Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 1867

post #18661 of 33548
Haswell out... lets see the delid effect \0/
Hydra
(13 items)
 
Hydra 2
(23 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 3930k @4.4ghz@1.44v Asrock X79 Fataility Champion 3xInno3d GTX 780 with Full Nickel EK Waterblocks Gskill RipjawsX 4x4GB@2400mhz 11-11-11-31 
Hard DriveCoolingMonitorKeyboard
2xSamsung 830 256gb Custom H2O - 3x XSPC RX360 with EK Blocks Surround Gaming 3x1440@96hz (X-Star) Cooler Master Trigger Red Caps 
PowerCaseMouseAudio
Seasonic 1250 watt Danger Den Double Wide 21 Roccat Kone+ Creative ZX (Incoming) 
Audio
Roccat Kave 5.1 Headphones 
CPUMotherboardGraphicsGraphics
4930k Asus Extreme Black Edition Sapphire R9 290x Sapphire R9 290x 
GraphicsGraphicsRAMHard Drive
Sapphire R9 290x Sapphire R9 290x Gskil TridentX 2400mhz Samsung 830 256GB 
Hard DriveCoolingCoolingCooling
Samsung 840 500GB EK Supramacy 4x EK Blocks 6x EK XTX480 
CoolingOSMonitorMonitor
EK XT360 Windows 8.1 BenQ 3201 32in 4k IPS Qnix 32in 1440 MVA 
MonitorKeyboardPowerCase
Qnix 32in 1440 MVA Coolermaster Storm Trigger 2x Seasonic 1250watt Case Labs TH10 
MouseAudioAudio
Roccat Kone Creative ZX AKG K7XX 
  hide details  
Reply
Hydra
(13 items)
 
Hydra 2
(23 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 3930k @4.4ghz@1.44v Asrock X79 Fataility Champion 3xInno3d GTX 780 with Full Nickel EK Waterblocks Gskill RipjawsX 4x4GB@2400mhz 11-11-11-31 
Hard DriveCoolingMonitorKeyboard
2xSamsung 830 256gb Custom H2O - 3x XSPC RX360 with EK Blocks Surround Gaming 3x1440@96hz (X-Star) Cooler Master Trigger Red Caps 
PowerCaseMouseAudio
Seasonic 1250 watt Danger Den Double Wide 21 Roccat Kone+ Creative ZX (Incoming) 
Audio
Roccat Kave 5.1 Headphones 
CPUMotherboardGraphicsGraphics
4930k Asus Extreme Black Edition Sapphire R9 290x Sapphire R9 290x 
GraphicsGraphicsRAMHard Drive
Sapphire R9 290x Sapphire R9 290x Gskil TridentX 2400mhz Samsung 830 256GB 
Hard DriveCoolingCoolingCooling
Samsung 840 500GB EK Supramacy 4x EK Blocks 6x EK XTX480 
CoolingOSMonitorMonitor
EK XT360 Windows 8.1 BenQ 3201 32in 4k IPS Qnix 32in 1440 MVA 
MonitorKeyboardPowerCase
Qnix 32in 1440 MVA Coolermaster Storm Trigger 2x Seasonic 1250watt Case Labs TH10 
MouseAudioAudio
Roccat Kone Creative ZX AKG K7XX 
  hide details  
Reply
post #18662 of 33548
Quote:
Originally Posted by King4x4 View Post

Haswell out... lets see the delid effect \0/

This.
Burning Chrome
(18 items)
 
  
CPUMotherboardGraphicsGraphics
i7 6800k ASUS x99 a ii GeForce GTX 980 GeForce GTX 980 
RAMHard DriveHard DriveHard Drive
corsair vengeance lpx ddr4 3200 2x8 Crucial MX100 256 GB Crucial MX100 256 GB Crucial MX300 1 TB 
Hard DriveCoolingOSOS
Western Digital Caviar Black 1 TB Corsair H100i V2 Windows 10 Pro Arch Linux 
MonitorMonitorKeyboardPower
Acer G235H ASUS PB278Q Corsair Vengeance K70 Corsair ax860i 
CaseMouse
Fractal Design Define s Corsair M45 
  hide details  
Reply
Burning Chrome
(18 items)
 
  
CPUMotherboardGraphicsGraphics
i7 6800k ASUS x99 a ii GeForce GTX 980 GeForce GTX 980 
RAMHard DriveHard DriveHard Drive
corsair vengeance lpx ddr4 3200 2x8 Crucial MX100 256 GB Crucial MX100 256 GB Crucial MX300 1 TB 
Hard DriveCoolingOSOS
Western Digital Caviar Black 1 TB Corsair H100i V2 Windows 10 Pro Arch Linux 
MonitorMonitorKeyboardPower
Acer G235H ASUS PB278Q Corsair Vengeance K70 Corsair ax860i 
CaseMouse
Fractal Design Define s Corsair M45 
  hide details  
Reply
post #18663 of 33548
after delidded the temps of the four core must be aligned ? in idle I have 12-13° of difference between the hottest and the coldest core.. it's normal?

anyway, it's my result:

http://www.overclock.net/t/1313179/official-delidded-club/18640#post_20084063

how is it?

thnx
post #18664 of 33548
Alright so I've delidded two older cpu's (I believe they were P4, not even sure, had them lying around) and on the first one where I took my time the chip looked 100% and on the second one where I rushed it, seemed that the edge of the PCB had a tiny knick on the top middle right around the edge. It was barely noticeable. I don't have a motherboard to test either chip unfortunately but for the most part, they looked OK.

Right now I'm on a 3770K 4.7ghz @ 1.255v with ultra LLC spiking it up to 1.272v. I've done a 12 hour prime 95 run and it was stable.

My temps were brutal 86-93-90-86. I'm planning on switching out my 212+ for a Phanteks with 3x TY-143's and even changing my case because the airflow in this Antec Eleven Hundred is pitiful. I'm hoping to drop 5-10c off that alone. Bare in mind, I'm using standard TIM right now and I'm switching to Arctic Silver 5 when I get my new cooler next week.

My question to you all is, should I delid my 3770k? I'm not going to blame anyone but myself if I screw it up, but I just wonder with CLL Ultra on the die, AS5 on the IHS and all those other changes above listed, what kind of temps I would get in the end. If it would be really worth it to even risk delidding. I wonder what this chip can achieve at around 1.35v to 1.4v if I were to do all that. I'll post an update with my temps and a 12 hour prime 95 after switching the cooler and TIM, and then I'll see what kind of safe overclocks I can achieve pre-delid, and then if I do decide to delid I'll post some after reports as well.

Tl;dr version: Is it worthwhile to delid my chip or should I just shutup and be happy with a 4.7ghz stable at 1.255v?
Gaming Rig
(19 items)
 
   
OtherOtherOtherOther
HEATKILLER CPU Kuhler Rev3.0 1155 Cross-Flow Slim High Density Dual 120mm Radiato... DazMode STORM D5 VARIO 8-24V Pump w/TACH cable RP-452X2 Rev 2.0 Dual 5.25" Reservoir  
OtherOtherOtherOther
1/2"ID - 3/4"OD Straight Compression Fitting x4 Thermochill Flex 1/2"OD -3/4"ID Tube - Clear x8ft Feser Aqua - Bi-Distilled Uber Pure Water San Ace High Performace "Slim" Fan 120x25mm x4 
OtherOtherOtherOther
Watercool Heatkiller GPU-X² / X³ Dual-Link EK-FC680 GTX FTW - Acetal+Nickel Full Cover Blo... EK-FC680 GTX FTW - Acetal+Nickel Full Cover Blo... Cross-Flow Slim High Density Dual 120mm Radiato... 
OtherOtherOtherOther
RayStorm CPU WaterBlock (Intel) Special Edition... 1/2"ID - 3/4"OD Straight Compression Fitting - ... 1/2"ID - 3/4"OD Rotary 90 Deg. Angled Compressi... Thermochill Flex 1/2"OD -3/4"ID Tube - Blue (UV) 
OtherOtherOtherOther
Feser One - Cooling Fluid - Pure San Ace High Performace "Slim" Fan 120x25mm 100... EK-FC680 GTX FTW - Acetal+Nickel Full Cover Blo... EK-FC680 GTX FTW - Acetal+Nickel Full Cover Blo... 
OtherOtherOtherOther
EK-FC CSQ Bridge DUAL 3-SLOT GPU Parallel SLI/C... EK-CoolStream RAD XT 360 - Triple Standard 120m... EK-CoolStream RAD XT 360 - Triple Standard 120m... DazMode STORM DDC 3.2 PWM 18W Pump 
OtherOther
FrozenQ Liquid Fusion Dual Bay Reservoir Rev 2 ... FrozenQ Fusion Reservoir Rev.8 UV Blue - 250mm 
  hide details  
Reply
Gaming Rig
(19 items)
 
   
OtherOtherOtherOther
HEATKILLER CPU Kuhler Rev3.0 1155 Cross-Flow Slim High Density Dual 120mm Radiato... DazMode STORM D5 VARIO 8-24V Pump w/TACH cable RP-452X2 Rev 2.0 Dual 5.25" Reservoir  
OtherOtherOtherOther
1/2"ID - 3/4"OD Straight Compression Fitting x4 Thermochill Flex 1/2"OD -3/4"ID Tube - Clear x8ft Feser Aqua - Bi-Distilled Uber Pure Water San Ace High Performace "Slim" Fan 120x25mm x4 
OtherOtherOtherOther
Watercool Heatkiller GPU-X² / X³ Dual-Link EK-FC680 GTX FTW - Acetal+Nickel Full Cover Blo... EK-FC680 GTX FTW - Acetal+Nickel Full Cover Blo... Cross-Flow Slim High Density Dual 120mm Radiato... 
OtherOtherOtherOther
RayStorm CPU WaterBlock (Intel) Special Edition... 1/2"ID - 3/4"OD Straight Compression Fitting - ... 1/2"ID - 3/4"OD Rotary 90 Deg. Angled Compressi... Thermochill Flex 1/2"OD -3/4"ID Tube - Blue (UV) 
OtherOtherOtherOther
Feser One - Cooling Fluid - Pure San Ace High Performace "Slim" Fan 120x25mm 100... EK-FC680 GTX FTW - Acetal+Nickel Full Cover Blo... EK-FC680 GTX FTW - Acetal+Nickel Full Cover Blo... 
OtherOtherOtherOther
EK-FC CSQ Bridge DUAL 3-SLOT GPU Parallel SLI/C... EK-CoolStream RAD XT 360 - Triple Standard 120m... EK-CoolStream RAD XT 360 - Triple Standard 120m... DazMode STORM DDC 3.2 PWM 18W Pump 
OtherOther
FrozenQ Liquid Fusion Dual Bay Reservoir Rev 2 ... FrozenQ Fusion Reservoir Rev.8 UV Blue - 250mm 
  hide details  
Reply
post #18665 of 33548
Quote:
Originally Posted by neofury View Post

Alright so I've delidded two older cpu's (I believe they were P4, not even sure, had them lying around) and on the first one where I took my time the chip looked 100% and on the second one where I rushed it, seemed that the edge of the PCB had a tiny knick on the top middle right around the edge. It was barely noticeable. I don't have a motherboard to test either chip unfortunately but for the most part, they looked OK.

Right now I'm on a 3770K 4.7ghz @ 1.255v with ultra LLC spiking it up to 1.272v. I've done a 12 hour prime 95 run and it was stable.

My temps were brutal 86-93-90-86. I'm planning on switching out my 212+ for a Phanteks with 3x TY-143's and even changing my case because the airflow in this Antec Eleven Hundred is pitiful. I'm hoping to drop 5-10c off that alone. Bare in mind, I'm using standard TIM right now and I'm switching to Arctic Silver 5 when I get my new cooler next week.

My question to you all is, should I delid my 3770k? I'm not going to blame anyone but myself if I screw it up, but I just wonder with CLL Ultra on the die, AS5 on the IHS and all those other changes above listed, what kind of temps I would get in the end. If it would be really worth it to even risk delidding. I wonder what this chip can achieve at around 1.35v to 1.4v if I were to do all that. I'll post an update with my temps and a 12 hour prime 95 after switching the cooler and TIM, and then I'll see what kind of safe overclocks I can achieve pre-delid, and then if I do decide to delid I'll post some after reports as well.

Tl;dr version: Is it worthwhile to delid my chip or should I just shutup and be happy with a 4.7ghz stable at 1.255v?

That's really something that you'd have to ask yourself. However, if you do, I'd strongly recommend using the vice method and not the razor one.
Burning Chrome
(18 items)
 
  
CPUMotherboardGraphicsGraphics
i7 6800k ASUS x99 a ii GeForce GTX 980 GeForce GTX 980 
RAMHard DriveHard DriveHard Drive
corsair vengeance lpx ddr4 3200 2x8 Crucial MX100 256 GB Crucial MX100 256 GB Crucial MX300 1 TB 
Hard DriveCoolingOSOS
Western Digital Caviar Black 1 TB Corsair H100i V2 Windows 10 Pro Arch Linux 
MonitorMonitorKeyboardPower
Acer G235H ASUS PB278Q Corsair Vengeance K70 Corsair ax860i 
CaseMouse
Fractal Design Define s Corsair M45 
  hide details  
Reply
Burning Chrome
(18 items)
 
  
CPUMotherboardGraphicsGraphics
i7 6800k ASUS x99 a ii GeForce GTX 980 GeForce GTX 980 
RAMHard DriveHard DriveHard Drive
corsair vengeance lpx ddr4 3200 2x8 Crucial MX100 256 GB Crucial MX100 256 GB Crucial MX300 1 TB 
Hard DriveCoolingOSOS
Western Digital Caviar Black 1 TB Corsair H100i V2 Windows 10 Pro Arch Linux 
MonitorMonitorKeyboardPower
Acer G235H ASUS PB278Q Corsair Vengeance K70 Corsair ax860i 
CaseMouse
Fractal Design Define s Corsair M45 
  hide details  
Reply
post #18666 of 33548
Par,
Idle temps don’t really mean anything, and are often times inaccurate. Your load temps are what matter with your chip oced. In your post it looks like your temps are really low, so I don’t see much of a problem. When you oc the chip and run Prime95 with 90% ram usuage for a half hour then you will get a better idea of what your temps look like. A delidded chip should have less than 10c between the highest and lowest max core temps while running a stress test.

Neofury,
4.7 at 1.255 is great and you should be happy with that, but 93c testing temps are not that great. So it is up to you, but you are asking in the delidded club so most of us will say, of course you should delid. Then you can go for 4.9 with probably better temps, but nothing is risk free so it is up to you.

You could wait for your new cooler and see if that is good enough for you. Also AS5 is not all that great, something like MX-4 should give you a couple c better.
Ivy 5.0
(14 items)
 
Ivy 4.8
(15 items)
 
 
CPUMotherboardGraphicsRAM
i7-3770k 5.0 24/7 Maximus V Formula EVGA GTX 690 G.Skill Trident X 2400 (2x8gb) 
Hard DriveOptical DriveCoolingOS
Samsung 840 Pro 512GB Pioneer BD-RW Swiftech H220 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
2 x NEC 30" Logitech G15 Corsair AX1200 NZXT Switch 810 
MouseAudio
Logitech G9x Logitech G51 
  hide details  
Reply
Ivy 5.0
(14 items)
 
Ivy 4.8
(15 items)
 
 
CPUMotherboardGraphicsRAM
i7-3770k 5.0 24/7 Maximus V Formula EVGA GTX 690 G.Skill Trident X 2400 (2x8gb) 
Hard DriveOptical DriveCoolingOS
Samsung 840 Pro 512GB Pioneer BD-RW Swiftech H220 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
2 x NEC 30" Logitech G15 Corsair AX1200 NZXT Switch 810 
MouseAudio
Logitech G9x Logitech G51 
  hide details  
Reply
post #18667 of 33548
After seeing haswell reviews I decided to screw haswell and ordered CLU to delid my 3770k. It does 4.5GHz at 1.15V (but at 80 °C) so I hope I can reach 5.0 after delidding. I'll try to RMA my H100 for a H100i because I have one of those rattling pump units. If it still is too hot for my standards I'll do a custom loop.
I'll use the vice method to do the delidding. I'm kind of worried because my vice has rough edges so it might not grip the IHS enough.

Wish me luck!
     
CPUMotherboardGraphicsHard Drive
Amd Athlon 64 3200+ Asus K8U-X Radeon HD 3850 AGP Samsung SpinPoint F1  
Hard DrivePowerCaseMouse
Seagate Barracuda 7200RPM Corsair TX750W Nexus Breeze Logitech G400 
Mouse PadAudioAudioAudio
Allsop Peace Creative Sound Blaster X-Fi Xtreme Audio Creative Gigaworks T3 Sennheiser PC 360 
CPUMotherboardGraphicsRAM
Intel Core i7-3770k Asus P8Z77-V Pro Club3D R9 290X Battlefield 4 Edition Corsair Vengeance 2x4gb 1600mhz cl9 
Hard DriveHard DriveCoolingCooling
Western Digital Black 4TB Samsung 830 128gb NexXxoS UT60 Full Copper 240 NexXxoS UT60 Full Copper 360 
CoolingCoolingCoolingCooling
EK-D5 Vario X-RES 140 EK-FC R9-290X - Acetal + Nickel Full Cover EK-FC R9-290X Backplate EK-Supremacy Acetal + Nickel 
CoolingCoolingCoolingOS
EK ZMT 16/10MM tubing 5x Scythe Gentlle typhoon 1850rpm 10x EK-CSQ Fitting 10/16mm Windows 8 Pro English 64-bit 
MonitorMonitorKeyboardPower
Acer V233h BenQ XL2430T Ducky Shine 2 Corsair AX850 
CaseMouseMouse PadAudio
Corsair Carbide Air 540 Ninox Aurora Roccat Taito King-size 3mm Sennheiser PC 360 
AudioOther
Creative Gigaworks T3 Creative Soundblaster X-Fi Audio 
  hide details  
Reply
     
CPUMotherboardGraphicsHard Drive
Amd Athlon 64 3200+ Asus K8U-X Radeon HD 3850 AGP Samsung SpinPoint F1  
Hard DrivePowerCaseMouse
Seagate Barracuda 7200RPM Corsair TX750W Nexus Breeze Logitech G400 
Mouse PadAudioAudioAudio
Allsop Peace Creative Sound Blaster X-Fi Xtreme Audio Creative Gigaworks T3 Sennheiser PC 360 
CPUMotherboardGraphicsRAM
Intel Core i7-3770k Asus P8Z77-V Pro Club3D R9 290X Battlefield 4 Edition Corsair Vengeance 2x4gb 1600mhz cl9 
Hard DriveHard DriveCoolingCooling
Western Digital Black 4TB Samsung 830 128gb NexXxoS UT60 Full Copper 240 NexXxoS UT60 Full Copper 360 
CoolingCoolingCoolingCooling
EK-D5 Vario X-RES 140 EK-FC R9-290X - Acetal + Nickel Full Cover EK-FC R9-290X Backplate EK-Supremacy Acetal + Nickel 
CoolingCoolingCoolingOS
EK ZMT 16/10MM tubing 5x Scythe Gentlle typhoon 1850rpm 10x EK-CSQ Fitting 10/16mm Windows 8 Pro English 64-bit 
MonitorMonitorKeyboardPower
Acer V233h BenQ XL2430T Ducky Shine 2 Corsair AX850 
CaseMouseMouse PadAudio
Corsair Carbide Air 540 Ninox Aurora Roccat Taito King-size 3mm Sennheiser PC 360 
AudioOther
Creative Gigaworks T3 Creative Soundblaster X-Fi Audio 
  hide details  
Reply
post #18668 of 33548
Good luck - and you can use a soft-ish material to protect that PCB fromt he vice.
post #18669 of 33548
I would just put some tape over the vise where it will grip the IHS
Black Baby
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3770K Asus Maximus V Formula Asus DirectCU II 7970 16 GB Corsair Dominator 
Hard DriveOptical DriveCoolingOS
OCZ Vector x2 Raid 0 None XIGMATEK Dark Knight (2 blue fans) Windows 7 Ultimate 64 Bit 
MonitorKeyboardPowerCase
ASUS VS278Q-P 27 Inch Razer Chroma Ultra X4 1050 Watt Antec Twelve Hundred (with blue window tint mod) 
MouseMouse PadAudioOther
Razer Imperator (blue) HyperX Fury Pro Asus Onboard Ideazon Fang Gaming Keypad 
  hide details  
Reply
Black Baby
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3770K Asus Maximus V Formula Asus DirectCU II 7970 16 GB Corsair Dominator 
Hard DriveOptical DriveCoolingOS
OCZ Vector x2 Raid 0 None XIGMATEK Dark Knight (2 blue fans) Windows 7 Ultimate 64 Bit 
MonitorKeyboardPowerCase
ASUS VS278Q-P 27 Inch Razer Chroma Ultra X4 1050 Watt Antec Twelve Hundred (with blue window tint mod) 
MouseMouse PadAudioOther
Razer Imperator (blue) HyperX Fury Pro Asus Onboard Ideazon Fang Gaming Keypad 
  hide details  
Reply
post #18670 of 33548
I tried the vise method on my third delid. Ended up just finishing it off with a razor. I think my vise was too old and beat up, it marred the IHS pretty bad, a couple of indentations that had to be lapped down smooth for the cooler to sit flat. I even put a double layer of gorilla tape on either side of the vise to make it less rugged, but it didn't seem to work for me. I never found the razor method very challenging or dangerous so I'm just going to stick to that method. Takes about a minute to get the actual IHS off, and about 5 more minutes to clean off all the adhesive.

I admire the vise method, and I think it's pretty cool, but it's just not for me.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide