Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 1887

post #18861 of 33576
Quote:
Originally Posted by L36 View Post




Applied some black gasket on the resistors, this is NAPA black liquid gasket which can withstand high temperatures without melting, sensor safe and pretty much rubber so will isolate the resistors from CLU. will mount tonight after it dries a bit more with CLU, my WC gear should be here tomorrow.

I have pulled my cpu apart a few times with clp and clu on it and have never found any but where i applied it. I wouldnt worry about ot running or squeezing out because the layer applied should be pretty thin. If you are un coordinated with the brush it may be a diff matter.
post #18862 of 33576
Quote:
Originally Posted by chronicfx View Post

I have pulled my cpu apart a few times with clp and clu on it and have never found any but where i applied it. I wouldnt worry about ot running or squeezing out because the layer applied should be pretty thin. If you are un coordinated with the brush it may be a diff matter.
Its a safety precaution.
What
(12 items)
 
  
CPUMotherboardGraphicsRAM
i7-6950X X99 Deluxe ASUS GTX Titan Black 32GB @ 3200 
Hard DriveOSMonitorKeyboard
Samsung 960 Pro Windows 10 Pro x64 Dell UltraSharp U3014 Microsoft SideWinder X4 
PowerCaseMouseAudio
Corsair AX860 NZXT Switch 810 Mionix Castor Asus Xonar STX + 2x LME49860NA OPs + HD650s 
  hide details  
Reply
What
(12 items)
 
  
CPUMotherboardGraphicsRAM
i7-6950X X99 Deluxe ASUS GTX Titan Black 32GB @ 3200 
Hard DriveOSMonitorKeyboard
Samsung 960 Pro Windows 10 Pro x64 Dell UltraSharp U3014 Microsoft SideWinder X4 
PowerCaseMouseAudio
Corsair AX860 NZXT Switch 810 Mionix Castor Asus Xonar STX + 2x LME49860NA OPs + HD650s 
  hide details  
Reply
post #18863 of 33576
Quote:
Originally Posted by chronicfx View Post

I have pulled my cpu apart a few times with clp and clu on it and have never found any but where i applied it. I wouldnt worry about ot running or squeezing out because the layer applied should be pretty thin. If you are un coordinated with the brush it may be a diff matter.
^^^ very true i have also taken my chip apart many times and the clp i put on is always where i left it. tongue.gif but just to be safe i would just put mx-4 over them transitors.
Daily Rig
(21 items)
 
Bench Setup
(19 items)
 
 
CPUMotherboardGraphicsRAM
5820k 4.7Ghz @ 1.28vcore / 1.88vccin Gigabyte x99 SOC Champion EVGA GTX 1080Ti G.SKILL Trident Z 32GB 3200Mhz CL14 
Hard DriveHard DriveHard DriveHard Drive
2x Intel 520 120Gb SSD in RAID 0  Intel 180Gb 530 SSD OS Drive 2Tb WD HDD  2x Intel 730 SSD 480GB in RAID 0 
CoolingCoolingCoolingCooling
2x HWLabs GTX360 Black Ice in Push Pull EK blocks for CPU / GPU's 6x corsair sp120 2350RPM 6x Ek Vardar 120 F4's 2200rpm  
OSMonitorKeyboardPower
windows 10 XB270HU 2560x1440 - 144Hz - G-sync Razor blackwidow cooler master V1000 
CaseMouseMouse PadAudio
Corsair 780T EVGA TORQ x10 evga mouse pad 2.1 audio / Hyper X cloud II / Sennheiser Gam... 
Other
EK pump / res 
CPUMotherboardGraphicsGraphics
6600k Z170M OC Formula GTX780Ti AMD HD6450 
RAMHard DriveHard DriveHard Drive
Trident Z 3600Mhz cl16 2x8GB 120Gb intel 520 120Gb intel 520 64Gb adata ssd  
Hard DriveOptical DriveCoolingCooling
750Gb WD Black Sony  F1 Gemini CPU Pot Tek - 9 Fat 
CoolingOSMonitorPower
custom loop two 240rad's xp,W7,W8,W10 x-star 2560x1440  Rosewill Quark-650 Platinum / Antec HCP-850 Pla... 
CaseMouseMouse Pad
Dimastech Mini V1.0 black razor abyssus Razor 
  hide details  
Reply
Daily Rig
(21 items)
 
Bench Setup
(19 items)
 
 
CPUMotherboardGraphicsRAM
5820k 4.7Ghz @ 1.28vcore / 1.88vccin Gigabyte x99 SOC Champion EVGA GTX 1080Ti G.SKILL Trident Z 32GB 3200Mhz CL14 
Hard DriveHard DriveHard DriveHard Drive
2x Intel 520 120Gb SSD in RAID 0  Intel 180Gb 530 SSD OS Drive 2Tb WD HDD  2x Intel 730 SSD 480GB in RAID 0 
CoolingCoolingCoolingCooling
2x HWLabs GTX360 Black Ice in Push Pull EK blocks for CPU / GPU's 6x corsair sp120 2350RPM 6x Ek Vardar 120 F4's 2200rpm  
OSMonitorKeyboardPower
windows 10 XB270HU 2560x1440 - 144Hz - G-sync Razor blackwidow cooler master V1000 
CaseMouseMouse PadAudio
Corsair 780T EVGA TORQ x10 evga mouse pad 2.1 audio / Hyper X cloud II / Sennheiser Gam... 
Other
EK pump / res 
CPUMotherboardGraphicsGraphics
6600k Z170M OC Formula GTX780Ti AMD HD6450 
RAMHard DriveHard DriveHard Drive
Trident Z 3600Mhz cl16 2x8GB 120Gb intel 520 120Gb intel 520 64Gb adata ssd  
Hard DriveOptical DriveCoolingCooling
750Gb WD Black Sony  F1 Gemini CPU Pot Tek - 9 Fat 
CoolingOSMonitorPower
custom loop two 240rad's xp,W7,W8,W10 x-star 2560x1440  Rosewill Quark-650 Platinum / Antec HCP-850 Pla... 
CaseMouseMouse Pad
Dimastech Mini V1.0 black razor abyssus Razor 
  hide details  
Reply
post #18864 of 33576
Quote:
Originally Posted by L36 View Post

Its a safety precaution.

A good plan, that murphy guy can be a bit of a dick when you get used to things working smoothly & then cut a corner.
    
CPUMotherboardGraphicsRAM
i7 990x/3930k/3770k/4770k GB x58a-OC/Asus RIVE/x79 gd65/z77 mpower/z77 MV... gtx480s/gtx580s/7970s/680s/Titan Hyper/PSC/BBSE/Hynix/Samsung 
Hard DriveOptical DriveCoolingOS
HDDs/SSDs DVD Air/water/phase/copper pot Windowz 
MonitorKeyboardPowerCase
samsung 2320 Razer Lycosa ax1200 carboard box 
Mouse
Trackball 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 990x/3930k/3770k/4770k GB x58a-OC/Asus RIVE/x79 gd65/z77 mpower/z77 MV... gtx480s/gtx580s/7970s/680s/Titan Hyper/PSC/BBSE/Hynix/Samsung 
Hard DriveOptical DriveCoolingOS
HDDs/SSDs DVD Air/water/phase/copper pot Windowz 
MonitorKeyboardPowerCase
samsung 2320 Razer Lycosa ax1200 carboard box 
Mouse
Trackball 
  hide details  
Reply
post #18865 of 33576
I've done some testing on the i7-4770k before delidding, and the results are nothing short of shocking, temperature-wise:

For a very modest 4.3GHz overclock:

Running at 1.15V:

Core 1: 83°C
Core 2: 82°C
Core 3: 79°C
Core 4: 69°C
Package: 83°C

Running at 1.2V:

Core 1: 89°C
Core 2: 89°C
Core 3: 86°C
Core 4: 75°C
Package: 90°C

Cooling: Corsair H100i, stock fans, running at 100%.
Voltage Control: Manual, CPU-Z reported no deviation during testing.
Tested with: IntelBurnTestV2

Screenies:




Needless to say, this has me somewhat disappointed...

As soon as my new syringes of CLP get here, it'll be off with his head!

Edit: Updated post with all relevant info I could think of, for future reference.
Edited by Leyaena - 6/4/13 at 4:23pm
Behemoth
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 5960x Rampage V Extreme Titan X Pascal Corsair Vengeance LPX [16GB DDR4 @ 2666MHz] 
Hard DriveHard DriveCoolingOS
Samsung 950 Pro M.2 512GB Synology NAS [10 drives] Custom loop [mostly EKWB] Windows 10 Pro 
MonitorMonitorKeyboardPower
ASUS PG279Q Dell UltraSharp UP2716D Das Keyboard Professional 4 Corsair HX1200i 
CaseMouseOtherOther
Phanteks Enthoo Primo Logitech G900 Beyerdynamic Custom One Pro Rode NT-USB 
  hide details  
Reply
Behemoth
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 5960x Rampage V Extreme Titan X Pascal Corsair Vengeance LPX [16GB DDR4 @ 2666MHz] 
Hard DriveHard DriveCoolingOS
Samsung 950 Pro M.2 512GB Synology NAS [10 drives] Custom loop [mostly EKWB] Windows 10 Pro 
MonitorMonitorKeyboardPower
ASUS PG279Q Dell UltraSharp UP2716D Das Keyboard Professional 4 Corsair HX1200i 
CaseMouseOtherOther
Phanteks Enthoo Primo Logitech G900 Beyerdynamic Custom One Pro Rode NT-USB 
  hide details  
Reply
post #18866 of 33576
What cooling? Did you make sure to use Manual voltage?

Also; Why are people using CLP a lot? I thought CLU was better
Insert Name Here
(14 items)
 
  
CPUMotherboardGraphicsRAM
6700k Asus Maximus VIII Hero Gigabyte G1 980 Corsair LPX 2x8GB 3200c16 
Hard DriveHard DriveCoolingOS
Old Seagate HDD Samsung 850 EVO Thermalright Silver Arrow SB-E SE Windows 7 Home Premium 64 bit 
MonitorKeyboardPowerCase
Asus PG258Q (240hz + Gsync) WASDKeyboards.com v1 semi custom w/ mx browns, ... Superflower Golden Green HX550 Air540 
MouseMouse Pad
Logitech G Pro Qck+ 
  hide details  
Reply
Insert Name Here
(14 items)
 
  
CPUMotherboardGraphicsRAM
6700k Asus Maximus VIII Hero Gigabyte G1 980 Corsair LPX 2x8GB 3200c16 
Hard DriveHard DriveCoolingOS
Old Seagate HDD Samsung 850 EVO Thermalright Silver Arrow SB-E SE Windows 7 Home Premium 64 bit 
MonitorKeyboardPowerCase
Asus PG258Q (240hz + Gsync) WASDKeyboards.com v1 semi custom w/ mx browns, ... Superflower Golden Green HX550 Air540 
MouseMouse Pad
Logitech G Pro Qck+ 
  hide details  
Reply
post #18867 of 33576
Quote:
Originally Posted by Cyro999 View Post

What cooling? Did you make sure to use Manual voltage?

I've got a Corsair H100i in there, stock fans, while I wait for my loop's parts to arrive.
Fans were running at 100% during testing.

Voltage was set to manual, both for 1.15V and 1.2V.

Personally I've always preferred CLP, CLU's a bit easier to work with from what I heard, but last I checked CLP's got a small edge temps-wise.
Edited by Leyaena - 6/4/13 at 4:03pm
Behemoth
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 5960x Rampage V Extreme Titan X Pascal Corsair Vengeance LPX [16GB DDR4 @ 2666MHz] 
Hard DriveHard DriveCoolingOS
Samsung 950 Pro M.2 512GB Synology NAS [10 drives] Custom loop [mostly EKWB] Windows 10 Pro 
MonitorMonitorKeyboardPower
ASUS PG279Q Dell UltraSharp UP2716D Das Keyboard Professional 4 Corsair HX1200i 
CaseMouseOtherOther
Phanteks Enthoo Primo Logitech G900 Beyerdynamic Custom One Pro Rode NT-USB 
  hide details  
Reply
Behemoth
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 5960x Rampage V Extreme Titan X Pascal Corsair Vengeance LPX [16GB DDR4 @ 2666MHz] 
Hard DriveHard DriveCoolingOS
Samsung 950 Pro M.2 512GB Synology NAS [10 drives] Custom loop [mostly EKWB] Windows 10 Pro 
MonitorMonitorKeyboardPower
ASUS PG279Q Dell UltraSharp UP2716D Das Keyboard Professional 4 Corsair HX1200i 
CaseMouseOtherOther
Phanteks Enthoo Primo Logitech G900 Beyerdynamic Custom One Pro Rode NT-USB 
  hide details  
Reply
post #18868 of 33576
I've seen similar temps to yours (90c@1.2v on h100i) but also far lower. I thought a lot of it was down to people using adaptive voltage (which overvolts a ton if using avx instructions or something like that) creating a massive temperature gap, but concerning if you dont have that problem
Insert Name Here
(14 items)
 
  
CPUMotherboardGraphicsRAM
6700k Asus Maximus VIII Hero Gigabyte G1 980 Corsair LPX 2x8GB 3200c16 
Hard DriveHard DriveCoolingOS
Old Seagate HDD Samsung 850 EVO Thermalright Silver Arrow SB-E SE Windows 7 Home Premium 64 bit 
MonitorKeyboardPowerCase
Asus PG258Q (240hz + Gsync) WASDKeyboards.com v1 semi custom w/ mx browns, ... Superflower Golden Green HX550 Air540 
MouseMouse Pad
Logitech G Pro Qck+ 
  hide details  
Reply
Insert Name Here
(14 items)
 
  
CPUMotherboardGraphicsRAM
6700k Asus Maximus VIII Hero Gigabyte G1 980 Corsair LPX 2x8GB 3200c16 
Hard DriveHard DriveCoolingOS
Old Seagate HDD Samsung 850 EVO Thermalright Silver Arrow SB-E SE Windows 7 Home Premium 64 bit 
MonitorKeyboardPowerCase
Asus PG258Q (240hz + Gsync) WASDKeyboards.com v1 semi custom w/ mx browns, ... Superflower Golden Green HX550 Air540 
MouseMouse Pad
Logitech G Pro Qck+ 
  hide details  
Reply
post #18869 of 33576
Quote:
Originally Posted by L36 View Post

Its a safety precaution.
Quote:
Originally Posted by FtW 420 View Post

A good plan, that murphy guy can be a bit of a dick when you get used to things working smoothly & then cut a corner.

...definitely a very wise move - with little cost so why not do it. Also L36, looks like a very clean delidding job and glue clean-up - Congrats thumb.gif
post #18870 of 33576
Quote:
Originally Posted by Leyaena View Post



Personally I've always preferred CLP, CLU's a bit easier to work with from what I heard, but last I checked CLP's got a small edge temps-wise.

Dont want to be a noob here, but can you link CLP and CLU where to buy it.
    
CPUMotherboardGraphicsRAM
i7 4770k 4.5ghz 1.246v Malay L311B203 GigaByte OC Force MSI Geforce GTX 1080 Ti FE Kingston HyperX Beast DDR3 2400 11-13-13-35 
Hard DriveOptical DriveCoolingOS
1t Barracuda and a 250g Samsung 840 SSD SONY Black 18X DVD-ROM Water Cooling Win7 Home Premium 64bit 
MonitorKeyboardPowerCase
HP 24" Widescreen Flat-Panel LCD HD Monitor Razor Black Widow Ultimate Thermaltake Toughpower 1200w Mountain Mods Ascension 
Mouse
WOW mouse 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 4770k 4.5ghz 1.246v Malay L311B203 GigaByte OC Force MSI Geforce GTX 1080 Ti FE Kingston HyperX Beast DDR3 2400 11-13-13-35 
Hard DriveOptical DriveCoolingOS
1t Barracuda and a 250g Samsung 840 SSD SONY Black 18X DVD-ROM Water Cooling Win7 Home Premium 64bit 
MonitorKeyboardPowerCase
HP 24" Widescreen Flat-Panel LCD HD Monitor Razor Black Widow Ultimate Thermaltake Toughpower 1200w Mountain Mods Ascension 
Mouse
WOW mouse 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide