Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 297

post #2961 of 33547
Quote:
Originally Posted by Valgaur View Post

Lap the ihs because if its concave it will push your tim right off the cores.

Is that what you recommend for me too?
post #2962 of 33547
Quote:
Originally Posted by dalastbmills View Post

Was this ever answered? I did a quick jump through the pages between this post and the last page and didn't see it. I am very curious. Stock IHS seating, 2 of my buddies and myself both have much higher temps on the "middle" cores (1 and 2) as opposed to the "outside" (0 and 3). After delidding, my core 2 still reaches high 80's during IBT, while the others hit high 60's/low 70's. I'm very tempted to open my IHS and see if I maybe have too much Liquid Ultra over one section, but I'd rather not go open my case and such if it's unnecessary.

Igpu makes it hotter and causes up to a 00.5v Vcore needed to power it.
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
post #2963 of 33547
Funny you should mention that; I've been working a couple days at my mother's work, where we make gaskets and such, and I found a "lapping manual" laying around and it definitely made me smile.
Phyllis
(18 items)
 
  
CPUMotherboardGraphicsRAM
AMD Ryzen 1800x 4.00GHz @ 1.4v ASRock AB350 Pro4 EVGA 980ti Classified G.Skill 16GB DDR4 3200MHz (Only stable at 2400M... 
Hard DriveHard DriveOptical DriveCooling
Mushkin Chronos 120GB SSD { OS + Benchmarks } Seagate 1.5TB HDD { Music + Movies } Asus OEM CD/DVD R/W XSPC RX240 + XSPC RX 360 + Raystorm CPU block +... 
OSMonitorMonitorKeyboard
Windows 10 64bit Asus PG278Q ASUS VG248QE Logitech G710s 
PowerCaseMouseAudio
Corsair HX1050W Corsair Obsidian Series 900D Logitech G502 Proteus Core  Creative Sound Blaster Recon3D Fatal1ty Profess... 
Audio
RAZER BlackShark Circumaural Expert 2.0 Gaming ... 
  hide details  
Reply
Phyllis
(18 items)
 
  
CPUMotherboardGraphicsRAM
AMD Ryzen 1800x 4.00GHz @ 1.4v ASRock AB350 Pro4 EVGA 980ti Classified G.Skill 16GB DDR4 3200MHz (Only stable at 2400M... 
Hard DriveHard DriveOptical DriveCooling
Mushkin Chronos 120GB SSD { OS + Benchmarks } Seagate 1.5TB HDD { Music + Movies } Asus OEM CD/DVD R/W XSPC RX240 + XSPC RX 360 + Raystorm CPU block +... 
OSMonitorMonitorKeyboard
Windows 10 64bit Asus PG278Q ASUS VG248QE Logitech G710s 
PowerCaseMouseAudio
Corsair HX1050W Corsair Obsidian Series 900D Logitech G502 Proteus Core  Creative Sound Blaster Recon3D Fatal1ty Profess... 
Audio
RAZER BlackShark Circumaural Expert 2.0 Gaming ... 
  hide details  
Reply
post #2964 of 33547
Quote:
Originally Posted by Hokies83 View Post

Igpu makes it hotter and causes up to a 00.5v Vcore needed to power it.

Even if we aren't using the iGPU, it still causes higher temps? This was was also happening on my P67 board, which does not support the iGPU or even mention it in the BIOS.
Phyllis
(18 items)
 
  
CPUMotherboardGraphicsRAM
AMD Ryzen 1800x 4.00GHz @ 1.4v ASRock AB350 Pro4 EVGA 980ti Classified G.Skill 16GB DDR4 3200MHz (Only stable at 2400M... 
Hard DriveHard DriveOptical DriveCooling
Mushkin Chronos 120GB SSD { OS + Benchmarks } Seagate 1.5TB HDD { Music + Movies } Asus OEM CD/DVD R/W XSPC RX240 + XSPC RX 360 + Raystorm CPU block +... 
OSMonitorMonitorKeyboard
Windows 10 64bit Asus PG278Q ASUS VG248QE Logitech G710s 
PowerCaseMouseAudio
Corsair HX1050W Corsair Obsidian Series 900D Logitech G502 Proteus Core  Creative Sound Blaster Recon3D Fatal1ty Profess... 
Audio
RAZER BlackShark Circumaural Expert 2.0 Gaming ... 
  hide details  
Reply
Phyllis
(18 items)
 
  
CPUMotherboardGraphicsRAM
AMD Ryzen 1800x 4.00GHz @ 1.4v ASRock AB350 Pro4 EVGA 980ti Classified G.Skill 16GB DDR4 3200MHz (Only stable at 2400M... 
Hard DriveHard DriveOptical DriveCooling
Mushkin Chronos 120GB SSD { OS + Benchmarks } Seagate 1.5TB HDD { Music + Movies } Asus OEM CD/DVD R/W XSPC RX240 + XSPC RX 360 + Raystorm CPU block +... 
OSMonitorMonitorKeyboard
Windows 10 64bit Asus PG278Q ASUS VG248QE Logitech G710s 
PowerCaseMouseAudio
Corsair HX1050W Corsair Obsidian Series 900D Logitech G502 Proteus Core  Creative Sound Blaster Recon3D Fatal1ty Profess... 
Audio
RAZER BlackShark Circumaural Expert 2.0 Gaming ... 
  hide details  
Reply
post #2965 of 33547
Quote:
Originally Posted by dalastbmills View Post

Even if we aren't using the iGPU, it still causes higher temps? This was was also happening on my P67 board, which does not support the iGPU or even mention it in the BIOS.

If it is not on in the bios and you did not install the drivers for it..

Then it should not be making much a difference at all.
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
post #2966 of 33547
So then it looks like I have to either lap my IHS or remove it from the equation. Does anyone know if it's possible to place the Corsiar AIO block directly on the die? Or do the screws not go low enough?

Also, what type of liquid is in the lines and can they freeze? I'm thinking of building some sort of intake from the window above my PC, similar to a dryer vent, to bring in cold air from outside. I don't want to freeze the line or cause it to break/leak. Any ideas?
Phyllis
(18 items)
 
  
CPUMotherboardGraphicsRAM
AMD Ryzen 1800x 4.00GHz @ 1.4v ASRock AB350 Pro4 EVGA 980ti Classified G.Skill 16GB DDR4 3200MHz (Only stable at 2400M... 
Hard DriveHard DriveOptical DriveCooling
Mushkin Chronos 120GB SSD { OS + Benchmarks } Seagate 1.5TB HDD { Music + Movies } Asus OEM CD/DVD R/W XSPC RX240 + XSPC RX 360 + Raystorm CPU block +... 
OSMonitorMonitorKeyboard
Windows 10 64bit Asus PG278Q ASUS VG248QE Logitech G710s 
PowerCaseMouseAudio
Corsair HX1050W Corsair Obsidian Series 900D Logitech G502 Proteus Core  Creative Sound Blaster Recon3D Fatal1ty Profess... 
Audio
RAZER BlackShark Circumaural Expert 2.0 Gaming ... 
  hide details  
Reply
Phyllis
(18 items)
 
  
CPUMotherboardGraphicsRAM
AMD Ryzen 1800x 4.00GHz @ 1.4v ASRock AB350 Pro4 EVGA 980ti Classified G.Skill 16GB DDR4 3200MHz (Only stable at 2400M... 
Hard DriveHard DriveOptical DriveCooling
Mushkin Chronos 120GB SSD { OS + Benchmarks } Seagate 1.5TB HDD { Music + Movies } Asus OEM CD/DVD R/W XSPC RX240 + XSPC RX 360 + Raystorm CPU block +... 
OSMonitorMonitorKeyboard
Windows 10 64bit Asus PG278Q ASUS VG248QE Logitech G710s 
PowerCaseMouseAudio
Corsair HX1050W Corsair Obsidian Series 900D Logitech G502 Proteus Core  Creative Sound Blaster Recon3D Fatal1ty Profess... 
Audio
RAZER BlackShark Circumaural Expert 2.0 Gaming ... 
  hide details  
Reply
post #2967 of 33547
Quote:
Originally Posted by dalastbmills View Post

So then it looks like I have to either lap my IHS or remove it from the equation. Does anyone know if it's possible to place the Corsiar AIO block directly on the die? Or do the screws not go low enough?
Also, what type of liquid is in the lines and can they freeze? I'm thinking of building some sort of intake from the window above my PC, similar to a dryer vent, to bring in cold air from outside. I don't want to freeze the line or cause it to break/leak. Any ideas?

bad idea, one word: condensation.
Gaming Machine
(19 items)
 
CPUMotherboardGraphicsGraphics
Intel i7 3770k Asus z77 P8Z77-LK V Sapphire 290x Sapphire 290x 
RAMHard DriveHard DriveHard Drive
Gskill 4x4gb @ 1600mhz Samsung Evo 120gb Samsung Evo 120gb 2TB Seagate Game storage drive  
CoolingCoolingCoolingOS
XSPC Raystorm CPU BLOCK EK Nickle/Acetal 290x Block  2x XSPC 240MM Radiator Windows 8.1  
MonitorKeyboardPowerCase
Qnix Evolution II  Cooler Master Quickfire Rapid  Cooler Master V1000 Fractal Arc Midi R2 
MouseMouse PadAudio
Logitech G400 steel series qck Logitech G430 
  hide details  
Reply
Gaming Machine
(19 items)
 
CPUMotherboardGraphicsGraphics
Intel i7 3770k Asus z77 P8Z77-LK V Sapphire 290x Sapphire 290x 
RAMHard DriveHard DriveHard Drive
Gskill 4x4gb @ 1600mhz Samsung Evo 120gb Samsung Evo 120gb 2TB Seagate Game storage drive  
CoolingCoolingCoolingOS
XSPC Raystorm CPU BLOCK EK Nickle/Acetal 290x Block  2x XSPC 240MM Radiator Windows 8.1  
MonitorKeyboardPowerCase
Qnix Evolution II  Cooler Master Quickfire Rapid  Cooler Master V1000 Fractal Arc Midi R2 
MouseMouse PadAudio
Logitech G400 steel series qck Logitech G430 
  hide details  
Reply
post #2968 of 33547
Quote:
Originally Posted by dalastbmills View Post

So then it looks like I have to either lap my IHS or remove it from the equation. Does anyone know if it's possible to place the Corsiar AIO block directly on the die? Or do the screws not go low enough?
Also, what type of liquid is in the lines and can they freeze? I'm thinking of building some sort of intake from the window above my PC, similar to a dryer vent, to bring in cold air from outside. I don't want to freeze the line or cause it to break/leak. Any ideas?

Not sure on the direct die method using your cooler, but the coolant is propylene glycol, and it freezes below 0c actually, something like -28c or close to that.
post #2969 of 33547
Dam, I can't decide if I should buy liquid ultra again. I used the entire tube but failed on both my cpu and gpu, and have idle temps of 70c at 3500mhz! I can't even use my computer, that's how hot it gets, its almost like there is 0 contact.
Sold
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-4930k @4.7 Asus Rampage IV Black Edition EVGA GTX 780 Ti @1300/8250 1.21v G.Skill Trident X 4x4GB 2400MHz 9-11-11-31-1 
Hard DriveHard DriveCoolingCooling
Samsung 840 Pro 256GB  Western Digital Red 2TB EK Supremacy CPU Waterblock Acetal+Nickel  EK 780 Ti Waterblock Acetal+Nickel 
CoolingCoolingCoolingCooling
Primochill Advanced LRT White Tubing (2) Hardware Labs Black Ice SR-1 480 Radiator Bitspower Fittings (8) Corsair SP120 Quiet Edition Fans 
CoolingCoolingOSMonitor
EK Laing D5 Pump w/ Acetal Top  EK 250mm Reservoir  Windows 7 x64 ROG SWIFT 
KeyboardPowerCaseMouse
Das Ultimate S Blank Cherry MX Blue  EVGA G2 1300 Case Labs Magnum TH10 Razer Deathadder 2013 
Mouse PadAudio
Razer Goliathus Control Sennheiser HD650  
  hide details  
Reply
Sold
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-4930k @4.7 Asus Rampage IV Black Edition EVGA GTX 780 Ti @1300/8250 1.21v G.Skill Trident X 4x4GB 2400MHz 9-11-11-31-1 
Hard DriveHard DriveCoolingCooling
Samsung 840 Pro 256GB  Western Digital Red 2TB EK Supremacy CPU Waterblock Acetal+Nickel  EK 780 Ti Waterblock Acetal+Nickel 
CoolingCoolingCoolingCooling
Primochill Advanced LRT White Tubing (2) Hardware Labs Black Ice SR-1 480 Radiator Bitspower Fittings (8) Corsair SP120 Quiet Edition Fans 
CoolingCoolingOSMonitor
EK Laing D5 Pump w/ Acetal Top  EK 250mm Reservoir  Windows 7 x64 ROG SWIFT 
KeyboardPowerCaseMouse
Das Ultimate S Blank Cherry MX Blue  EVGA G2 1300 Case Labs Magnum TH10 Razer Deathadder 2013 
Mouse PadAudio
Razer Goliathus Control Sennheiser HD650  
  hide details  
Reply
post #2970 of 33547
Quote:
Originally Posted by Arm3nian View Post

Dam, I can't decide if I should buy liquid ultra again. I used the entire tube but failed on both my cpu and gpu, and have idle temps of 70c at 3500mhz! I can't even use my computer, that's how hot it gets, its almost like there is 0 contact.

Did you delid or what? Buy Liquid Pro...I did. Last time I got Liquid Ultra, which worked GREAT for my gpu btw...I don't feel like replacing it though, but I'll use it for my die and ihs probably. I guess I'll have to lap the ihs aswell...won't touch the Silver Arrow's base though.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide