stiff tubing.

Id try to get the most flexable stuff u can get since this is your first time.
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
post #15640 of 33574
Quote:
Originally Posted by Hokies83 View Post

Your asking for headaches and trouble being a frist time water cooler with stiff tubing.

Id try to get the most flexable stuff u can get since this is your first time.

Yea thats true I can still do something like that with regular tubing. Probably for the best.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide