Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 1721

post #17201 of 33576
Quote:
Originally Posted by KuuFA View Post

Well first you have to remove all the plastic on the board. I.E. the pci-e slots and everything plastic.

and i think the temp is like 250f?

Quote:
Originally Posted by lilchronic View Post

well i just watched this but i didnt work for him


edit: i love the top comment

Quote:
Originally Posted by stickg1 View Post

Oh it's Linus, I thought I recognized that voice. I tried to bake a 9600GT the other day and it didn't work. I don't think it was the way to solve the problem though. I got it on CL for $10 and it worked for like 2 days, lol.

Quick words of wisdom: Don't bake. Cover the entire card with tin foil film thingie and only expose the ram chips and gpu core.
Then proceed to point a heat gun from 10cm away to the core for 1 minute, then each pair of adjacent ram chips for 30 sec and finally go back to the core for 30 sec more. That should reflow the bga solder joints to make proper electrical contact with the chips. Let it cool down for 30 min and then re attach the plastic stuff and fire it!
post #17202 of 33576
Quote:
Originally Posted by chris68 View Post

I have vengeance 1600 and I use 9-11-11-28 with 1.6 Volts for 1800 and it works absolutely fine super stable.
By the way I delidded my CPU before a couple of hours (used the new hammer method lol!, operation was a breeze only a couple of minutes) and test it with Intel Burn Test at maximum settings and it run perfecly cool compared with before thumb.gif
Now it's 68-70 C at full load and before delidding 98 C!!! A gain of almost 30 degrees.
My i7 3770K runs at 4.5 Ghz

I'll try that, thanks. What is the command rate that you used? Congrats on the delid BTW
post #17203 of 33576
What's your steam id bro?
I'll add you tomorrow
Mine is Totally Dubbed
post #17204 of 33576
what's Steam..? tongue.gif
post #17205 of 33576
Think my Steam ID is Hokies1983
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
post #17206 of 33576
I'll add you tomorrow. I'm currently in bed, listening to music and not being able to sleep.
post #17207 of 33576
Mine is ivanlabrie, but I'm not using any steam game atm...Just SWTOR, Tera online and Ragnarok Online 1 biggrin.gif
post #17208 of 33576
Quote:
Originally Posted by Totally Dubbed View Post

Mine is Totally Dubbed
Quote:
Originally Posted by Hokies83 View Post

Think my Steam ID is Hokies1983
Quote:
Originally Posted by ivanlabrie View Post

Mine is ivanlabrie

I would have NEVER guessed those steamed id's.
Sold
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-4930k @4.7 Asus Rampage IV Black Edition EVGA GTX 780 Ti @1300/8250 1.21v G.Skill Trident X 4x4GB 2400MHz 9-11-11-31-1 
Hard DriveHard DriveCoolingCooling
Samsung 840 Pro 256GB  Western Digital Red 2TB EK Supremacy CPU Waterblock Acetal+Nickel  EK 780 Ti Waterblock Acetal+Nickel 
CoolingCoolingCoolingCooling
Primochill Advanced LRT White Tubing (2) Hardware Labs Black Ice SR-1 480 Radiator Bitspower Fittings (8) Corsair SP120 Quiet Edition Fans 
CoolingCoolingOSMonitor
EK Laing D5 Pump w/ Acetal Top  EK 250mm Reservoir  Windows 7 x64 ROG SWIFT 
KeyboardPowerCaseMouse
Das Ultimate S Blank Cherry MX Blue  EVGA G2 1300 Case Labs Magnum TH10 Razer Deathadder 2013 
Mouse PadAudio
Razer Goliathus Control Sennheiser HD650  
  hide details  
Reply
Sold
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-4930k @4.7 Asus Rampage IV Black Edition EVGA GTX 780 Ti @1300/8250 1.21v G.Skill Trident X 4x4GB 2400MHz 9-11-11-31-1 
Hard DriveHard DriveCoolingCooling
Samsung 840 Pro 256GB  Western Digital Red 2TB EK Supremacy CPU Waterblock Acetal+Nickel  EK 780 Ti Waterblock Acetal+Nickel 
CoolingCoolingCoolingCooling
Primochill Advanced LRT White Tubing (2) Hardware Labs Black Ice SR-1 480 Radiator Bitspower Fittings (8) Corsair SP120 Quiet Edition Fans 
CoolingCoolingOSMonitor
EK Laing D5 Pump w/ Acetal Top  EK 250mm Reservoir  Windows 7 x64 ROG SWIFT 
KeyboardPowerCaseMouse
Das Ultimate S Blank Cherry MX Blue  EVGA G2 1300 Case Labs Magnum TH10 Razer Deathadder 2013 
Mouse PadAudio
Razer Goliathus Control Sennheiser HD650  
  hide details  
Reply
post #17209 of 33576
Is it bad that I don't even remember what my Steam ID is? Autologon spoils me.
post #17210 of 33576
Quote:
Originally Posted by plu2 View Post

Hmm... I am having an EK Supremacy nickel plated block along with the EK PreciseMount on the way right now and am planning to use the CLU.
With this I have a few options:
  1. Use the CLU on the naked die along with the PreciseMount
  2. Use the CLU between the die and the IHS and then use Gelid GC Extreme between the IHS and the block to protect the block from the CLU.
  3. Use the CLU between the die and the IHS and between the IHS and the block.

I would like to get the most out of delidding the CPU but I am also a bit concerned about damaging the block with the CLU...
Any suggestions?

Quote:
Originally Posted by ivanlabrie View Post

I'd stick to the regular ihs in place mount with the retention mechanism and use CLU on die, and Gelid on the ihs. Also, don't spend money on that EK retention thing for direct die, it's money wasted.

Would you care to elaborate on why EK PreciseMount is a waste of money?

Does anybody else in here have experience with this PreciseMount on a naked Ivy?
plu29um
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3770K ASUS P8Z77-V Deluxe Gigabyte GTX Titan Kingston HyperX Predator Beast 
Hard DriveHard DriveOptical DriveCooling
Samsung 840 Pro WD Caviar Green ASUS DRW 24B5ST DVD±RW Custom liquid cooled loop 
OSMonitorKeyboardPower
Windows 8 Pro Asus pb278q Logitech dinovo edge Seasonic X-850 80 plus GOLD 
CaseMouse
Fractal Design Define XL R2 Steelseries Call of Duty Black Ops II Gaming Mouse 
  hide details  
Reply
plu29um
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3770K ASUS P8Z77-V Deluxe Gigabyte GTX Titan Kingston HyperX Predator Beast 
Hard DriveHard DriveOptical DriveCooling
Samsung 840 Pro WD Caviar Green ASUS DRW 24B5ST DVD±RW Custom liquid cooled loop 
OSMonitorKeyboardPower
Windows 8 Pro Asus pb278q Logitech dinovo edge Seasonic X-850 80 plus GOLD 
CaseMouse
Fractal Design Define XL R2 Steelseries Call of Duty Black Ops II Gaming Mouse 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide