Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 1570

post #15691 of 33558
Quote:
Originally Posted by stickg1 View Post

Make sure there's no aluminum coming in contact with the CLU.

Thanks for the tip thumb.gif

Quote:
Originally Posted by RavageTheEarth View Post

I have done it on my two 7950's, but I ended up taking it off because I got scared it would eventually short something out so I replaced it with mx4 and still had pretty decent temp drops. CLU dropped temps about 8c and mx4 dropped temps about 5c.

Glad to hear that it makes that much of a diference since Nvidia throttles at 70c. I should have both cards by tomorrow and will replace the grease with mx4 since I have buckets of that laying around biggrin.gif
Captain Crunch
(12 items)
 
  
CPUMotherboardGraphicsGraphics
3770k @ 4.6Ghz Asus Z77 Sabertooth EVGA GeForce GTX 660 Ti FTW+ 3GB w/Backplate (SLI) Waiting For GTX 780  
RAMHard DriveCoolingOS
Samsung 2133Mhz 10-10-10-28 1T OCZ SSD Corsair H100 P/P Windows 7 
MonitorKeyboardPowerCase
Monoprice 2560x1440p Ducky Shine Corsair AX1200 Cooler Master 690 
  hide details  
Reply
Captain Crunch
(12 items)
 
  
CPUMotherboardGraphicsGraphics
3770k @ 4.6Ghz Asus Z77 Sabertooth EVGA GeForce GTX 660 Ti FTW+ 3GB w/Backplate (SLI) Waiting For GTX 780  
RAMHard DriveCoolingOS
Samsung 2133Mhz 10-10-10-28 1T OCZ SSD Corsair H100 P/P Windows 7 
MonitorKeyboardPowerCase
Monoprice 2560x1440p Ducky Shine Corsair AX1200 Cooler Master 690 
  hide details  
Reply
post #15692 of 33558
Thread Starter 
Quote:
Originally Posted by josephimports View Post

OCN name: josephimports
Method: razorless by fnarfbargle
CPU: 3770K
on die-TIM: Coollaboratory Liquid Ultra
ihs-TIM: MX4
Mhz gained: 200
OC after delid: 4800
Temp drops: ~20c
CPU-Z validation of max OC: http://valid.canardpc.com/2756079







While originally intending to do the razor method, i chickened out a few times. The last time managing to clear two corners, but then i scraped the top of the ihs and freaked out. I thought I scratched the pcb. tongue.gif So when I saw the razorless video, I said to myself, that looks way too easy and sure enough, it was. Its this thread/forum that continues to fuel this hobby for me, so thanks everyone. thumb.gif

You're In! thumb.gif Now slap the Sig ona nd be proud of it! tongue.gif
post #15693 of 33558
Quote:
Originally Posted by josephimports View Post

OCN name: josephimports
Method: razorless by fnarfbargle
CPU: 3770K
on die-TIM: Coollaboratory Liquid Ultra
ihs-TIM: MX4
Mhz gained: 200
OC after delid: 4800
Temp drops: ~20c
CPU-Z validation of max OC: http://valid.canardpc.com/2756079







While originally intending to do the razor method, i chickened out a few times. The last time managing to clear two corners, but then i scraped the top of the ihs and freaked out. I thought I scratched the pcb. tongue.gif So when I saw the razorless video, I said to myself, that looks way too easy and sure enough, it was. Its this thread/forum that continues to fuel this hobby for me, so thanks everyone. thumb.gif

Wow, congrats!
You should go and post your success story here:
http://www.overclock.net/t/1376206/how-to-delid-your-ivy-bridge-cpu-with-out-a-razor-blade
post #15694 of 33558
Quote:
Originally Posted by Hokies83 View Post

Yes


Thanks a lot. The pcb on the Sapphire is blue so I hope that doesn't mean that it isn't reference.
post #15695 of 33558
3770k arrives today!

Any advice would be appreciated
I have read alot about these 3770k's burning out in few weeks, I'm not sure if it was just peoples bad luck or something to do with a series of batches manufactured by intel
Should I wait a month running stock to delidd? I now not only am scared of delidding, but delidding so early with a new chip, it burning out and having no RMA
  
Reply
  
Reply
post #15696 of 33558

Quote:
Originally Posted by RavageTheEarth View Post

That is PERFECT. Thank you!
Just wanted to add, that is the tubing I bought and found it is incompatible with Swiftech fittings because what PrimoChill calls 5/8 is not what Swiftech calls 5/8. It is also pretty stiff stuff and nowhere near as easy to bend as the stock tubing on the H220. I am looking for more flexible tubing now to replace the PrimoChill because I have some difficult turns to make in my loop.
Ivy 5.0
(14 items)
 
Ivy 4.8
(15 items)
 
 
CPUMotherboardGraphicsRAM
i7-3770k 5.0 24/7 Maximus V Formula EVGA GTX 690 G.Skill Trident X 2400 (2x8gb) 
Hard DriveOptical DriveCoolingOS
Samsung 840 Pro 512GB Pioneer BD-RW Swiftech H220 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
2 x NEC 30" Logitech G15 Corsair AX1200 NZXT Switch 810 
MouseAudio
Logitech G9x Logitech G51 
  hide details  
Reply
Ivy 5.0
(14 items)
 
Ivy 4.8
(15 items)
 
 
CPUMotherboardGraphicsRAM
i7-3770k 5.0 24/7 Maximus V Formula EVGA GTX 690 G.Skill Trident X 2400 (2x8gb) 
Hard DriveOptical DriveCoolingOS
Samsung 840 Pro 512GB Pioneer BD-RW Swiftech H220 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
2 x NEC 30" Logitech G15 Corsair AX1200 NZXT Switch 810 
MouseAudio
Logitech G9x Logitech G51 
  hide details  
Reply
post #15697 of 33558
Quote:
Originally Posted by INCREDIBLEHULK View Post

3770k arrives today!

Any advice would be appreciated
I have read alot about these 3770k's burning out in few weeks, I'm not sure if it was just peoples bad luck or something to do with a series of batches manufactured by intel
Should I wait a month running stock to delidd? I now not only am scared of delidding, but delidding so early with a new chip, it burning out and having no RMA

Burning out how?

Ive ran 1.54v since Oct 2012.
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
post #15698 of 33558
Quote:
Originally Posted by Desert Rat View Post

Thanks for the tip thumb.gif
Glad to hear that it makes that much of a diference since Nvidia throttles at 70c. I should have both cards by tomorrow and will replace the grease with mx4 since I have buckets of that laying around biggrin.gif

I tried ultra on my 690 and got terrible results because I applied it incorrectly. I bought pro after using all of the ultra and now my gpu never goes above 34c full load (under water). Just make sure you apply it very thinly, I used a q-tip (doesn't have to be included ones) for CLP and it should be the same with ultra. If you want you can also apply it to the gpu block as well as the core, that is what I did and got very good results. If you apply too much then the performance will be bad, but if you apply too little then there won't be contact between the gpu core and the block because both pastes are thin, and you will get terrible results. The first time around I even got ultra on my pcb but nothing happened, if you spread it correctly then it will never drip. Also make sure to NOT move the block when mounting, try to get it as steady as possible, in my experience CLU or CLP don't like to be moved after making contact.
Sold
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-4930k @4.7 Asus Rampage IV Black Edition EVGA GTX 780 Ti @1300/8250 1.21v G.Skill Trident X 4x4GB 2400MHz 9-11-11-31-1 
Hard DriveHard DriveCoolingCooling
Samsung 840 Pro 256GB  Western Digital Red 2TB EK Supremacy CPU Waterblock Acetal+Nickel  EK 780 Ti Waterblock Acetal+Nickel 
CoolingCoolingCoolingCooling
Primochill Advanced LRT White Tubing (2) Hardware Labs Black Ice SR-1 480 Radiator Bitspower Fittings (8) Corsair SP120 Quiet Edition Fans 
CoolingCoolingOSMonitor
EK Laing D5 Pump w/ Acetal Top  EK 250mm Reservoir  Windows 7 x64 ROG SWIFT 
KeyboardPowerCaseMouse
Das Ultimate S Blank Cherry MX Blue  EVGA G2 1300 Case Labs Magnum TH10 Razer Deathadder 2013 
Mouse PadAudio
Razer Goliathus Control Sennheiser HD650  
  hide details  
Reply
Sold
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-4930k @4.7 Asus Rampage IV Black Edition EVGA GTX 780 Ti @1300/8250 1.21v G.Skill Trident X 4x4GB 2400MHz 9-11-11-31-1 
Hard DriveHard DriveCoolingCooling
Samsung 840 Pro 256GB  Western Digital Red 2TB EK Supremacy CPU Waterblock Acetal+Nickel  EK 780 Ti Waterblock Acetal+Nickel 
CoolingCoolingCoolingCooling
Primochill Advanced LRT White Tubing (2) Hardware Labs Black Ice SR-1 480 Radiator Bitspower Fittings (8) Corsair SP120 Quiet Edition Fans 
CoolingCoolingOSMonitor
EK Laing D5 Pump w/ Acetal Top  EK 250mm Reservoir  Windows 7 x64 ROG SWIFT 
KeyboardPowerCaseMouse
Das Ultimate S Blank Cherry MX Blue  EVGA G2 1300 Case Labs Magnum TH10 Razer Deathadder 2013 
Mouse PadAudio
Razer Goliathus Control Sennheiser HD650  
  hide details  
Reply
post #15699 of 33558
Quote:
Originally Posted by INCREDIBLEHULK View Post

3770k arrives today!

Any advice would be appreciated
I have read alot about these 3770k's burning out in few weeks, I'm not sure if it was just peoples bad luck or something to do with a series of batches manufactured by intel
Should I wait a month running stock to delidd? I now not only am scared of delidding, but delidding so early with a new chip, it burning out and having no RMA
ive never heard of them burning out. oh wait there is 1 way. cough... 1.9v ... cough biggrin.gif
Daily Rig
(21 items)
 
Bench Setup
(19 items)
 
 
CPUMotherboardGraphicsRAM
5820k 4.7Ghz @ 1.28vcore / 1.88vccin Gigabyte x99 SOC Champion EVGA GTX 1080Ti G.SKILL Trident Z 32GB 3200Mhz CL14 
Hard DriveHard DriveHard DriveHard Drive
2x Intel 520 120Gb SSD in RAID 0  Intel 180Gb 530 SSD OS Drive 2Tb WD HDD  2x Intel 730 SSD 480GB in RAID 0 
CoolingCoolingCoolingCooling
2x HWLabs GTX360 Black Ice in Push Pull EK blocks for CPU / GPU's 6x corsair sp120 2350RPM 6x Ek Vardar 120 F4's 2200rpm  
OSMonitorKeyboardPower
windows 10 XB270HU 2560x1440 - 144Hz - G-sync Razor blackwidow cooler master V1000 
CaseMouseMouse PadAudio
Corsair 780T EVGA TORQ x10 evga mouse pad 2.1 audio / Hyper X cloud II / Sennheiser Gam... 
Other
EK pump / res 
CPUMotherboardGraphicsGraphics
6600k Z170M OC Formula GTX780Ti AMD HD6450 
RAMHard DriveHard DriveHard Drive
Trident Z 3600Mhz cl16 2x8GB 120Gb intel 520 120Gb intel 520 64Gb adata ssd  
Hard DriveOptical DriveCoolingCooling
750Gb WD Black Sony  F1 Gemini CPU Pot Tek - 9 Fat 
CoolingOSMonitorPower
custom loop two 240rad's xp,W7,W8,W10 x-star 2560x1440  Rosewill Quark-650 Platinum / Antec HCP-850 Pla... 
CaseMouseMouse Pad
Dimastech Mini V1.0 black razor abyssus Razor 
  hide details  
Reply
Daily Rig
(21 items)
 
Bench Setup
(19 items)
 
 
CPUMotherboardGraphicsRAM
5820k 4.7Ghz @ 1.28vcore / 1.88vccin Gigabyte x99 SOC Champion EVGA GTX 1080Ti G.SKILL Trident Z 32GB 3200Mhz CL14 
Hard DriveHard DriveHard DriveHard Drive
2x Intel 520 120Gb SSD in RAID 0  Intel 180Gb 530 SSD OS Drive 2Tb WD HDD  2x Intel 730 SSD 480GB in RAID 0 
CoolingCoolingCoolingCooling
2x HWLabs GTX360 Black Ice in Push Pull EK blocks for CPU / GPU's 6x corsair sp120 2350RPM 6x Ek Vardar 120 F4's 2200rpm  
OSMonitorKeyboardPower
windows 10 XB270HU 2560x1440 - 144Hz - G-sync Razor blackwidow cooler master V1000 
CaseMouseMouse PadAudio
Corsair 780T EVGA TORQ x10 evga mouse pad 2.1 audio / Hyper X cloud II / Sennheiser Gam... 
Other
EK pump / res 
CPUMotherboardGraphicsGraphics
6600k Z170M OC Formula GTX780Ti AMD HD6450 
RAMHard DriveHard DriveHard Drive
Trident Z 3600Mhz cl16 2x8GB 120Gb intel 520 120Gb intel 520 64Gb adata ssd  
Hard DriveOptical DriveCoolingCooling
750Gb WD Black Sony  F1 Gemini CPU Pot Tek - 9 Fat 
CoolingOSMonitorPower
custom loop two 240rad's xp,W7,W8,W10 x-star 2560x1440  Rosewill Quark-650 Platinum / Antec HCP-850 Pla... 
CaseMouseMouse Pad
Dimastech Mini V1.0 black razor abyssus Razor 
  hide details  
Reply
post #15700 of 33558
Quote:
Originally Posted by lilchronic View Post

ive never heard of them burning out. oh wait there is 1 way. cough... 1.9v ... cough biggrin.gif
Quote:
Originally Posted by Hokies83 View Post

Burning out how?

Ive ran 1.54v since Oct 2012.

Of course tongue.gif If you are implying that intel chips don't just "burn out" that would be ridiculous. People have received DOA chips on top of chips that burn out within weeks

Quickest post I could find
Quote:
Originally Posted by ph4ntom View Post

hi all.

has anyone seen a batch# 3241F405 from Costa Rica i7 3770K just recived it , had a Malay L223B657 that burned on me frown.gif last week
Also, don't want to go digging through the forums but it's there if you want to search


I just want to take precautions, if I get a chip today, delidd tomorrow, dies next week, I can't RMA, it doesn't cost you money and you don't care, that is why im relying on fellow OCN user experiences biggrin.gif
  
Reply
  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide