Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 164

post #1631 of 33574
Thread Starter 
Quote:
Originally Posted by shremi View Post

What do you think is it dead ??????

The bottom is black gunk from the glue that will come off the top looks like a lane was cut but look at the first page I made in this thread it shows an even worse case and that chips is still running. go read that first. As for myself I eould put some black automotive glue over it (just the gold spot so use the smallest amount you can and put your IHS back on and try it and see if it posts if so then it runs fine. thumb.gif

Good Luck sir we are hoping and waiting for good news!!!
post #1632 of 33574
Quote:
Originally Posted by shremi View Post

What do you think is it dead ??????

Bottom 100% no

Top one Maybe id say no it is pretty tiny.. ive seen alot worse.

Kinda looks like you tried to enter the glue with the Blade not Flat.

If dead here is your warranty back..

    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
post #1633 of 33574
Thanks for the quick answers I really tried my best .....

Since this is a chip that I purchased just in case I screwed up I can't test it right now because I need to take apart my loop ...

I'll try it out this weekend and see if it posts...

Btw the die is intact is just a reflection
X99 Hackintosh
(12 items)
 
  
CPUMotherboardGraphicsRAM
i7 5820k @ 4.6 Asus X99 Deluxe Gtx 980's in SLI 32GB Corsair DDR4 @ 3000 
Hard DriveHard DriveCoolingMonitor
SanDisk Extreme PRO 480GB Samsung 830 Pro with OSX Custom Loop  Dell Ultrawide U3415W 
KeyboardPowerCaseMouse
Logitech G710 Evga G1300 Phanteks Enthoo Primo Logitech G502 
  hide details  
Reply
X99 Hackintosh
(12 items)
 
  
CPUMotherboardGraphicsRAM
i7 5820k @ 4.6 Asus X99 Deluxe Gtx 980's in SLI 32GB Corsair DDR4 @ 3000 
Hard DriveHard DriveCoolingMonitor
SanDisk Extreme PRO 480GB Samsung 830 Pro with OSX Custom Loop  Dell Ultrawide U3415W 
KeyboardPowerCaseMouse
Logitech G710 Evga G1300 Phanteks Enthoo Primo Logitech G502 
  hide details  
Reply
post #1634 of 33574
Glad my black adhesive tip is causing people exploit Intel. tongue.gif Give them dead chips because they messed with us! tongue.gif They should know how anal we get with temps. grouphug.gif
Swag's Venus
(18 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k @ 4.8GHz Asus Maximus V Gene EVGA GTX 680 G.Skill RipJaws X 16GB (2x8GB) 
Hard DriveHard DriveCoolingOS
Samsung 830 Crucial M4 Corsair H100i Windows 7 
MonitorMonitorKeyboardPower
Dell U2713HM Crossover 27Q (3x) Ducky TKL OCN-Version Corsair AX650 
CaseMouseMouse PadAudio
Corsair C70 (Military Green) Razer DeathAdder BE Steelseries QCK+ Beats Pro 
AudioAudio
Bose Surround Sound 5.1 Beats Tours 
  hide details  
Reply
Swag's Venus
(18 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k @ 4.8GHz Asus Maximus V Gene EVGA GTX 680 G.Skill RipJaws X 16GB (2x8GB) 
Hard DriveHard DriveCoolingOS
Samsung 830 Crucial M4 Corsair H100i Windows 7 
MonitorMonitorKeyboardPower
Dell U2713HM Crossover 27Q (3x) Ducky TKL OCN-Version Corsair AX650 
CaseMouseMouse PadAudio
Corsair C70 (Military Green) Razer DeathAdder BE Steelseries QCK+ Beats Pro 
AudioAudio
Bose Surround Sound 5.1 Beats Tours 
  hide details  
Reply
post #1635 of 33574
Just got done tweaking my delidded 3570k NO IHS mount.

I added Fujipoly Extreme .5 mm in thickness around the die.

3570kbarewithLPnFujipolyextremeonPCB.jpg

DT SNIPER nice and snug.

DTSNIPERSIDEDirECTDiEmOUNT3570k.jpg

Added some lock washers to my bolts on the fron side of the mother board to keep my DT SNIPEr mount bolts nice and firm when I put it back in the case. Also I am using a EK S115X TRUE back plate which works out great for this mount.

EKS155TRUEbackplateDTSNIPER.jpg


Still haven't booted. Once I get my loop back together I will see if it boots. I tried the Fujiploy Extreme last week with 1 mm thickness and the CPU would not post. So hopefully .5mm thickness on the sides will work out better.
B.K.T.
(24 items)
 
  
CPUMotherboardGraphicsGraphics
De-Lidded direct die mount Intel i7-4790k No IHS ASUS Z97 WS Sapphire HD7950 OC 950mhz Edition Sapphire HD7950 Vapor X 
RAMHard DriveHard DriveHard Drive
GSkill 2400mhz CL9  Samsung 840 caviar black Hitachi 
Hard DriveOptical DriveCoolingCooling
OCZ AGILITY 4 LG 16x BD burner DT Sniper CPU block Watercool HEATKILLER® GPU-X³ 79X0 Ni-Bl  
CoolingCoolingCoolingOS
Swiftech pump 655 Alphacool NexXxos UT 60 420mm 3x140mm Bgears 1800 RPM fans in pull on radiator Windows 7 Pro 64bit 
MonitorKeyboardPowerCase
BenQ XL2410T SS 6gv2 Seasonic Platinum 860 Silverstone Raven RV02-BW 
MouseMouseMouse PadAudio
Steel Series sensei Steel Series sensei SS Experience I-2, SS 9HD Audio Technica ATH-AD900 
  hide details  
Reply
B.K.T.
(24 items)
 
  
CPUMotherboardGraphicsGraphics
De-Lidded direct die mount Intel i7-4790k No IHS ASUS Z97 WS Sapphire HD7950 OC 950mhz Edition Sapphire HD7950 Vapor X 
RAMHard DriveHard DriveHard Drive
GSkill 2400mhz CL9  Samsung 840 caviar black Hitachi 
Hard DriveOptical DriveCoolingCooling
OCZ AGILITY 4 LG 16x BD burner DT Sniper CPU block Watercool HEATKILLER® GPU-X³ 79X0 Ni-Bl  
CoolingCoolingCoolingOS
Swiftech pump 655 Alphacool NexXxos UT 60 420mm 3x140mm Bgears 1800 RPM fans in pull on radiator Windows 7 Pro 64bit 
MonitorKeyboardPowerCase
BenQ XL2410T SS 6gv2 Seasonic Platinum 860 Silverstone Raven RV02-BW 
MouseMouseMouse PadAudio
Steel Series sensei Steel Series sensei SS Experience I-2, SS 9HD Audio Technica ATH-AD900 
  hide details  
Reply
post #1636 of 33574
Quote:
Originally Posted by Hokies83 View Post

I donno he was - 19 c and it did not freeze lol.

That IS fake, but check ocn, a guy put his h80 rad in ice water. Works good!
Quote:
Originally Posted by Valgaur View Post

That video of 40 fan h100 is fake!? biggrin.gif
I want to get some dry ice and see what i could do....but I'm curious what temps the liquid in the h100's freeze at.

Dry ice will go -78c and freeze it. Cold air won't help really...submerge rad in salty ice water.
Quote:
Originally Posted by SonDa5 View Post

Just got done tweaking my delidded 3570k NO IHS mount.
I added Fujipoly Extreme .5 mm in thickness around the die.
3570kbarewithLPnFujipolyextremeonPCB.jpg
DT SNIPER nice and snug.
DTSNIPERSIDEDirECTDiEmOUNT3570k.jpg
Added some lock washers to my bolts on the fron side of the mother board to keep my DT SNIPEr mount bolts nice and firm when I put it back in the case. Also I am using a EK S115X TRUE back plate which works out great for this mount.
EKS155TRUEbackplateDTSNIPER.jpg
Still haven't booted. Once I get my loop back together I will see if it boots. I tried the Fujiploy Extreme last week with 1 mm thickness and the CPU would not post. So hopefully .5mm thickness on the sides will work out better.

Lookin good! You plan on being the coolest guy around? Good luck wink.gif
post #1637 of 33574
Club made official. Keep up the good work Valgaur and everyone else participating in this thread. thumb.gif
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #1638 of 33574
Thread Starter 
Quote:
Originally Posted by munaim1 View Post

Club made official. Keep up the good work Valgaur and everyone else participating in this thread. thumb.gif
Yes finally! Took a while to read I bet! rolleyes.gif
post #1639 of 33574
Just ordered my new HSF, the Phanteks PH-TC14PE in red, I wanted the blue but its almost £30 more expensive!!! ah well looks like a got a good deal on the red as its at the lowest price its ever been at £57. Can't wait to receive it and get meesin with some real clocks on this lid-flippin cpu!
post #1640 of 33574
Quote:
Originally Posted by munaim1 View Post

Club made official. Keep up the good work Valgaur and everyone else participating in this thread. thumb.gif

Awesome! thanks.. thumb.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide