Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 1593

post #15921 of 33558
Guys i need some help. I Delidded the CPU Sunday and used Noctua NT-H1 on the CPU and the die. I was getting upwards 90C before and after i did it i got 83C in the hottest core but it took 8 hours to reach that number. Today i had Core Temp open just to check how hot the CPU cores get under normal use and for some reason one core was 84C. I Launched Prime 95 and Core #1 and Core #2 hit 80C instantly which before they hit ~ 65C and only into 70s after 10 mins. What surprised me was that core #0 and #3 where both in 60s. Do you guys think that the paste in the die might have slipped off? I have CLP on the way but want to fix this problem first.
Ishimura
(21 items)
 
Silent Knight
(13 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 3770K @ 4.6GHz ASRock Z77E-ITX eVGA GTX 1080 Ti Hybrid AMD Radeon R9 16GB DDR3-2400MHz  
Hard DriveHard DriveCoolingCooling
SanDisk Ultra II 960GB Toshiba X300 5TB Corsair H100i GTX eVGA Hybrid Water Cooler  
CoolingOSMonitorKeyboard
4x GentleTyphoon AP-15 Windows 10 Pro 64-Bit Philips Brilliance BDM4065UC 4K Razer BlackWidow Chroma  
PowerCaseMouseMouse Pad
eVGA SuperNOVA 750 G3 Define Nano S Logitech G502 Proteus Core PECHAM Gaming Mouse Pad XX-Large 
AudioAudioAudioAudio
Audioengine D1 DAC Mackie CR Series CR3 Audio-Technica ATH-M50 Sennheiser HD 598 
Audio
Sony XB950BT 
CPUMotherboardGraphicsRAM
AMD Phenom II X4 955 @ 4.2GHz ASUS M4A79XTD EVO AMD Radeon HD 7970 3GB @ 1200/1500 2x 4GB G.SKILL Ripjaws X DDR3-1600 
Hard DriveHard DriveHard DriveCooling
OCZ Agility 3 60GB WD Caviar Green 1.5TB 2 x Seagate Barracuda 2TB XSPC Raystorm 
CoolingCoolingOSPower
EK-FC7970 XSPC RS360 Windows 10 Pro 64-Bit Corsair TX750 
Case
NZXT Switch 810  
  hide details  
Reply
Ishimura
(21 items)
 
Silent Knight
(13 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 3770K @ 4.6GHz ASRock Z77E-ITX eVGA GTX 1080 Ti Hybrid AMD Radeon R9 16GB DDR3-2400MHz  
Hard DriveHard DriveCoolingCooling
SanDisk Ultra II 960GB Toshiba X300 5TB Corsair H100i GTX eVGA Hybrid Water Cooler  
CoolingOSMonitorKeyboard
4x GentleTyphoon AP-15 Windows 10 Pro 64-Bit Philips Brilliance BDM4065UC 4K Razer BlackWidow Chroma  
PowerCaseMouseMouse Pad
eVGA SuperNOVA 750 G3 Define Nano S Logitech G502 Proteus Core PECHAM Gaming Mouse Pad XX-Large 
AudioAudioAudioAudio
Audioengine D1 DAC Mackie CR Series CR3 Audio-Technica ATH-M50 Sennheiser HD 598 
Audio
Sony XB950BT 
CPUMotherboardGraphicsRAM
AMD Phenom II X4 955 @ 4.2GHz ASUS M4A79XTD EVO AMD Radeon HD 7970 3GB @ 1200/1500 2x 4GB G.SKILL Ripjaws X DDR3-1600 
Hard DriveHard DriveHard DriveCooling
OCZ Agility 3 60GB WD Caviar Green 1.5TB 2 x Seagate Barracuda 2TB XSPC Raystorm 
CoolingCoolingOSPower
EK-FC7970 XSPC RS360 Windows 10 Pro 64-Bit Corsair TX750 
Case
NZXT Switch 810  
  hide details  
Reply
post #15922 of 33558
Man what a crappy week
Edited by stickg1 - 4/4/13 at 5:28pm
post #15923 of 33558
I bought a i7 3770 recently and i plan to put it on water but I would never attempt the stuff you guys are talking about here. No
post #15924 of 33558
Quote:
Originally Posted by tinmann View Post

I bought a i7 3770 recently and i plan to put it on water but I would never attempt the stuff you guys are talking about here. No

Y?
Quote:
Originally Posted by ZealotKi11er View Post

Guys i need some help. I Delidded the CPU Sunday and used Noctua NT-H1 on the CPU and the die. I was getting upwards 90C before and after i did it i got 83C in the hottest core but it took 8 hours to reach that number. Today i had Core Temp open just to check how hot the CPU cores get under normal use and for some reason one core was 84C. I Launched Prime 95 and Core #1 and Core #2 hit 80C instantly which before they hit ~ 65C and only into 70s after 10 mins. What surprised me was that core #0 and #3 where both in 60s. Do you guys think that the paste in the die might have slipped off? I have CLP on the way but want to fix this problem first.

Could be to much tim... Also the clamp could have made the IHS slide down.

Id just live with it till the CLU gets there.

And just remember EXTREME thin layer on die and EXTREME thin layer on back side of IHS.

Stuff goes a Mile.. Use a Q tip and work it.




Edited by Hokies83 - 4/4/13 at 5:25pm
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
post #15925 of 33558
Quote:
Originally Posted by Hokies83 View Post

Lol Pm sent lilchronic G1 Sniper 3 for 185$.
Quote:
Originally Posted by Hokies83 View Post

Lol Pm sent lilchronic G1 Sniper 3 for 185$.

Sniper is an awesome board.. Can't use it myself though since I have 7970 vapor-x in crossfire and I need triple slot space.

Did I mention I finally tried to overclock my ram last night. It is at 2000mhz 9-10-9-27-1T @ 1.65v right now. This is the corsair low profile ram ddr3 1600mhz 9-9-9-24-2T @ 1.5v overclocked. My 3dmark11 physics score went from 9100 to 9850 smile.gif So I guess there isn't much need to buy the cas 10 2400mhz trident x's. I will just run like this for now. I played tomb raider for about 3 hours last night without WHEA errors or freezes. Should I run memtest86+ or not bother with it since I haven't seen WHEA errors yet.
post #15926 of 33558
Quote:
Originally Posted by tinmann View Post

I bought a i7 3770 recently and i plan to put it on water but I would never attempt the stuff you guys are talking about here. No

You're more like the cowardly lion than the tinmann...
post #15927 of 33558
Quote:
Originally Posted by chronicfx View Post


Sniper is an awesome board.. Can't use it myself though since I have 7970 vapor-x in crossfire and I need triple slot space.

Did I mention I finally tried to overclock my ram last night. It is at 2000mhz 9-10-9-27-1T @ 1.65v right now. This is the corsair low profile ram ddr3 1600mhz 9-9-9-24-2T @ 1.5v overclocked. My 3dmark11 physics score went from 9100 to 9850 smile.gif So I guess there isn't much need to buy the cas 10 2400mhz trident x's. I will just run like this for now. I played tomb raider for about 3 hours last night without WHEA errors or freezes. Should I run memtest86+ or not bother with it since I haven't seen WHEA errors yet.

?

Native Sli is pci-e Slot 1 and Slot 3.. so 3 spaces between top and 2nd card wink.gif

As seen here.


CREATOR: gd-jpeg v1.0 (using IJG JPEG v62), default quality
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
post #15928 of 33558
Quote:
Originally Posted by Hokies83 View Post

Y?
Could be to much tim... Also the clamp could have made the IHS slide down.

Id just live with it till the CLU gets there.

And just remember EXTREME thin layer on die and EXTREME thin layer on back side of IHS.

Stuff goes a Mile.. Use a Q tip and work it.




Should i use it in the IHS too or keep using normal thermal paste?

I did not use much at all. Temp where fine when 4 days go.
Ishimura
(21 items)
 
Silent Knight
(13 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 3770K @ 4.6GHz ASRock Z77E-ITX eVGA GTX 1080 Ti Hybrid AMD Radeon R9 16GB DDR3-2400MHz  
Hard DriveHard DriveCoolingCooling
SanDisk Ultra II 960GB Toshiba X300 5TB Corsair H100i GTX eVGA Hybrid Water Cooler  
CoolingOSMonitorKeyboard
4x GentleTyphoon AP-15 Windows 10 Pro 64-Bit Philips Brilliance BDM4065UC 4K Razer BlackWidow Chroma  
PowerCaseMouseMouse Pad
eVGA SuperNOVA 750 G3 Define Nano S Logitech G502 Proteus Core PECHAM Gaming Mouse Pad XX-Large 
AudioAudioAudioAudio
Audioengine D1 DAC Mackie CR Series CR3 Audio-Technica ATH-M50 Sennheiser HD 598 
Audio
Sony XB950BT 
CPUMotherboardGraphicsRAM
AMD Phenom II X4 955 @ 4.2GHz ASUS M4A79XTD EVO AMD Radeon HD 7970 3GB @ 1200/1500 2x 4GB G.SKILL Ripjaws X DDR3-1600 
Hard DriveHard DriveHard DriveCooling
OCZ Agility 3 60GB WD Caviar Green 1.5TB 2 x Seagate Barracuda 2TB XSPC Raystorm 
CoolingCoolingOSPower
EK-FC7970 XSPC RS360 Windows 10 Pro 64-Bit Corsair TX750 
Case
NZXT Switch 810  
  hide details  
Reply
Ishimura
(21 items)
 
Silent Knight
(13 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 3770K @ 4.6GHz ASRock Z77E-ITX eVGA GTX 1080 Ti Hybrid AMD Radeon R9 16GB DDR3-2400MHz  
Hard DriveHard DriveCoolingCooling
SanDisk Ultra II 960GB Toshiba X300 5TB Corsair H100i GTX eVGA Hybrid Water Cooler  
CoolingOSMonitorKeyboard
4x GentleTyphoon AP-15 Windows 10 Pro 64-Bit Philips Brilliance BDM4065UC 4K Razer BlackWidow Chroma  
PowerCaseMouseMouse Pad
eVGA SuperNOVA 750 G3 Define Nano S Logitech G502 Proteus Core PECHAM Gaming Mouse Pad XX-Large 
AudioAudioAudioAudio
Audioengine D1 DAC Mackie CR Series CR3 Audio-Technica ATH-M50 Sennheiser HD 598 
Audio
Sony XB950BT 
CPUMotherboardGraphicsRAM
AMD Phenom II X4 955 @ 4.2GHz ASUS M4A79XTD EVO AMD Radeon HD 7970 3GB @ 1200/1500 2x 4GB G.SKILL Ripjaws X DDR3-1600 
Hard DriveHard DriveHard DriveCooling
OCZ Agility 3 60GB WD Caviar Green 1.5TB 2 x Seagate Barracuda 2TB XSPC Raystorm 
CoolingCoolingOSPower
EK-FC7970 XSPC RS360 Windows 10 Pro 64-Bit Corsair TX750 
Case
NZXT Switch 810  
  hide details  
Reply
post #15929 of 33558
Quote:
Originally Posted by Hokies83 View Post

?

Native Sli is pci-e Slot 1 and Slot 3.. so 3 spaces between top and 2nd card wink.gif

As seen here.


CREATOR: gd-jpeg v1.0 (using IJG JPEG v62), default quality

My bad you are right there is room. I saw a thread where the crossfire bridge would not reach.. Thats what it was.
post #15930 of 33558
Quote:
Originally Posted by ZealotKi11er View Post

Should i use it in the IHS too or keep using normal thermal paste?

I did not use much at all. Temp where fine when 4 days go.

Id leave it off between Heatsink and IHS..

But use it on bottom of IHS between IHS and Die.

Could be pump out?
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide