Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 1642

post #16411 of 33641
Quote:
Originally Posted by Qlix View Post

I dont have a Micro Center in my state. There isnt a Micro Center within 10 hours drive. If you read BBs "low price guarantee" it states any local competitor or qualifying online retailer. "Qualifying" is pretty much at the discretion of the store. From what i gathered from my talks with the manager... most BBs will honor MC's prices, as well as neweggs and Frys
well the only way to see if this will work is to try ourselves. biggrin.gif
Daily Rig
(21 items)
 
Bench Setup
(19 items)
 
 
CPUMotherboardGraphicsRAM
5820k 4.7Ghz @ 1.28vcore / 1.88vccin Gigabyte x99 SOC Champion EVGA GTX 1080Ti G.SKILL Trident Z 32GB 3200Mhz CL14 
Hard DriveHard DriveHard DriveHard Drive
2x Intel 520 120Gb SSD in RAID 0  Intel 180Gb 530 SSD OS Drive 2Tb WD HDD  2x Intel 730 SSD 480GB in RAID 0 
CoolingCoolingCoolingCooling
2x HWLabs GTX360 Black Ice in Push Pull EK blocks for CPU / GPU's 6x corsair sp120 2350RPM 6x Ek Vardar 120 F4's 2200rpm  
OSMonitorKeyboardPower
windows 10 XB270HU 2560x1440 - 144Hz - G-sync Razor blackwidow cooler master V1000 
CaseMouseMouse PadAudio
Corsair 780T EVGA TORQ x10 evga mouse pad 2.1 audio / Hyper X cloud II / Sennheiser Gam... 
Other
EK pump / res 
CPUMotherboardGraphicsGraphics
6600k Z170M OC Formula GTX780Ti AMD HD6450 
RAMHard DriveHard DriveHard Drive
Trident Z 3600Mhz cl16 2x8GB 120Gb intel 520 120Gb intel 520 64Gb adata ssd  
Hard DriveOptical DriveCoolingCooling
750Gb WD Black Sony  F1 Gemini CPU Pot Tek - 9 Fat 
CoolingOSMonitorPower
custom loop two 240rad's xp,W7,W8,W10 x-star 2560x1440  Rosewill Quark-650 Platinum / Antec HCP-850 Pla... 
CaseMouseMouse Pad
Dimastech Mini V1.0 black razor abyssus Razor 
  hide details  
Reply
Daily Rig
(21 items)
 
Bench Setup
(19 items)
 
 
CPUMotherboardGraphicsRAM
5820k 4.7Ghz @ 1.28vcore / 1.88vccin Gigabyte x99 SOC Champion EVGA GTX 1080Ti G.SKILL Trident Z 32GB 3200Mhz CL14 
Hard DriveHard DriveHard DriveHard Drive
2x Intel 520 120Gb SSD in RAID 0  Intel 180Gb 530 SSD OS Drive 2Tb WD HDD  2x Intel 730 SSD 480GB in RAID 0 
CoolingCoolingCoolingCooling
2x HWLabs GTX360 Black Ice in Push Pull EK blocks for CPU / GPU's 6x corsair sp120 2350RPM 6x Ek Vardar 120 F4's 2200rpm  
OSMonitorKeyboardPower
windows 10 XB270HU 2560x1440 - 144Hz - G-sync Razor blackwidow cooler master V1000 
CaseMouseMouse PadAudio
Corsair 780T EVGA TORQ x10 evga mouse pad 2.1 audio / Hyper X cloud II / Sennheiser Gam... 
Other
EK pump / res 
CPUMotherboardGraphicsGraphics
6600k Z170M OC Formula GTX780Ti AMD HD6450 
RAMHard DriveHard DriveHard Drive
Trident Z 3600Mhz cl16 2x8GB 120Gb intel 520 120Gb intel 520 64Gb adata ssd  
Hard DriveOptical DriveCoolingCooling
750Gb WD Black Sony  F1 Gemini CPU Pot Tek - 9 Fat 
CoolingOSMonitorPower
custom loop two 240rad's xp,W7,W8,W10 x-star 2560x1440  Rosewill Quark-650 Platinum / Antec HCP-850 Pla... 
CaseMouseMouse Pad
Dimastech Mini V1.0 black razor abyssus Razor 
  hide details  
Reply
post #16412 of 33641
Lucky for me I pay less for my processors than MC charges, even without tax thumb.gif

I had to google where the nearest best buy is from me, because I haven't needed one in years...which probably isn't a good sign for them. Unsurprisingly the google reviews are unanimously bad.
post #16413 of 33641
Thread Starter 
Enough, sheesh..... tongue.gif

Lets talk about..... Wood thumb.gif
post #16414 of 33641
Quote:
Originally Posted by Valgaur View Post

Enough, sheesh..... tongue.gif

Lets talk about..... Wood thumb.gif

...you tell'em ! Otherwise, I chime in about buying that 3970X last week...definitely not at Microcenter...and definitely not $229 rolleyes.gif but, I also hear that prices for certain types of wood are going up biggrin.gif
post #16415 of 33641
Hi guys, yesterday I have delidded my 3570 k but unfortunately I scratches the pcb. Just a minor scratches and the copper seems to be exposed. Now the closest 2 memory slot to the CPU is not working whenever I tried to put a ram on it and it shows error 55. I have read in the forum that one of the possibilities is that I have damaged the imc but I saw someone with greater scratches than mine but working fine. Another thing is that could it be due to the seating of my nh-d14? I have tighten the screw till it no longer turns. Have I done sth wrong here and should I reseat my noctua? If yes could someone pls guide me on how to reseat it ? Thanks
Corsair
(11 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5 3570K MSI Z77A GD65 MSI GTX670 Power Edition Corsair Vengeance LP 
Hard DriveHard DriveHard DriveCooling
Crucial M4 Samsung F3 WD Blue Noctua NH D14 
MonitorCaseMouse
Dell U2313HM Corsair 500R Razer Deathadder 
  hide details  
Reply
Corsair
(11 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5 3570K MSI Z77A GD65 MSI GTX670 Power Edition Corsair Vengeance LP 
Hard DriveHard DriveHard DriveCooling
Crucial M4 Samsung F3 WD Blue Noctua NH D14 
MonitorCaseMouse
Dell U2313HM Corsair 500R Razer Deathadder 
  hide details  
Reply
post #16416 of 33641
Quote:
Originally Posted by codenamew View Post

Hi guys, yesterday I have delidded my 3570 k but unfortunately I scratches the pcb. Just a minor scratches and the copper seems to be exposed. Now the closest 2 memory slot to the CPU is not working whenever I tried to put a ram on it and it shows error 55. I have read in the forum that one of the possibilities is that I have damaged the imc but I saw someone with greater scratches than mine but working fine. Another thing is that could it be due to the seating of my nh-d14? I have tighten the screw till it no longer turns. Have I done sth wrong here and should I reseat my noctua? If yes could someone pls guide me on how to reseat it ? Thanks

Cmos reset OK. That was what Gigabyte wrote down when I RMA-ed my board for code 55, even though the socket pins and cpu were fine.

Board came back working so maybe it was just a cmos reset that fixed it (I can't remember if I tried that or not before RMA-ing it).
post #16417 of 33641
Quote:
Originally Posted by codenamew View Post

Hi guys, yesterday I have delidded my 3570 k but unfortunately I scratches the pcb. Just a minor scratches and the copper seems to be exposed. Now the closest 2 memory slot to the CPU is not working whenever I tried to put a ram on it and it shows error 55. I have read in the forum that one of the possibilities is that I have damaged the imc but I saw someone with greater scratches than mine but working fine. Another thing is that could it be due to the seating of my nh-d14? I have tighten the screw till it no longer turns. Have I done sth wrong here and should I reseat my noctua? If yes could someone pls guide me on how to reseat it ? Thanks

It depends where you scratched the pcb, some scratches are not as bad as others, yours is probably in the middle of how badly it is damaged. There are some guides on how to fix it but it might not work, or destroy it completely. Check if your motherboard is bending due to the cooler pressure, it could very much cause that. I would reseat it just to make sure. Good luck
Sold
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-4930k @4.7 Asus Rampage IV Black Edition EVGA GTX 780 Ti @1300/8250 1.21v G.Skill Trident X 4x4GB 2400MHz 9-11-11-31-1 
Hard DriveHard DriveCoolingCooling
Samsung 840 Pro 256GB  Western Digital Red 2TB EK Supremacy CPU Waterblock Acetal+Nickel  EK 780 Ti Waterblock Acetal+Nickel 
CoolingCoolingCoolingCooling
Primochill Advanced LRT White Tubing (2) Hardware Labs Black Ice SR-1 480 Radiator Bitspower Fittings (8) Corsair SP120 Quiet Edition Fans 
CoolingCoolingOSMonitor
EK Laing D5 Pump w/ Acetal Top  EK 250mm Reservoir  Windows 7 x64 ROG SWIFT 
KeyboardPowerCaseMouse
Das Ultimate S Blank Cherry MX Blue  EVGA G2 1300 Case Labs Magnum TH10 Razer Deathadder 2013 
Mouse PadAudio
Razer Goliathus Control Sennheiser HD650  
  hide details  
Reply
Sold
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-4930k @4.7 Asus Rampage IV Black Edition EVGA GTX 780 Ti @1300/8250 1.21v G.Skill Trident X 4x4GB 2400MHz 9-11-11-31-1 
Hard DriveHard DriveCoolingCooling
Samsung 840 Pro 256GB  Western Digital Red 2TB EK Supremacy CPU Waterblock Acetal+Nickel  EK 780 Ti Waterblock Acetal+Nickel 
CoolingCoolingCoolingCooling
Primochill Advanced LRT White Tubing (2) Hardware Labs Black Ice SR-1 480 Radiator Bitspower Fittings (8) Corsair SP120 Quiet Edition Fans 
CoolingCoolingOSMonitor
EK Laing D5 Pump w/ Acetal Top  EK 250mm Reservoir  Windows 7 x64 ROG SWIFT 
KeyboardPowerCaseMouse
Das Ultimate S Blank Cherry MX Blue  EVGA G2 1300 Case Labs Magnum TH10 Razer Deathadder 2013 
Mouse PadAudio
Razer Goliathus Control Sennheiser HD650  
  hide details  
Reply
post #16418 of 33641
@ codenamew
Quote:
Originally Posted by Arm3nian View Post

It depends where you scratched the pcb, some scratches are not as bad as others, yours is probably in the middle of how badly it is damaged. There are some guides on how to fix it but it might not work, or destroy it completely. Check if your motherboard is bending due to the cooler pressure, it could very much cause that. I would reseat it just to make sure. Good luck

...in addition to the comments above re re-seating and so forth, you can try either MX4 or even nail polish directly on the scratch - anything to insulate the exposed copper / scratch that is usually close to the IHS
post #16419 of 33641
Quote:
Originally Posted by Qlix View Post

seriously... go to best buy. They sell 3770k online, BUT the STORE will order items for you and price match. I took my phone, showed the microcenter price to the store manager, he ordered the 3770K from their online store, price matched it to $229 and shipped it to my house. 0 reason to drive anywhere but to Best Buy

Quote:
Originally Posted by ivanlabrie View Post

Best buy sounds like a good idea, for people far from MC. thumb.gif

Quote:
Originally Posted by Qlix View Post

Seriously: youve seen me raving about BB stuffs over @ OCF (Im Rugscrubber). Dont know why anyone wouldnt do that if youre in the US.

You serious? I'm always in Best Buy, haggling, complaining, trying to buy display models for cheap. There's only one guy that will work with me, the others are all drones. But "Tom", (I think that's his name) is a decent dude. He got me this monitor for 15% off. But sometimes Best Buy has some crazy clearance sales in the PC components sections. I've bought 2 Kuhler 620's there for $40 each, 6 tubes of Antec Formula 7 for $6.50 a tube, 3 BNIB PNY GTX 560ti OCs for $125 each, and 2 EVGA GTX560 2GB's for $108 each.

But yeah, I think I'm going to go for a 3770K.
Edited by stickg1 - 4/8/13 at 4:05am
post #16420 of 33641
I've just reapplied TIM and there are improvements smile.gif The maximum temperature has dropped by 1°C, and the difference between hottest and coldest cores has dropped to 6-7°C. There could be room for further improvement even with MX-4, but I'm not complaining tongue.gif
Edited by Scott1541 - 4/8/13 at 5:52am
     
CPUMotherboardGraphicsRAM
i5-4278U @ 2.6GHz Apple Logic Board Intel Iris 5100 8GB 1600MHz DDR3L 
Hard DriveOSOSMonitor
128GB SSD Mac OS X 10.11 El Capitan Windows 10 13" IPS @ 2560 x 1600 
KeyboardPowerCaseMouse
Apple British Keyboard 60W Magsafe 2 Apple Aluminium Unibody Apple Trackpad 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
i5-4278U @ 2.6GHz Apple Logic Board Intel Iris 5100 8GB 1600MHz DDR3L 
Hard DriveOSOSMonitor
128GB SSD Mac OS X 10.11 El Capitan Windows 10 13" IPS @ 2560 x 1600 
KeyboardPowerCaseMouse
Apple British Keyboard 60W Magsafe 2 Apple Aluminium Unibody Apple Trackpad 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide