Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 2476

post #24751 of 33641

Fingernail polish also works wonderful.. I have CLLP on my 750Ti right now, with Fingernail polish protecting the circuitry. No issues as of yet :-)

P.s. Everything I use has Fingernail polish protecting the circuits. That being 5 GPUS and 2 CPUs, and it costed a $1.99 and didn't need to be shipped since you can buy it.. anywhere.
TH10A
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 5960x Rampage V Extreme 2x EVGA 980Ti Classified 32gb GSkill Ripjaws 4 2400mhz 
Hard DriveHard DriveHard DriveHard Drive
2x Samsung 840 EVO Seagate 3 TB 7200 rpm Seagate 2tb 7200rpm Intel 430 256gb 
CoolingCoolingOSKeyboard
Custom Loop - EK Fittings Too many Radiators Win 10 Das Keyboard Pro S 
PowerCaseMouseMouse Pad
2x EVGA 1300w G2 CaseLabs TH10A Corsair G65 RGB Corsair Large scale pads 
  hide details  
Reply
TH10A
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 5960x Rampage V Extreme 2x EVGA 980Ti Classified 32gb GSkill Ripjaws 4 2400mhz 
Hard DriveHard DriveHard DriveHard Drive
2x Samsung 840 EVO Seagate 3 TB 7200 rpm Seagate 2tb 7200rpm Intel 430 256gb 
CoolingCoolingOSKeyboard
Custom Loop - EK Fittings Too many Radiators Win 10 Das Keyboard Pro S 
PowerCaseMouseMouse Pad
2x EVGA 1300w G2 CaseLabs TH10A Corsair G65 RGB Corsair Large scale pads 
  hide details  
Reply
post #24752 of 33641
Quote:
Originally Posted by Scarlet-Tech View Post

Fingernail polish also works wonderful.. I have CLLP on my 750Ti right now, with Fingernail polish protecting the circuitry. No issues as of yet :-)

P.s. Everything I use has Fingernail polish protecting the circuits. That being 5 GPUS and 2 CPUs, and it costed a $1.99 and didn't need to be shipped since you can buy it.. anywhere.

Yeah I just did that...just before I read your post. Works perfectly fine !
post #24753 of 33641
CLU is super super easy to put on the die without making a mess. I didn't bother covering the other stuff under the lid.
post #24754 of 33641
Quote:
Originally Posted by veedubfreak View Post

CLU is super super easy to put on the die without making a mess. I didn't bother covering the other stuff under the lid.

it only takes one mistake to fry your chip, i dont think applying fingernail polish, or a temporary strip of painters tape is a bad investment of time judging by the possible repercussions
Blue540
(14 items)
 
x99
(18 items)
 
B.M.O.
(10 items)
 
CPUMotherboardGraphicsGraphics
6800k ASUS X99-A EVGA 980 FTW ACX 2.0 EVGA 980 FTW ACX2.0 
RAMHard DriveHard DriveCooling
Corsair Vengeance CMK32GX4M4B3200C16W Crucial MX100 WD Blue 1TB EK Supremacy EVO 
CoolingCoolingCoolingOS
EK 480 PE EK 240 PE EK D5 Vario Windows 10 
MonitorKeyboardPowerCase
Samsung 49KU7500 (curved 4k) Corsair K65 NZXT Hale 90 V2 1000W Thermaltake X9 
MouseMouse Pad
Logitch G100S X-Trac Ripper 
CPUMotherboardGraphicsRAM
6400k msi A75MA-P33 Sapphire 6670 passive hynix 2 GB dual channel 
Hard DriveOSMonitorKeyboard
WD  windows 8.1 e-machine wireless 
PowerCase
king win 600w custom built 
  hide details  
Reply
Blue540
(14 items)
 
x99
(18 items)
 
B.M.O.
(10 items)
 
CPUMotherboardGraphicsGraphics
6800k ASUS X99-A EVGA 980 FTW ACX 2.0 EVGA 980 FTW ACX2.0 
RAMHard DriveHard DriveCooling
Corsair Vengeance CMK32GX4M4B3200C16W Crucial MX100 WD Blue 1TB EK Supremacy EVO 
CoolingCoolingCoolingOS
EK 480 PE EK 240 PE EK D5 Vario Windows 10 
MonitorKeyboardPowerCase
Samsung 49KU7500 (curved 4k) Corsair K65 NZXT Hale 90 V2 1000W Thermaltake X9 
MouseMouse Pad
Logitch G100S X-Trac Ripper 
CPUMotherboardGraphicsRAM
6400k msi A75MA-P33 Sapphire 6670 passive hynix 2 GB dual channel 
Hard DriveOSMonitorKeyboard
WD  windows 8.1 e-machine wireless 
PowerCase
king win 600w custom built 
  hide details  
Reply
post #24755 of 33641
Quote:
Originally Posted by inedenimadam View Post

it only takes one mistake to fry your chip, i dont think applying fingernail polish, or a temporary strip of painters tape is a bad investment of time judging by the possible repercussions
Agreed, the very minimal effort of putting a little fingernail polish on is for sure worth it imo.
post #24756 of 33641
Arrow I7
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 6850K 4.4 @3.7 cache Heatkiller IV Pro Asus X99M WS/SE TITAN X Pascal @ Heatkiller IV G.Skill F4-3200C14Q-32GTZSW 
Hard DriveHard DriveCoolingCooling
Intel 750 NVMe 400Gb, 2500Pro 180Gb Crucial MX300 750Gb LE, 2x Barracuda 3Tb Cooled by EKWB, Watercool, Alphacool, Koolance XSPC RX360 v3, 2x240 rads 
MonitorKeyboardPowerCase
Acer Predator XB271HU G.Skill Ripjaws KM780 RGB SuperFlower Titanium 1000W Phanteks Enthoo Mini XL 
Mouse
Logitech G602 
  hide details  
Reply
Arrow I7
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 6850K 4.4 @3.7 cache Heatkiller IV Pro Asus X99M WS/SE TITAN X Pascal @ Heatkiller IV G.Skill F4-3200C14Q-32GTZSW 
Hard DriveHard DriveCoolingCooling
Intel 750 NVMe 400Gb, 2500Pro 180Gb Crucial MX300 750Gb LE, 2x Barracuda 3Tb Cooled by EKWB, Watercool, Alphacool, Koolance XSPC RX360 v3, 2x240 rads 
MonitorKeyboardPowerCase
Acer Predator XB271HU G.Skill Ripjaws KM780 RGB SuperFlower Titanium 1000W Phanteks Enthoo Mini XL 
Mouse
Logitech G602 
  hide details  
Reply
post #24757 of 33641
Thread Starter 
Someone beat you to the news. Thanks though biggrin.gif was a good read thumb.gif
post #24758 of 33641
I don't know if this happened to anyone but here's what happened to me...

I used CLU between the ihs and heatsink (both lapped), and after nearly 1 year, the heatsink and the ihs nearly fusioned!! I had to use brute force to remove my noctua d14 from the ihs. It was so fusioned, just to give you an idea, I could have removed all mounting, and the heatsink wouldn't have felt. And keep in mind the d14 is freaking heavy. I don't think I'll ever be using liquid metal pastes other than this delid case. Also it stained both of my ihs and d14 very bad, I had to lap them again to remove all the crap.

Consider twice before using liquid metal pastes other than on the die...
junkman
(17 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i7-4770K @ 4600MHz ASUS Z97-A/USB 3.1 HIS R9 280 IceQ X² OC @ 1200/1500MHz HIS R9 280 IceQ X² OC @ 1200/1500MHz 
RAMHard DriveHard DriveHard Drive
G.SKILL F3-2133C9D-16GXH @ 2400MHz 10-12-12-31-1T Crucial MX300 275GB SAMSUNG Spinpoint F3 1TB SAMSUNG Spinpoint F3 1TB 
CoolingCoolingCoolingOS
[CPU] Noctua NH-D14 (NF-P14/NF-P12) [GPU1] Asetek 570LC (Gentle Typhoon AP-30) [GPU2] Asetek 570LC (Gentle Typhoon AP-30) Windows 7 Professional 64-bit 
MonitorMonitorPowerCase
ViewSonic XG2401 Dell UltraSharp U2713H EVGA SuperNOVA 1300 G2 CORSAIR 300R 
Other
Scythe Kaze Q-12 Fan Controller 
  hide details  
Reply
junkman
(17 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i7-4770K @ 4600MHz ASUS Z97-A/USB 3.1 HIS R9 280 IceQ X² OC @ 1200/1500MHz HIS R9 280 IceQ X² OC @ 1200/1500MHz 
RAMHard DriveHard DriveHard Drive
G.SKILL F3-2133C9D-16GXH @ 2400MHz 10-12-12-31-1T Crucial MX300 275GB SAMSUNG Spinpoint F3 1TB SAMSUNG Spinpoint F3 1TB 
CoolingCoolingCoolingOS
[CPU] Noctua NH-D14 (NF-P14/NF-P12) [GPU1] Asetek 570LC (Gentle Typhoon AP-30) [GPU2] Asetek 570LC (Gentle Typhoon AP-30) Windows 7 Professional 64-bit 
MonitorMonitorPowerCase
ViewSonic XG2401 Dell UltraSharp U2713H EVGA SuperNOVA 1300 G2 CORSAIR 300R 
Other
Scythe Kaze Q-12 Fan Controller 
  hide details  
Reply
post #24759 of 33641
Quote:
Originally Posted by mrazster View Post

I´m about to delid my 4770..and I´m going to use CLU between the die and IHS.
However I´m a bit conserned abot the small chips next to the die...I´ve seen some use things as nailpolish, silicon and other stuff.

But have anyone used dielectric siliconbased grease ?

Just be careful and you don't need to cover up anything. I did the delid twice and nothing happened. Plus it doesn't slip like regular paste when you try to put the ihs back (with the retention bracket). I also think it looks very unprofessional when people cover those capacitors with non conductive thermal paste or whatever.
junkman
(17 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i7-4770K @ 4600MHz ASUS Z97-A/USB 3.1 HIS R9 280 IceQ X² OC @ 1200/1500MHz HIS R9 280 IceQ X² OC @ 1200/1500MHz 
RAMHard DriveHard DriveHard Drive
G.SKILL F3-2133C9D-16GXH @ 2400MHz 10-12-12-31-1T Crucial MX300 275GB SAMSUNG Spinpoint F3 1TB SAMSUNG Spinpoint F3 1TB 
CoolingCoolingCoolingOS
[CPU] Noctua NH-D14 (NF-P14/NF-P12) [GPU1] Asetek 570LC (Gentle Typhoon AP-30) [GPU2] Asetek 570LC (Gentle Typhoon AP-30) Windows 7 Professional 64-bit 
MonitorMonitorPowerCase
ViewSonic XG2401 Dell UltraSharp U2713H EVGA SuperNOVA 1300 G2 CORSAIR 300R 
Other
Scythe Kaze Q-12 Fan Controller 
  hide details  
Reply
junkman
(17 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i7-4770K @ 4600MHz ASUS Z97-A/USB 3.1 HIS R9 280 IceQ X² OC @ 1200/1500MHz HIS R9 280 IceQ X² OC @ 1200/1500MHz 
RAMHard DriveHard DriveHard Drive
G.SKILL F3-2133C9D-16GXH @ 2400MHz 10-12-12-31-1T Crucial MX300 275GB SAMSUNG Spinpoint F3 1TB SAMSUNG Spinpoint F3 1TB 
CoolingCoolingCoolingOS
[CPU] Noctua NH-D14 (NF-P14/NF-P12) [GPU1] Asetek 570LC (Gentle Typhoon AP-30) [GPU2] Asetek 570LC (Gentle Typhoon AP-30) Windows 7 Professional 64-bit 
MonitorMonitorPowerCase
ViewSonic XG2401 Dell UltraSharp U2713H EVGA SuperNOVA 1300 G2 CORSAIR 300R 
Other
Scythe Kaze Q-12 Fan Controller 
  hide details  
Reply
post #24760 of 33641
Quote:
Originally Posted by Bartouille View Post

I don't know if this happened to anyone but here's what happened to me...

I used CLU between the ihs and heatsink (both lapped), and after nearly 1 year, the heatsink and the ihs nearly fusioned!! I had to use brute force to remove my noctua d14 from the ihs. It was so fusioned, just to give you an idea, I could have removed all mounting, and the heatsink wouldn't have felt. And keep in mind the d14 is freaking heavy. I don't think I'll ever be using liquid metal pastes other than this delid case. Also it stained both of my ihs and d14 very bad, I had to lap them again to remove all the crap.

Consider twice before using liquid metal pastes other than on the die...

I thought Coollaboratory said Not to use CLLU or CLLP on copper... That it could have negative effects and cause issues, which you probably are seeing after using on bare copper.

Also, everywhere says that lapping is required to remove CLLP or CLLU for the most part, that CLLU is just easier to remove.
TH10A
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 5960x Rampage V Extreme 2x EVGA 980Ti Classified 32gb GSkill Ripjaws 4 2400mhz 
Hard DriveHard DriveHard DriveHard Drive
2x Samsung 840 EVO Seagate 3 TB 7200 rpm Seagate 2tb 7200rpm Intel 430 256gb 
CoolingCoolingOSKeyboard
Custom Loop - EK Fittings Too many Radiators Win 10 Das Keyboard Pro S 
PowerCaseMouseMouse Pad
2x EVGA 1300w G2 CaseLabs TH10A Corsair G65 RGB Corsair Large scale pads 
  hide details  
Reply
TH10A
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 5960x Rampage V Extreme 2x EVGA 980Ti Classified 32gb GSkill Ripjaws 4 2400mhz 
Hard DriveHard DriveHard DriveHard Drive
2x Samsung 840 EVO Seagate 3 TB 7200 rpm Seagate 2tb 7200rpm Intel 430 256gb 
CoolingCoolingOSKeyboard
Custom Loop - EK Fittings Too many Radiators Win 10 Das Keyboard Pro S 
PowerCaseMouseMouse Pad
2x EVGA 1300w G2 CaseLabs TH10A Corsair G65 RGB Corsair Large scale pads 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide