Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 2465

post #24641 of 33692
Whats peoples load temps after delidding on each individual core?

mine seem to vary a bit between cores

54c
58c
62c
59c

does this seem normal?
The Beast
(14 items)
 
  
CPUMotherboardGraphicsRAM
3770k @ 5.0Ghz MAXIMUS V FORMULA GTX Titan X (Pascal) 16Gb Corsair Vengeance 2400Mhz DDR3 
Hard DriveHard DriveCoolingOS
Sandisk 120Gb X2 Raid 0 (System) Wester digital 2TB 7200rpm (Storage) Custom Watercooling Windows 10 
MonitorKeyboardPowerCase
Dell S2716DG 27" Corasir K70 Rgb Super Flower 1200W Platinum Corsair 900D 
MouseAudio
Corsair M65 Rgb Asus Xonar D2X 
  hide details  
Reply
The Beast
(14 items)
 
  
CPUMotherboardGraphicsRAM
3770k @ 5.0Ghz MAXIMUS V FORMULA GTX Titan X (Pascal) 16Gb Corsair Vengeance 2400Mhz DDR3 
Hard DriveHard DriveCoolingOS
Sandisk 120Gb X2 Raid 0 (System) Wester digital 2TB 7200rpm (Storage) Custom Watercooling Windows 10 
MonitorKeyboardPowerCase
Dell S2716DG 27" Corasir K70 Rgb Super Flower 1200W Platinum Corsair 900D 
MouseAudio
Corsair M65 Rgb Asus Xonar D2X 
  hide details  
Reply
post #24642 of 33692
Quote:
Originally Posted by tpwilko08 View Post

Whats peoples load temps after delidding on each individual core?

mine seem to vary a bit between cores

54c
58c
62c
59c

does this seem normal?

Very normal.

Before I delided mine had a difference of 15c at times. They just never are in sync temperature wise.

What tim did you use on die? And ihs?
Edited by Wirerat - 4/1/14 at 6:53am
Cable box
(24 items)
 
Phat Bits
(16 items)
 
Lament Box
(16 items)
 
CPUMotherboardGraphicsRAM
i7-4790K 4.8ghz @ 1.245v Asus Maximus Hero VI 4GB Asus Strix GTX 980 Gskil Trident 2400 CL10 
Hard DriveHard DriveHard DriveOptical Drive
128GB sandisk extreme SSD 2 tb Western digital media intel 530 128 gb SSD External LG BD RW 
CoolingCoolingCoolingCooling
EK Coolstream 360mm PE Rad  Gentle typhoon AP-15 X 3 Fractal Design 140mm 1000RPM X3 Fractal Design Venturi High Flow Series 140mm F... 
CoolingCoolingCoolingCooling
Bitspower DDC Heatsink Black EK Coolstream XTC 140mm Rad EK Supremecy MX  EK FC980 Strix Water Block 
CoolingCoolingOSKeyboard
swiftech MCP-35X EK XRES 140 DDC Top WIN 7 ULTIMATE smk link 
PowerCaseMouseOther
Seasonic G-750  Fractal Design R5 G700s HDHOMERUN 3 TUNER CABLE CARD 
CPUMotherboardGraphicsRAM
4770k 4.5ghz @1.29v asus z87-A EVGA 4gb GTX 970 FTW 1510mhz 8000mem 1.23v Adata XPG 8GB @ 2400mhz 11-13-13-35-1 
Hard DriveHard DriveCoolingCooling
OCZ VERTEX 3 90GB 1tb 7200 Seagate hybrid  D5 vario Primo chill 120mm D5 Compression Res 
CoolingCoolingCoolingCooling
Swiftech MCR-320 XP 360mm rad Swiftech MCR-320 XP 120mm rad EK Supreme LTX Cpu block Biitspower ACX GTX 970 Water block 
OSKeyboardPowerCase
win7 64bit ultimate G13 Seasonic M211 620 watt Nzxt Guardian 
  hide details  
Reply
Cable box
(24 items)
 
Phat Bits
(16 items)
 
Lament Box
(16 items)
 
CPUMotherboardGraphicsRAM
i7-4790K 4.8ghz @ 1.245v Asus Maximus Hero VI 4GB Asus Strix GTX 980 Gskil Trident 2400 CL10 
Hard DriveHard DriveHard DriveOptical Drive
128GB sandisk extreme SSD 2 tb Western digital media intel 530 128 gb SSD External LG BD RW 
CoolingCoolingCoolingCooling
EK Coolstream 360mm PE Rad  Gentle typhoon AP-15 X 3 Fractal Design 140mm 1000RPM X3 Fractal Design Venturi High Flow Series 140mm F... 
CoolingCoolingCoolingCooling
Bitspower DDC Heatsink Black EK Coolstream XTC 140mm Rad EK Supremecy MX  EK FC980 Strix Water Block 
CoolingCoolingOSKeyboard
swiftech MCP-35X EK XRES 140 DDC Top WIN 7 ULTIMATE smk link 
PowerCaseMouseOther
Seasonic G-750  Fractal Design R5 G700s HDHOMERUN 3 TUNER CABLE CARD 
CPUMotherboardGraphicsRAM
4770k 4.5ghz @1.29v asus z87-A EVGA 4gb GTX 970 FTW 1510mhz 8000mem 1.23v Adata XPG 8GB @ 2400mhz 11-13-13-35-1 
Hard DriveHard DriveCoolingCooling
OCZ VERTEX 3 90GB 1tb 7200 Seagate hybrid  D5 vario Primo chill 120mm D5 Compression Res 
CoolingCoolingCoolingCooling
Swiftech MCR-320 XP 360mm rad Swiftech MCR-320 XP 120mm rad EK Supreme LTX Cpu block Biitspower ACX GTX 970 Water block 
OSKeyboardPowerCase
win7 64bit ultimate G13 Seasonic M211 620 watt Nzxt Guardian 
  hide details  
Reply
post #24643 of 33692
8 degree difference isnt unusual, and I wouldn't worry about it.
I got lucky with mine and only see 2-3 degrees difference between hottest and coldest (under load) thumb.gif
 
My Old Machine
(8 items)
 
 
CPUMotherboardGraphicsRAM
Haswell i5 4670K @ 4.6GHz MSI Z87-GD65 Gamer EVGA GTX780 SC ACX + XSPC Razor Corsair Dominator 2 x 8 GB 1866 MHz CL9 1.5V 
Hard DriveHard DriveCoolingOS
Samsung 830 Series 120 GB Samsung 840Pro Series 256 GB Custom Loop (See Build Log) Win7 Ultimate 64bit 
MonitorKeyboardPowerCase
Samsung Syncmaster P2350 Logitech G710+ Corsair AX760 CoolerMaster HAF XB 
MouseMouse Pad
Logitech G5 Func 1030XL 
CPUMotherboardGraphicsRAM
Q6600 Core 2 Quad 65nm MSI P35 Platinum XFX GTX275 Core Edition OcZ Dual ch PC6400 4GB kit 
Hard DriveOSPower
1TB Sata 2 Windows 7, Ultimate - 64 bit TT Toughpower 750W 
  hide details  
Reply
 
My Old Machine
(8 items)
 
 
CPUMotherboardGraphicsRAM
Haswell i5 4670K @ 4.6GHz MSI Z87-GD65 Gamer EVGA GTX780 SC ACX + XSPC Razor Corsair Dominator 2 x 8 GB 1866 MHz CL9 1.5V 
Hard DriveHard DriveCoolingOS
Samsung 830 Series 120 GB Samsung 840Pro Series 256 GB Custom Loop (See Build Log) Win7 Ultimate 64bit 
MonitorKeyboardPowerCase
Samsung Syncmaster P2350 Logitech G710+ Corsair AX760 CoolerMaster HAF XB 
MouseMouse Pad
Logitech G5 Func 1030XL 
CPUMotherboardGraphicsRAM
Q6600 Core 2 Quad 65nm MSI P35 Platinum XFX GTX275 Core Edition OcZ Dual ch PC6400 4GB kit 
Hard DriveOSPower
1TB Sata 2 Windows 7, Ultimate - 64 bit TT Toughpower 750W 
  hide details  
Reply
post #24644 of 33692
Quote:
Originally Posted by Wirerat View Post

Very normal.

Before I delided mine had a difference of 15c at times. They just never are in sync temperature wise.

What tim did you use on die? And ihs?

I used clp on the die and antec diamond 7 on the ihs. Not that am complaining about the temps just thought it was strange.

this is at 5ghz 1.31 volts.
The Beast
(14 items)
 
  
CPUMotherboardGraphicsRAM
3770k @ 5.0Ghz MAXIMUS V FORMULA GTX Titan X (Pascal) 16Gb Corsair Vengeance 2400Mhz DDR3 
Hard DriveHard DriveCoolingOS
Sandisk 120Gb X2 Raid 0 (System) Wester digital 2TB 7200rpm (Storage) Custom Watercooling Windows 10 
MonitorKeyboardPowerCase
Dell S2716DG 27" Corasir K70 Rgb Super Flower 1200W Platinum Corsair 900D 
MouseAudio
Corsair M65 Rgb Asus Xonar D2X 
  hide details  
Reply
The Beast
(14 items)
 
  
CPUMotherboardGraphicsRAM
3770k @ 5.0Ghz MAXIMUS V FORMULA GTX Titan X (Pascal) 16Gb Corsair Vengeance 2400Mhz DDR3 
Hard DriveHard DriveCoolingOS
Sandisk 120Gb X2 Raid 0 (System) Wester digital 2TB 7200rpm (Storage) Custom Watercooling Windows 10 
MonitorKeyboardPowerCase
Dell S2716DG 27" Corasir K70 Rgb Super Flower 1200W Platinum Corsair 900D 
MouseAudio
Corsair M65 Rgb Asus Xonar D2X 
  hide details  
Reply
post #24645 of 33692






9/10 of the TIM on my new 4770k was outside the die, sorry for the lighting but there was barely any left on the die. Last pic is the Liquid Ultra, and I can't wait to hook up the water loop to make sure it still works. I highly recommend the vise method, if a klutz like me can do it.
post #24646 of 33692
Quote:
Originally Posted by Zyzzyx View Post







9/10 of the TIM on my new 4770k was outside the die, sorry for the lighting but there was barely any left on the die. Last pic is the Liquid Ultra, and I can't wait to hook up the water loop to make sure it still works. I highly recommend the vise method, if a klutz like me can do it.

Did you use the vise only without wood or hammer?
The Beast
(14 items)
 
  
CPUMotherboardGraphicsRAM
3770k @ 5.0Ghz MAXIMUS V FORMULA GTX Titan X (Pascal) 16Gb Corsair Vengeance 2400Mhz DDR3 
Hard DriveHard DriveCoolingOS
Sandisk 120Gb X2 Raid 0 (System) Wester digital 2TB 7200rpm (Storage) Custom Watercooling Windows 10 
MonitorKeyboardPowerCase
Dell S2716DG 27" Corasir K70 Rgb Super Flower 1200W Platinum Corsair 900D 
MouseAudio
Corsair M65 Rgb Asus Xonar D2X 
  hide details  
Reply
The Beast
(14 items)
 
  
CPUMotherboardGraphicsRAM
3770k @ 5.0Ghz MAXIMUS V FORMULA GTX Titan X (Pascal) 16Gb Corsair Vengeance 2400Mhz DDR3 
Hard DriveHard DriveCoolingOS
Sandisk 120Gb X2 Raid 0 (System) Wester digital 2TB 7200rpm (Storage) Custom Watercooling Windows 10 
MonitorKeyboardPowerCase
Dell S2716DG 27" Corasir K70 Rgb Super Flower 1200W Platinum Corsair 900D 
MouseAudio
Corsair M65 Rgb Asus Xonar D2X 
  hide details  
Reply
post #24647 of 33692
Quote:
Originally Posted by tpwilko08 View Post

Did you use the vise only without wood or hammer?
Sorry, nope! That thing was oooon there. I used a regular hammer and a fairly small piece of wood. Maybe a 1x1 piece about a foot and a half long. I had to hit pretty dang hard before it broke free.
post #24648 of 33692
Quote:
Originally Posted by Zyzzyx View Post

Sorry, nope! That thing was oooon there. I used a regular hammer and a fairly small piece of wood. Maybe a 1x1 piece about a foot and a half long. I had to hit pretty dang hard before it broke free.

I did it the vise only way, turned the cpu upside down had one of the sides of the vise on the pcb and the other on the ihs and turned it till it popped off worked a treat. I had a test cpu that i bought for £3 lol and did it on that first.....
The Beast
(14 items)
 
  
CPUMotherboardGraphicsRAM
3770k @ 5.0Ghz MAXIMUS V FORMULA GTX Titan X (Pascal) 16Gb Corsair Vengeance 2400Mhz DDR3 
Hard DriveHard DriveCoolingOS
Sandisk 120Gb X2 Raid 0 (System) Wester digital 2TB 7200rpm (Storage) Custom Watercooling Windows 10 
MonitorKeyboardPowerCase
Dell S2716DG 27" Corasir K70 Rgb Super Flower 1200W Platinum Corsair 900D 
MouseAudio
Corsair M65 Rgb Asus Xonar D2X 
  hide details  
Reply
The Beast
(14 items)
 
  
CPUMotherboardGraphicsRAM
3770k @ 5.0Ghz MAXIMUS V FORMULA GTX Titan X (Pascal) 16Gb Corsair Vengeance 2400Mhz DDR3 
Hard DriveHard DriveCoolingOS
Sandisk 120Gb X2 Raid 0 (System) Wester digital 2TB 7200rpm (Storage) Custom Watercooling Windows 10 
MonitorKeyboardPowerCase
Dell S2716DG 27" Corasir K70 Rgb Super Flower 1200W Platinum Corsair 900D 
MouseAudio
Corsair M65 Rgb Asus Xonar D2X 
  hide details  
Reply
post #24649 of 33692
Quote:
Originally Posted by tpwilko08 View Post

I did it the vise only way, turned the cpu upside down had one of the sides of the vise on the pcb and the other on the ihs and turned it till it popped off worked a treat. I had a test cpu that i bought for £3 lol and did it on that first.....

good.
from first timer to first timer, a practice chip is always a good thing.
a few tips:
make sure that you dont grip it from the base, theres a protrusion closer to the PCB, do not grip it there. Grip it from the top of the IHS
Contrary to popular assumption, force is required. I tapped mine a little, and all i did was damage the IHS and make it so i had to use a dremel to mirror it. It damaged my NH-D14 cooler a little too...
DO NOT GLUE THE IHS BACK ON. RESOCKET THE CHIP WITH THE IHS LOOSE. make sure it is centered, but do not glue it. The best way is to just put the chip in the socket without the IHS, then proceed to putting TIM on and then and only then putting the IHS back on. When you close the socket, press down on the IHS hard enough so it doesnt move and clip the whole thing in the socket. Then, slap ya cooler on and go crazy with OC. I got mine to 4.8 with a crapload of headroom without a problem.

Good luck and dont break the glass.
Frankenstein
(20 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-3770k MSI Z77-GD65 Gaming Asus GTX 660 DirectCU II OC Kingston HyperX Beast 
Hard DriveHard DriveHard DriveHard Drive
Western Digital Blue EZEX Seagate Barracuda Western Digital Black FZEX Seagate Barracuda  
Hard DriveOptical DriveCoolingOS
kingston HyperX 3k LG Noctua NH-D14 Windows 7 Home Premium sp1 
OSOSMonitorMonitor
Kubuntu 13.01 SteamOS Alchemist Samsung SyncMaster S27B350 Samsung SyncMaster S27B370 
KeyboardPowerCaseMouse
Cooler Master Storm QuickFire Pro Corsair TX850  Cooler Master Storm Trooper Logitech G600 
  hide details  
Reply
Frankenstein
(20 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-3770k MSI Z77-GD65 Gaming Asus GTX 660 DirectCU II OC Kingston HyperX Beast 
Hard DriveHard DriveHard DriveHard Drive
Western Digital Blue EZEX Seagate Barracuda Western Digital Black FZEX Seagate Barracuda  
Hard DriveOptical DriveCoolingOS
kingston HyperX 3k LG Noctua NH-D14 Windows 7 Home Premium sp1 
OSOSMonitorMonitor
Kubuntu 13.01 SteamOS Alchemist Samsung SyncMaster S27B350 Samsung SyncMaster S27B370 
KeyboardPowerCaseMouse
Cooler Master Storm QuickFire Pro Corsair TX850  Cooler Master Storm Trooper Logitech G600 
  hide details  
Reply
post #24650 of 33692
Delidded 4770K that was destroyed due to bad power supply.
I delidded this 4770K about a month ago and have been putting together my build for a bit now.
A bad PSU took out my mobo, fan controller, and CPU.

The mobo I bought didn't work so took it back to NCIX and upon inspection the employee pointed out a black spot on the PCB.
Upon closer inspection inside I could see that the die was scorched in multiple places and the CPU was dead.

I contacted Intel about it. They asked me some info on the CPU like S/N and etc. within 4 hours of setting up a RMA ticket a representative gave me a call about my credit card info.
I chose the cross shipping method wich was they send me a new chip with $25 expense for shipping it to me and prepaid post to ship the bad unit back to them also a deposit for the price of the CPU in case I didn't ship back the bad one.
I had a new 4770K at my door steps within 24 hours. Best customer service yet! I simply epoxyed the CPU back together and shipped it back to them.
Within 2 days I got an email saying they received my CPU and that the refund process was already in progress.
They never asked me about delidding and never asked me a thing once the CPU was back with them.

Once the new CPU arrived I delidded it once more and put it back in my build.


Here you can see the burnt area on the die



And under the PCB



There was even a fracture on the die after I cleaned it up for inspection.



New CPU!



I used the razor method last time but decided to use the vice method this time. It was easier, faster, and less messy.
Hand was so shacky after hammering at the CPU that I couldn't take a steady photo haha



All cleaned up



Ready to go back into the build. Used liquid pro as TIM



Almost finished build biggrin.gif Just need the PSU to come back from RMA as well.



Unfortunately I won't be able to see how much the temp dropped on this chip after delidding as I was never able to check the temps before delidding.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide