Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 222

post #2211 of 33555
Thread Starter 
For all the people priming at 100C please stop doing so. I know the tjmax is higher but heat damages the hardware just as badly as vcore does. So do your chip a favor and. Let it cool down. That's far far to hot to do stability runs on guys. Love and respect your chips. Could you operate fully at 212 degrees farenheit??
post #2212 of 33555
Quote:
Originally Posted by Blueberryjr View Post

FROM prime, Gaming never really goes over 70c even when xsplit is on but on prime i get around 100c-102c is that safe?

I wouldn't run it more then 95c personally. but how long do you run prime for?

@ Hokies, as far as the Asrock boards... imagine if they started failing? that would suck. lol. Considering how much cheaper they are compared to others, who knows where they cut costs...i don't want to know. lol.
post #2213 of 33555
Quote:
Originally Posted by kgtuning View Post

I wouldn't run it more then 95c personally. but how long do you run prime for?
@ Hokies, as far as the Asrock boards... imagine if they started failing? that would suck. lol. Considering how much cheaper they are compared to others, who knows where they cut costs...i don't want to know. lol.

LoL why i just buy the higher end gigabyte / Asus which ever is best price per performance ratio at the time.. no need to worry lol.
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
post #2214 of 33555
Quote:
Originally Posted by Hokies83 View Post

LoL why i just buy the higher end gigabyte / Asus which ever is best price per performance ratio at the time.. no need to worry lol.

I don't worry but could you imagine? I'm going to run this rig til it blows up. haha
post #2215 of 33555
Give me maybe a month or two but I'll probably be getting a i5-3570k to pair with my i7-3770k .... or should I wait lol. These things aren't difficult to delid after the first so I wouldn't mind IB headroom so far tongue.gif
2012
(20 items)
 
Testing v2.5
(8 items)
 
 
CPUMotherboardGraphicsGraphics
Intel i7-3770k Gigabyte Z77X-UD5H MSI nVidia GTX 670 MSI nVidia GTX 670 
RAMHard DriveHard DriveHard Drive
Patriot Viper Xtreme DIV. 2 Samsung 830 OCZ Vertex 3 MAX IOPS OCZ Vertex 3 
Hard DriveOptical DriveOSOS
Seagate LG BluRay Windows 8 Professional x64 Mac OS X 10.8.1 (Pending) 
OSMonitorKeyboardPower
Fedora 17/Ubuntu 12.04 (Pending) Dell ST2220T Logitech G110 Corsair HX1050 
CaseMouseAudioOther
Corsair 600T Special Edition White Logitech G9x Unknown yet Keyboard: Corsair K90 (Pending) 
CPUMotherboardGraphicsRAM
Intel i5-3570k Asus P8Z77-i Deluxe MSI HD 7950 Samsung 
Hard DriveCoolingOSCase
OCZ Agility 3 Corsair H100i Windows 8 Professional x64 Cardboard box 
  hide details  
Reply
2012
(20 items)
 
Testing v2.5
(8 items)
 
 
CPUMotherboardGraphicsGraphics
Intel i7-3770k Gigabyte Z77X-UD5H MSI nVidia GTX 670 MSI nVidia GTX 670 
RAMHard DriveHard DriveHard Drive
Patriot Viper Xtreme DIV. 2 Samsung 830 OCZ Vertex 3 MAX IOPS OCZ Vertex 3 
Hard DriveOptical DriveOSOS
Seagate LG BluRay Windows 8 Professional x64 Mac OS X 10.8.1 (Pending) 
OSMonitorKeyboardPower
Fedora 17/Ubuntu 12.04 (Pending) Dell ST2220T Logitech G110 Corsair HX1050 
CaseMouseAudioOther
Corsair 600T Special Edition White Logitech G9x Unknown yet Keyboard: Corsair K90 (Pending) 
CPUMotherboardGraphicsRAM
Intel i5-3570k Asus P8Z77-i Deluxe MSI HD 7950 Samsung 
Hard DriveCoolingOSCase
OCZ Agility 3 Corsair H100i Windows 8 Professional x64 Cardboard box 
  hide details  
Reply
post #2216 of 33555
after 2 weeks a have delidded my 3770k , temps started to raise about 30 c!!!

i opened the socket and remove ihs again... my noctua NTH 1 was spreaded all over cpu and the center of cpu was without thermal paste at all!!!

then i decide to pun Coollaboratory liquid ultra....

and boom!!!

I get this results 140 gflops! vcore was 1.52 v!!! and even with that high vcore my temps in linx were max 90 C which is very good!







p.s. i think that this sample of 3770k is not so good , maybe with some other cpu i colud get 5ghz stable in linx with this vcore 1.52v, but i am satisfied because BEFORE REMOVING IHS , I CUOLDNT GET LINX STABLE WHEN VCORE WAS OVER 1.25V !!! AND MY TEMPS WENT TO 100 C !!!
post #2217 of 33555
Has anyone had any adverse results after delidding?
Lil D
(19 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3770 Asrock Z77E-ITX OCUK GTX 980 Samsung 30nm 
Hard DriveHard DriveHard DriveHard Drive
Samsung 830 (256 GB) Samsung 830 (256 GB) 2 TB 3 TB 
CoolingCoolingCoolingCooling
Swiftech Apogee Drive II Coolgate 120 Alphacool ST30 - 240mm XSPC 980 Waterblock 
OSMonitorKeyboardPower
Windows 10 Samsung "32" TV Microsoft Arc EVGA SuperNova G2 750W 
CaseMouseAudio
Enthoo Evolv ITX Microsoft Multimedia Onboard 
  hide details  
Reply
Lil D
(19 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3770 Asrock Z77E-ITX OCUK GTX 980 Samsung 30nm 
Hard DriveHard DriveHard DriveHard Drive
Samsung 830 (256 GB) Samsung 830 (256 GB) 2 TB 3 TB 
CoolingCoolingCoolingCooling
Swiftech Apogee Drive II Coolgate 120 Alphacool ST30 - 240mm XSPC 980 Waterblock 
OSMonitorKeyboardPower
Windows 10 Samsung "32" TV Microsoft Arc EVGA SuperNova G2 750W 
CaseMouseAudio
Enthoo Evolv ITX Microsoft Multimedia Onboard 
  hide details  
Reply
post #2218 of 33555
Thread Starter 
Quote:
Originally Posted by maestrobg View Post

after 2 weeks a have delidded my 3770k , temps started to raise about 30 c!!!
i opened the socket and remove ihs again... my noctua NTH 1 was spreaded all over cpu and the center of cpu was without thermal paste at all!!!
then i decide to pun Coollaboratory liquid ultra....
and boom!!!
I get this results 140 gflops! vcore was 1.52 v!!! and even with that high vcore my temps in linx were max 90 C which is very good!

p.s. i think that this sample of 3770k is not so good , maybe with some other cpu i colud get 5ghz stable in linx with this vcore 1.52v, but i am satisfied because BEFORE REMOVING IHS , I CUOLDNT GET LINX STABLE WHEN VCORE WAS OVER 1.25V !!! AND MY TEMPS WENT TO 100 C !!![/quohear

That's what I like to hear!
Quote:
Originally Posted by Lil-Diabo View Post

Has anyone had any adverse results after delidding?

None so far. Been over a month and physically and technically speaking mechanics wise there shouldn't be any at all.
post #2219 of 33555
Quote:
Originally Posted by Valgaur View Post

For all the people priming at 100C please stop doing so. I know the tjmax is higher but heat damages the hardware just as badly as vcore does. So do your chip a favor and. Let it cool down. That's far far to hot to do stability runs on guys. Love and respect your chips. Could you operate fully at 212 degrees farenheit??

Just got a call (computer is at my dads cause he has power) p95 application stopped working about 3 hours in. Would you say that 5ghz is out of reach for me since i cannot burn it or prime it or should i raise the vcore 2 notches and use it normally until i notice instability?
post #2220 of 33555
Thread Starter 
Quote:
Originally Posted by chronicfx View Post

Just got a call (computer is at my dads cause he has power) p95 application stopped working about 3 hours in. Would you say that 5ghz is out of reach for me since i cannot burn it or prime it or should i raise the vcore 2 notches and use it normally until i notice instability?

What are your temps? If not reaching 90s then yeah bump vcore by .02 or even .03
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide