Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 177

post #1761 of 33675
Quote:
Originally Posted by ChaosAD View Post

Thanx for your answers, so you think the only problem is this black intel thing not letting ihs sit tight on the die? i have to check again then...

Yes, die to IHS contact seems to be the problem. At least it sounds it to me.
post #1762 of 33675
Thread Starter 
Quote:
Originally Posted by neopunx View Post

Are any of you on active Folding Teams? Any of you guys willing to help out the new guy?

PM me and ill help ya out! tongue.gif
Quote:
Originally Posted by kgtuning View Post

Yes, die to IHS contact seems to be the problem. At least it sounds it to me.

Yup I lost 12 C with using pk3 and I need to get rid of all of the black goop still I need to get sand paper today as well since my lp is finally here YES! Then ill posts my results of temp drops and such for each OC.....yet again lol another long time for temps woo....hoo lol thumb.gif

Must show INTEL what's up.
post #1763 of 33675
Quote:
Originally Posted by ChaosAD View Post

I just delidded my cpu. It was dead easy although i had the fear of destorying it tongue.gif I used Liquid Pro on die and Phobya HeGrease Extreme between IHS and cpu block. I booted the pc just to see that my temps were ONLY 5C better than before while crunching at 4.42ghz @ 1.2v Max temp Before Delid 83-84-83-81 and After Delid 79-79-79-77. I dont know what i did wrong and only have such a low drop mad.gif

Put tim on thicker... You can put LP ontop of LP so do not worry about that.. just put another coat on top of it..
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
post #1764 of 33675
Alright installed the h100 and liquid pro on the ihs, temps@ 4.9 and 1.386 volts, after an hour of prime small ffts max temp was 74 on 1 core, the other 3 were 70
ivybeech
(21 items)
 
4K-HTPC
(12 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 6700k@4.7ghz Gigabyte z170xp-sli Nvidia GTX 1080Ti 16gb Team Xtreem DDR4 @16/18/18/37 3333mhz 
Hard DriveHard DriveHard DriveHard Drive
256gb M4 SSD boot 4TB Seagate - Raid 0 4TB Seagate - Raid 0 2TB Western Digital Green for storage 
Hard DriveHard DriveHard DriveHard Drive
5TB Seagate 3 tb Seagate  2TB Seagate 4TB of various external storage 
CoolingOSMonitorMonitor
Corsair H100 in push/pull Windows 10 pro ASUS ROG Swift PG278Q 27" OC Catleap Q270SE IPS 2560x1440@120hz 
KeyboardPowerCaseMouse
Xarmor mechanical cherry mx-brown Hale90 1000w 80+gold EVGA DG-87 Logitech G502 
CPUMotherboardGraphicsRAM
Intel i5-2400 Intel DP67BG Nvidia GTX 950 8gb Gskill Ripjaws 1600mhz ddr3 
Hard DriveOptical DriveCoolingOS
256gb samsung SSD Asus Blu-ray Drive Model BC-12B1ST/BLK/B/AS Corsair H50 push/pull Windows 7 Professional 
MonitorPowerCase
Vizio m60-c3 - 3840x2160 OCZ ZT 750w Silverstone Grandia gd-05 
  hide details  
Reply
ivybeech
(21 items)
 
4K-HTPC
(12 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 6700k@4.7ghz Gigabyte z170xp-sli Nvidia GTX 1080Ti 16gb Team Xtreem DDR4 @16/18/18/37 3333mhz 
Hard DriveHard DriveHard DriveHard Drive
256gb M4 SSD boot 4TB Seagate - Raid 0 4TB Seagate - Raid 0 2TB Western Digital Green for storage 
Hard DriveHard DriveHard DriveHard Drive
5TB Seagate 3 tb Seagate  2TB Seagate 4TB of various external storage 
CoolingOSMonitorMonitor
Corsair H100 in push/pull Windows 10 pro ASUS ROG Swift PG278Q 27" OC Catleap Q270SE IPS 2560x1440@120hz 
KeyboardPowerCaseMouse
Xarmor mechanical cherry mx-brown Hale90 1000w 80+gold EVGA DG-87 Logitech G502 
CPUMotherboardGraphicsRAM
Intel i5-2400 Intel DP67BG Nvidia GTX 950 8gb Gskill Ripjaws 1600mhz ddr3 
Hard DriveOptical DriveCoolingOS
256gb samsung SSD Asus Blu-ray Drive Model BC-12B1ST/BLK/B/AS Corsair H50 push/pull Windows 7 Professional 
MonitorPowerCase
Vizio m60-c3 - 3840x2160 OCZ ZT 750w Silverstone Grandia gd-05 
  hide details  
Reply
post #1765 of 33675
I got rid of all the black goop on my ihs but hardly any on the pcb itself, I'm still noticing massive temp differences
Edited by y2kcamaross - 10/28/12 at 10:24am
ivybeech
(21 items)
 
4K-HTPC
(12 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 6700k@4.7ghz Gigabyte z170xp-sli Nvidia GTX 1080Ti 16gb Team Xtreem DDR4 @16/18/18/37 3333mhz 
Hard DriveHard DriveHard DriveHard Drive
256gb M4 SSD boot 4TB Seagate - Raid 0 4TB Seagate - Raid 0 2TB Western Digital Green for storage 
Hard DriveHard DriveHard DriveHard Drive
5TB Seagate 3 tb Seagate  2TB Seagate 4TB of various external storage 
CoolingOSMonitorMonitor
Corsair H100 in push/pull Windows 10 pro ASUS ROG Swift PG278Q 27" OC Catleap Q270SE IPS 2560x1440@120hz 
KeyboardPowerCaseMouse
Xarmor mechanical cherry mx-brown Hale90 1000w 80+gold EVGA DG-87 Logitech G502 
CPUMotherboardGraphicsRAM
Intel i5-2400 Intel DP67BG Nvidia GTX 950 8gb Gskill Ripjaws 1600mhz ddr3 
Hard DriveOptical DriveCoolingOS
256gb samsung SSD Asus Blu-ray Drive Model BC-12B1ST/BLK/B/AS Corsair H50 push/pull Windows 7 Professional 
MonitorPowerCase
Vizio m60-c3 - 3840x2160 OCZ ZT 750w Silverstone Grandia gd-05 
  hide details  
Reply
ivybeech
(21 items)
 
4K-HTPC
(12 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 6700k@4.7ghz Gigabyte z170xp-sli Nvidia GTX 1080Ti 16gb Team Xtreem DDR4 @16/18/18/37 3333mhz 
Hard DriveHard DriveHard DriveHard Drive
256gb M4 SSD boot 4TB Seagate - Raid 0 4TB Seagate - Raid 0 2TB Western Digital Green for storage 
Hard DriveHard DriveHard DriveHard Drive
5TB Seagate 3 tb Seagate  2TB Seagate 4TB of various external storage 
CoolingOSMonitorMonitor
Corsair H100 in push/pull Windows 10 pro ASUS ROG Swift PG278Q 27" OC Catleap Q270SE IPS 2560x1440@120hz 
KeyboardPowerCaseMouse
Xarmor mechanical cherry mx-brown Hale90 1000w 80+gold EVGA DG-87 Logitech G502 
CPUMotherboardGraphicsRAM
Intel i5-2400 Intel DP67BG Nvidia GTX 950 8gb Gskill Ripjaws 1600mhz ddr3 
Hard DriveOptical DriveCoolingOS
256gb samsung SSD Asus Blu-ray Drive Model BC-12B1ST/BLK/B/AS Corsair H50 push/pull Windows 7 Professional 
MonitorPowerCase
Vizio m60-c3 - 3840x2160 OCZ ZT 750w Silverstone Grandia gd-05 
  hide details  
Reply
post #1766 of 33675
Quote:
Originally Posted by y2kcamaross View Post

Alright installed the h100 and liquid pro on the ihs, temps@ 4.9 and 1.386 volts, after an hour of prime small ffts max temp was 74 on 1 core, the other 3 were 70

those temps 70-74C for 4.9ghz running prime are about right..

Quote:
Originally Posted by y2kcamaross View Post

I got rid of all the black goop on my ihs but hardly any on the pcb itself, I'm still noticing massive temp differences

massive differences, you mean the 4C diff you mentioned above?
theres always a bit difference between cores temp wise,
one reason could be what they call the "sleeping core",
i had 10-15C diff before delid, now its about 6-7C

not sure if you gonna take it off again to get rid of some more
adhesive on the pcb, if you do, and put it back together again,
take note of that black retangle

if you put down the lever, dont let the IHS slide to much on there,
because of the adhesive is mostly gone now, that thing there
is high as a mountain..lol best is to get it a bit more to the back..
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
post #1767 of 33675
Quote:
Originally Posted by ChaosAD View Post

Thanx for your answers, so you think the only problem is this black intel thing not letting ihs sit tight on the die? i have to check again then...

yea, i think it could be something the others mentioned,
and that black intel thing could be one of them too, read above ..lol

most of us see a temp drop of at least 15-20C,
the others see 20C+

you should have at least 15C difference.. right "crew" ? biggrin.gif
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
post #1768 of 33675
Quote:
Originally Posted by VonDutch View Post

Quote:
Originally Posted by y2kcamaross View Post

Alright installed the h100 and liquid pro on the ihs, temps@ 4.9 and 1.386 volts, after an hour of prime small ffts max temp was 74 on 1 core, the other 3 were 70

those temps 70-74C for 4.9ghz running prime are about right..

Quote:
Originally Posted by y2kcamaross View Post

I got rid of all the black goop on my ihs but hardly any on the pcb itself, I'm still noticing massive temp differences

massive differences, you mean the 4C diff you mentioned above?
theres always a bit difference between cores temp wise,
one reason could be what they call the "sleeping core",
i had 10-15C diff before delid, now its about 6-7C

not sure if you gonna take it off again to get rid of some more
adhesive on the pcb, if you do, and put it back together again,
take note of that black retangle

if you put down the lever, dont let the IHS slide to much on there,
because of the adhesive is mostly gone now, that thing there
is high as a mountain..lol best is to get it a bit more to the back..
No,i meant massive temp differences before and after deliddig even while leaving some black adhesive on the pcb, before delidding I'd hit 100 degrees@ 4.8 and 1.33 v
ivybeech
(21 items)
 
4K-HTPC
(12 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 6700k@4.7ghz Gigabyte z170xp-sli Nvidia GTX 1080Ti 16gb Team Xtreem DDR4 @16/18/18/37 3333mhz 
Hard DriveHard DriveHard DriveHard Drive
256gb M4 SSD boot 4TB Seagate - Raid 0 4TB Seagate - Raid 0 2TB Western Digital Green for storage 
Hard DriveHard DriveHard DriveHard Drive
5TB Seagate 3 tb Seagate  2TB Seagate 4TB of various external storage 
CoolingOSMonitorMonitor
Corsair H100 in push/pull Windows 10 pro ASUS ROG Swift PG278Q 27" OC Catleap Q270SE IPS 2560x1440@120hz 
KeyboardPowerCaseMouse
Xarmor mechanical cherry mx-brown Hale90 1000w 80+gold EVGA DG-87 Logitech G502 
CPUMotherboardGraphicsRAM
Intel i5-2400 Intel DP67BG Nvidia GTX 950 8gb Gskill Ripjaws 1600mhz ddr3 
Hard DriveOptical DriveCoolingOS
256gb samsung SSD Asus Blu-ray Drive Model BC-12B1ST/BLK/B/AS Corsair H50 push/pull Windows 7 Professional 
MonitorPowerCase
Vizio m60-c3 - 3840x2160 OCZ ZT 750w Silverstone Grandia gd-05 
  hide details  
Reply
ivybeech
(21 items)
 
4K-HTPC
(12 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 6700k@4.7ghz Gigabyte z170xp-sli Nvidia GTX 1080Ti 16gb Team Xtreem DDR4 @16/18/18/37 3333mhz 
Hard DriveHard DriveHard DriveHard Drive
256gb M4 SSD boot 4TB Seagate - Raid 0 4TB Seagate - Raid 0 2TB Western Digital Green for storage 
Hard DriveHard DriveHard DriveHard Drive
5TB Seagate 3 tb Seagate  2TB Seagate 4TB of various external storage 
CoolingOSMonitorMonitor
Corsair H100 in push/pull Windows 10 pro ASUS ROG Swift PG278Q 27" OC Catleap Q270SE IPS 2560x1440@120hz 
KeyboardPowerCaseMouse
Xarmor mechanical cherry mx-brown Hale90 1000w 80+gold EVGA DG-87 Logitech G502 
CPUMotherboardGraphicsRAM
Intel i5-2400 Intel DP67BG Nvidia GTX 950 8gb Gskill Ripjaws 1600mhz ddr3 
Hard DriveOptical DriveCoolingOS
256gb samsung SSD Asus Blu-ray Drive Model BC-12B1ST/BLK/B/AS Corsair H50 push/pull Windows 7 Professional 
MonitorPowerCase
Vizio m60-c3 - 3840x2160 OCZ ZT 750w Silverstone Grandia gd-05 
  hide details  
Reply
post #1769 of 33675
For sure..... from highest temp before to the highest temp after delid for me was 24c but I average it out over all cores it was 22.25c.
post #1770 of 33675
guys do i have to remove that black glue on the IHS AND the PCB ?
i dont know how to get rid of it ,, i thought of using razor but .. frown.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide