Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 1755

post #17541 of 33558
Quote:
Originally Posted by couchasault9001 View Post

quick question.

i'm at 4.6ghz on 1.31v. i can't get any multi above 46 stable. i've ran my voltage up to 1.38. anything above that becomes unstable again, but i still can't get any multi's to run above 46. llc didn't get me anywhere either. tried clearing cmos, i have the latest bios.

hottest core on 1.38v @ 4.6ghz id 64c after 10 hours of p95.

chip or mobo?

Had a chip that was similar to this. Had to throw a ton of voltage to get past 4.5 Ghz. That chip now belongs to AVADirect, who apparently buy used processors for their builds.
post #17542 of 33558
Quote:
Originally Posted by lilchronic View Post

im bout to get the h220 with the rad on the top then fit two of these rads next to each other on the front of my case with some delta fans.
then after that ill get some water blocks for my 670's thumb.gif

http://www.frozencpu.com/products/7142/ex-rad-128/Black_Ice_GTX_Xtreme_M184_Radiator_-_Black.html?tl=g30c95s759#blank
http://www.sidewindercomputers.com/de92ffhisp.html
Quote:
Originally Posted by RavageTheEarth View Post

I'm going to use this to mount the external 480 monsta thumb.gif

Koolance Radiator Mounting Bracket with Quick-Release - $45
http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=59_457_335_982&products_id=25631

...had an externally mounted rad on a previous build - worked great, also re lower temps... BUT now going completely case-less - gives a whole new meaning to 'thinking outside the box' - what freedom ! thumb.gif

...little choice anyways...what with two mobos in one combined build and 900mm x 60 mm rads in total. Still, I find going case-less is a ton of fun, improves cooling, access to components etc...just requires some decent layout and dust cover planning...try it, you might like it smile.gif
post #17543 of 33558
Quote:
Originally Posted by lilchronic View Post

im bout to get the h220 with the rad on the top then fit two of these rads next to each other on the front of my case with some delta fans.
then after that ill get some water blocks for my 670's thumb.gif

http://www.frozencpu.com/products/7142/ex-rad-128/Black_Ice_GTX_Xtreme_M184_Radiator_-_Black.html?tl=g30c95s759#blank
http://www.sidewindercomputers.com/de92ffhisp.html

...just installed the BlackIce rad above as part of a bigger loop - great performer in smaller package
post #17544 of 33558
Quote:
Originally Posted by lilchronic View Post

did u enable pll overvoltage?

yea.I tried it on auto and i ran it all the way up to 1.8v i believe it was. whatever intels max recommended spec is, i don't recall it at the moment.

Quote:
Originally Posted by dr/owned View Post


Had a chip that was similar to this. Had to throw a ton of voltage to get past 4.5 Ghz. That chip now belongs to AVADirect, who apparently buy used processors for their builds.

so it was the chip in your case then.

The reason i'm asking is i'm going to move to sli soon and my board doesn't support it... if i've got a dud chip i'm not really going to replace the chip, If it's a dud there's no sense buying a higher end mobo.

Unless there's a market for 4.6ghz capped de-lidded chips i don't know about haha.
post #17545 of 33558
Thread Starter 
Quote:
Originally Posted by plu2 View Post

Another hammer/vice success story:
Warning: Spoiler! (Click to show)

OCN name: plu2
CPU: 3770K
on die-TIM: Coollaboratory Liquid ultra
ihs-TIM: Bare die
Mhz gained: None yet
OC after delid: 4,5Ghz
Temp drops: ~17C
CPU-Z validation of max OC: http://valid.canardpc.com/2774978

Please note that I de-lidded the CPU and build a new custom liquid cooled loop around it immediately after, so the temp drops are somewhat not valid for the research ...
This test was done running the fans fixed at 600-750 RPM. I am sure I would get even better temps running the fans much faster...

You're In! thumb.gif Use the Sig wisely! tongue.gif
post #17546 of 33558
Just finished. So far I am very happy. Before it would jump over 84c on IBT and now its barely at 70 with h100i

OCN name: j0sh
CPU: 3770K
on die-TIM: Coollaboratory Liquid ultra
ihs-TIM: Coollaboratory Liquid ultra
Mhz gained: 400Mhz
OC after delid: 4.7Ghz
Temp drops: ~14C
CPU-Z validation of max OC:



post #17547 of 33558
Quote:
Originally Posted by couchasault9001 View Post

yea.I tried it on auto and i ran it all the way up to 1.8v i believe it was. whatever intels max recommended spec is, i don't recall it at the moment.
so it was the chip in your case then.

The reason i'm asking is i'm going to move to sli soon and my board doesn't support it... if i've got a dud chip i'm not really going to replace the chip, If it's a dud there's no sense buying a higher end mobo.

Unless there's a market for 4.6ghz capped de-lidded chips i don't know about haha.
There's actually quite a few people around these forums that seem to have issues going over 4.6. We should start our own club... The **** out of luck ivy oc club
post #17548 of 33558
6 GHz, Prime95
Quote:
Originally Posted by Qlix View Post

There's actually quite a few people around these forums that seem to have issues going over 4.6. We should start our own club... The **** out of luck ivy oc club

...funny that you mention another club - just came from some light reading at the 6GHz club and saw a reference to this post on Prime95/12hrs: biggrin.gif

http://www.overclock.net/t/1243800/2500k-max-multi-56#post_16996531
post #17549 of 33558
Quote:
Originally Posted by Joa3d43 View Post


...had an externally mounted rad on a previous build - worked great, also re lower temps... BUT now going completely case-less - gives a whole new meaning to 'thinking outside the box' - what freedom ! thumb.gif

...little choice anyways...what with two mobos in one combined build and 900mm x 60 mm rads in total. Still, I find going case-less is a ton of fun, improves cooling, access to components etc...just requires some decent layout and dust cover planning...try it, you might like it smile.gif

LOL caseless. Been doing that for about a decade. Use Lowes metal shelving units, mojo trays, Thermalkake icages and zipties. Not classy looking, and have to blow it out every few weeks but I can do whatever I want. Just built a rig for the bro using a 20 dollar 3 shelf unit that has enough room for whatever he wants to do. We closed three of the sides with some stamped metal sheets that have X hole patterns cut in them so there is plenty of airflow, and 230mm fans. Then made a flip up door out of the two sheets covering the front for easy access. He says it looks like something Godzilla would crush on a cheap movie set and I think it looks like an oil refinery. Whatever, it was less than 100 bucks with the stamped sheets and drive cage and will work with any hardware and has room for a plastic Godzilla.
Caseless
(17 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3770k Asus Maximus V Extreme EVGA 780ti SC ASC G.Skill Trident X 2400 
Hard DriveHard DriveOptical DriveCooling
Muskin MSATA Segate 3tb 7200rpm 32gig cache 2x LG BD Burner XSPC Raystorm RX360kit 
OSMonitorKeyboardPower
Windows 7 Ultimate Samsung 46" 'SmartTV' 240hz Coolermaster CM Storm Corsair 1200i 
CaseMouseMouse PadAudio
Lowes 6ft 5 shelf metal rack with extra shelf. Corsair M65 Corsair metal pad. Logitech with subwoofer or home AV (Polk, Tandb... 
Other
Soundblaster SB-Z 
  hide details  
Reply
Caseless
(17 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3770k Asus Maximus V Extreme EVGA 780ti SC ASC G.Skill Trident X 2400 
Hard DriveHard DriveOptical DriveCooling
Muskin MSATA Segate 3tb 7200rpm 32gig cache 2x LG BD Burner XSPC Raystorm RX360kit 
OSMonitorKeyboardPower
Windows 7 Ultimate Samsung 46" 'SmartTV' 240hz Coolermaster CM Storm Corsair 1200i 
CaseMouseMouse PadAudio
Lowes 6ft 5 shelf metal rack with extra shelf. Corsair M65 Corsair metal pad. Logitech with subwoofer or home AV (Polk, Tandb... 
Other
Soundblaster SB-Z 
  hide details  
Reply
post #17550 of 33558
Quote:
Originally Posted by Joa3d43 View Post


...had an externally mounted rad on a previous build - worked great, also re lower temps... BUT now going completely case-less - gives a whole new meaning to 'thinking outside the box' - what freedom ! thumb.gif

...little choice anyways...what with two mobos in one combined build and 900mm x 60 mm rads in total. Still, I find going case-less is a ton of fun, improves cooling, access to components etc...just requires some decent layout and dust cover planning...try it, you might like it smile.gif
my brothers rig

Quote:
yea.I tried it on auto and i ran it all the way up to 1.8v i believe it was. whatever intels max recommended spec is, i don't recall it at the moment.
No i mean Internal PLL Overvoltage enable it, insted of auto
Daily Rig
(21 items)
 
Bench Setup
(19 items)
 
 
CPUMotherboardGraphicsRAM
5820k 4.7Ghz @ 1.28vcore / 1.88vccin Gigabyte x99 SOC Champion EVGA GTX 1080Ti G.SKILL Trident Z 32GB 3200Mhz CL14 
Hard DriveHard DriveHard DriveHard Drive
2x Intel 520 120Gb SSD in RAID 0  Intel 180Gb 530 SSD OS Drive 2Tb WD HDD  2x Intel 730 SSD 480GB in RAID 0 
CoolingCoolingCoolingCooling
2x HWLabs GTX360 Black Ice in Push Pull EK blocks for CPU / GPU's 6x corsair sp120 2350RPM 6x Ek Vardar 120 F4's 2200rpm  
OSMonitorKeyboardPower
windows 10 XB270HU 2560x1440 - 144Hz - G-sync Razor blackwidow cooler master V1000 
CaseMouseMouse PadAudio
Corsair 780T EVGA TORQ x10 evga mouse pad 2.1 audio / Hyper X cloud II / Sennheiser Gam... 
Other
EK pump / res 
CPUMotherboardGraphicsGraphics
6600k Z170M OC Formula GTX780Ti AMD HD6450 
RAMHard DriveHard DriveHard Drive
Trident Z 3600Mhz cl16 2x8GB 120Gb intel 520 120Gb intel 520 64Gb adata ssd  
Hard DriveOptical DriveCoolingCooling
750Gb WD Black Sony  F1 Gemini CPU Pot Tek - 9 Fat 
CoolingOSMonitorPower
custom loop two 240rad's xp,W7,W8,W10 x-star 2560x1440  Rosewill Quark-650 Platinum / Antec HCP-850 Pla... 
CaseMouseMouse Pad
Dimastech Mini V1.0 black razor abyssus Razor 
  hide details  
Reply
Daily Rig
(21 items)
 
Bench Setup
(19 items)
 
 
CPUMotherboardGraphicsRAM
5820k 4.7Ghz @ 1.28vcore / 1.88vccin Gigabyte x99 SOC Champion EVGA GTX 1080Ti G.SKILL Trident Z 32GB 3200Mhz CL14 
Hard DriveHard DriveHard DriveHard Drive
2x Intel 520 120Gb SSD in RAID 0  Intel 180Gb 530 SSD OS Drive 2Tb WD HDD  2x Intel 730 SSD 480GB in RAID 0 
CoolingCoolingCoolingCooling
2x HWLabs GTX360 Black Ice in Push Pull EK blocks for CPU / GPU's 6x corsair sp120 2350RPM 6x Ek Vardar 120 F4's 2200rpm  
OSMonitorKeyboardPower
windows 10 XB270HU 2560x1440 - 144Hz - G-sync Razor blackwidow cooler master V1000 
CaseMouseMouse PadAudio
Corsair 780T EVGA TORQ x10 evga mouse pad 2.1 audio / Hyper X cloud II / Sennheiser Gam... 
Other
EK pump / res 
CPUMotherboardGraphicsGraphics
6600k Z170M OC Formula GTX780Ti AMD HD6450 
RAMHard DriveHard DriveHard Drive
Trident Z 3600Mhz cl16 2x8GB 120Gb intel 520 120Gb intel 520 64Gb adata ssd  
Hard DriveOptical DriveCoolingCooling
750Gb WD Black Sony  F1 Gemini CPU Pot Tek - 9 Fat 
CoolingOSMonitorPower
custom loop two 240rad's xp,W7,W8,W10 x-star 2560x1440  Rosewill Quark-650 Platinum / Antec HCP-850 Pla... 
CaseMouseMouse Pad
Dimastech Mini V1.0 black razor abyssus Razor 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide