Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 2973

post #29721 of 33647
Would a badly seated CPU cause motherboard weirdness??
z97 RIG
(15 items)
 
Apophis
(18 items)
 
 
CPUMotherboardGraphicsRAM
4790k MSI z97 Gaming 7 Gigabyte G1 Gaming GTX 970 G Skill Ares 16gb 
Hard DriveHard DriveCoolingOS
Crucial MX100 256gb Seagate Barracuda 2tb Corsair H70 Windows 7 Pro 64bit 
MonitorKeyboardPowerCase
AOC 24 inch 144hz  Razer Blackwidow chroma EVGA 850 G Silient Corsair Air 540 
MouseMouse PadAudio
Razer Deathadder Chroma Generic On-board Audio 
CPUMotherboardGraphicsGraphics
Core i7 920 D0@ 4.2 1.25625 vcore EVGA Classified 760 EVGA GTX 470 SC+ EVGA GTX 470 SC+ 
RAMHard DriveOptical DriveCooling
Corsair Dominator GT 1866 3x2 gbs 1TB Samsung Spinpoint Lite-On DVD drive EK Supreme LTX Water Block 
CoolingCoolingCoolingOS
EK EVGA Classified Full Motherboard Block EK GTX 470 Acetal/Copper Water Block EK GTX 470 Acetal/Copper Water Block Winows 7 PRO 64 bit 
MonitorKeyboardPowerCase
Samsung ToC 24" Razer Black Widow Seasonic Platinum 1000 watt CoolerMaster HAF 932 
Mouse
Logitech G5 
  hide details  
Reply
z97 RIG
(15 items)
 
Apophis
(18 items)
 
 
CPUMotherboardGraphicsRAM
4790k MSI z97 Gaming 7 Gigabyte G1 Gaming GTX 970 G Skill Ares 16gb 
Hard DriveHard DriveCoolingOS
Crucial MX100 256gb Seagate Barracuda 2tb Corsair H70 Windows 7 Pro 64bit 
MonitorKeyboardPowerCase
AOC 24 inch 144hz  Razer Blackwidow chroma EVGA 850 G Silient Corsair Air 540 
MouseMouse PadAudio
Razer Deathadder Chroma Generic On-board Audio 
CPUMotherboardGraphicsGraphics
Core i7 920 D0@ 4.2 1.25625 vcore EVGA Classified 760 EVGA GTX 470 SC+ EVGA GTX 470 SC+ 
RAMHard DriveOptical DriveCooling
Corsair Dominator GT 1866 3x2 gbs 1TB Samsung Spinpoint Lite-On DVD drive EK Supreme LTX Water Block 
CoolingCoolingCoolingOS
EK EVGA Classified Full Motherboard Block EK GTX 470 Acetal/Copper Water Block EK GTX 470 Acetal/Copper Water Block Winows 7 PRO 64 bit 
MonitorKeyboardPowerCase
Samsung ToC 24" Razer Black Widow Seasonic Platinum 1000 watt CoolerMaster HAF 932 
Mouse
Logitech G5 
  hide details  
Reply
post #29722 of 33647
yeah, if the pins are bent or the chip is misaligned.
    
CPUMotherboardGraphicsRAM
Intel Core i7 7820X 3.6GHz 8-Core Asus STRIX X299-E GAMING ATX LGA2066 EVGA GeForce GTX 1080 Ti 11GB FTW3 HYBRID GAMING Corsair Vengeance RGB 32GB DDR4-3200 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 960 EVO 250GB M.2-NVMe SSD - Windows/Boot OCZ TRION 150 480GB 2.5" SSD - Games(RAID0) OCZ TRION 150 480GB 2.5" SSD - Games(RAID0) Pioneer BDR-209DBK Blu-Ray/DVD/CD Re/Writer 
CoolingOSMonitorKeyboard
Thermaltake Water 3.0 Riing RGB 360 AIO LCS Windows 7 SP1 Ultimate 64-bit Samsung 40in. HDTV Razer Ornato Chroma 
PowerCaseMouseMouse Pad
Thermaltake Toughpower DPS G RGB Titanium 1000W... Thermaltake Core X31 RGB ATX Mid Tower Razer Deathadder Chroma Razer Firefly Chroma 
Audio
Samsung K360 Soundbar+Subwoofer 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Core i7 7820X 3.6GHz 8-Core Asus STRIX X299-E GAMING ATX LGA2066 EVGA GeForce GTX 1080 Ti 11GB FTW3 HYBRID GAMING Corsair Vengeance RGB 32GB DDR4-3200 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 960 EVO 250GB M.2-NVMe SSD - Windows/Boot OCZ TRION 150 480GB 2.5" SSD - Games(RAID0) OCZ TRION 150 480GB 2.5" SSD - Games(RAID0) Pioneer BDR-209DBK Blu-Ray/DVD/CD Re/Writer 
CoolingOSMonitorKeyboard
Thermaltake Water 3.0 Riing RGB 360 AIO LCS Windows 7 SP1 Ultimate 64-bit Samsung 40in. HDTV Razer Ornato Chroma 
PowerCaseMouseMouse Pad
Thermaltake Toughpower DPS G RGB Titanium 1000W... Thermaltake Core X31 RGB ATX Mid Tower Razer Deathadder Chroma Razer Firefly Chroma 
Audio
Samsung K360 Soundbar+Subwoofer 
  hide details  
Reply
post #29723 of 33647
Quote:
Originally Posted by cephelix View Post

Quote:
Originally Posted by Cakewalk_S View Post

Hows CLU holding up on bare dye's? I'm picking some up for my b-day in the next few weeks. Going to be doing my laptop CPU and GPU with some CLU. Definitely going to paint the surfaces around the copper heatsink with nail polish and also the caps on the chips. I'm hoping this will reduce my laptop temps at least 5C, who knows, maybe even 8-10C...
I applied CLU on my laptop's die before and while it worked for some people, it didn't for me. Got a 7-10C increase in idle temps. Removed it and replaced with GC extreme and temps were back to norml

How's that even possible? Every single test I've seen has CLU or CLP vastly beating out any other thermal paste. I'm still thinking CLU will easily beat out PK-2...
post #29724 of 33647
Are mobo coolers copper?

Lm will outperform any other tim, unless there isn't good enough contact between chip and cooler.
Dorje
(12 items)
 
  
CPUMotherboardGraphicsRAM
4690k Gigabyte z97x-sli MSI TF 280 G Skill Sniper 1600/9 
Hard DriveCoolingOSMonitor
Seagate 4 tb hybrid Corsair h80i Windows 8.1 SE39UY04 
PowerCaseMouseAudio
EVGA NEX-G 750W S340 (white) Bloody ZL5A Razer Blackshark 
  hide details  
Reply
Dorje
(12 items)
 
  
CPUMotherboardGraphicsRAM
4690k Gigabyte z97x-sli MSI TF 280 G Skill Sniper 1600/9 
Hard DriveCoolingOSMonitor
Seagate 4 tb hybrid Corsair h80i Windows 8.1 SE39UY04 
PowerCaseMouseAudio
EVGA NEX-G 750W S340 (white) Bloody ZL5A Razer Blackshark 
  hide details  
Reply
post #29725 of 33647
Aye, most of them are
    
CPUMotherboardGraphicsRAM
Intel Core i7 7820X 3.6GHz 8-Core Asus STRIX X299-E GAMING ATX LGA2066 EVGA GeForce GTX 1080 Ti 11GB FTW3 HYBRID GAMING Corsair Vengeance RGB 32GB DDR4-3200 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 960 EVO 250GB M.2-NVMe SSD - Windows/Boot OCZ TRION 150 480GB 2.5" SSD - Games(RAID0) OCZ TRION 150 480GB 2.5" SSD - Games(RAID0) Pioneer BDR-209DBK Blu-Ray/DVD/CD Re/Writer 
CoolingOSMonitorKeyboard
Thermaltake Water 3.0 Riing RGB 360 AIO LCS Windows 7 SP1 Ultimate 64-bit Samsung 40in. HDTV Razer Ornato Chroma 
PowerCaseMouseMouse Pad
Thermaltake Toughpower DPS G RGB Titanium 1000W... Thermaltake Core X31 RGB ATX Mid Tower Razer Deathadder Chroma Razer Firefly Chroma 
Audio
Samsung K360 Soundbar+Subwoofer 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Core i7 7820X 3.6GHz 8-Core Asus STRIX X299-E GAMING ATX LGA2066 EVGA GeForce GTX 1080 Ti 11GB FTW3 HYBRID GAMING Corsair Vengeance RGB 32GB DDR4-3200 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 960 EVO 250GB M.2-NVMe SSD - Windows/Boot OCZ TRION 150 480GB 2.5" SSD - Games(RAID0) OCZ TRION 150 480GB 2.5" SSD - Games(RAID0) Pioneer BDR-209DBK Blu-Ray/DVD/CD Re/Writer 
CoolingOSMonitorKeyboard
Thermaltake Water 3.0 Riing RGB 360 AIO LCS Windows 7 SP1 Ultimate 64-bit Samsung 40in. HDTV Razer Ornato Chroma 
PowerCaseMouseMouse Pad
Thermaltake Toughpower DPS G RGB Titanium 1000W... Thermaltake Core X31 RGB ATX Mid Tower Razer Deathadder Chroma Razer Firefly Chroma 
Audio
Samsung K360 Soundbar+Subwoofer 
  hide details  
Reply
post #29726 of 33647
Quote:
Originally Posted by Cakewalk_S View Post

How's that even possible? Every single test I've seen has CLU or CLP vastly beating out any other thermal paste. I'm still thinking CLU will easily beat out PK-2...

Quote:
Originally Posted by jdorje View Post

Are mobo coolers copper?

Lm will outperform any other tim, unless there isn't good enough contact between chip and cooler.
I think it's as jdorje stated. The lm is just too thin than that therer wasn't enough proper contact between cooler and die... Just to be clear I'm not saying lm is bad and initially i was perplexed at the operating temps as well. But i suppose it is what it is
Floored
(18 items)
 
  
CPUMotherboardGraphicsRAM
i7 4790K Gigabyte Z97X Gaming 7 MSI R9 290 Gaming 4G Kingston Low Voltage Value Ram 
Hard DriveHard DriveCoolingCooling
Crucial M500 480GB Western Digital Green 3TB Noctua NH-D15 Nidec Servo Gentle Typhoons 1850rpm x 8 
OSMonitorMonitorKeyboard
Windows 8.1 Pro 64-bit Philips 240B1CB 1920 x 1200 Samsung Syncmaster 2443BW 1920 x 1200 Filco Majestouch 2 Ninja TKL 
PowerCaseMouseMouse Pad
Seasonic X750 Corsair Obsidian 750D Zowie FK-1 Barracuda Juggernaut 
AudioOther
Corsair H2100 Wireless Headset NZXT Sentry 3  
  hide details  
Reply
Floored
(18 items)
 
  
CPUMotherboardGraphicsRAM
i7 4790K Gigabyte Z97X Gaming 7 MSI R9 290 Gaming 4G Kingston Low Voltage Value Ram 
Hard DriveHard DriveCoolingCooling
Crucial M500 480GB Western Digital Green 3TB Noctua NH-D15 Nidec Servo Gentle Typhoons 1850rpm x 8 
OSMonitorMonitorKeyboard
Windows 8.1 Pro 64-bit Philips 240B1CB 1920 x 1200 Samsung Syncmaster 2443BW 1920 x 1200 Filco Majestouch 2 Ninja TKL 
PowerCaseMouseMouse Pad
Seasonic X750 Corsair Obsidian 750D Zowie FK-1 Barracuda Juggernaut 
AudioOther
Corsair H2100 Wireless Headset NZXT Sentry 3  
  hide details  
Reply
post #29727 of 33647
I used Arctic Silver 5 between the die and IHS...mistake #1, but it was all I had at the time. Mistake #2 was using it between the H100i mount and the IHS. When I removed the H100i block, all the thermal paste was on it, and very little on the IHS. If you imagine where the die is under the IHS, it was not covered.
I cleaned of the old thermal paste with an old t-shirt and Q-tips with 91% rubbing alcohol.
Should I reset the bios back to stock to allow time for the paste to cure? Or can I leave at 4.7GHz and be ok?
I don't want to take my computer apart anymore, lol! Thanks in advance thumb.gif .
Edited by DeathAngel74 - 1/26/16 at 5:46pm
    
CPUMotherboardGraphicsRAM
Intel Core i7 7820X 3.6GHz 8-Core Asus STRIX X299-E GAMING ATX LGA2066 EVGA GeForce GTX 1080 Ti 11GB FTW3 HYBRID GAMING Corsair Vengeance RGB 32GB DDR4-3200 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 960 EVO 250GB M.2-NVMe SSD - Windows/Boot OCZ TRION 150 480GB 2.5" SSD - Games(RAID0) OCZ TRION 150 480GB 2.5" SSD - Games(RAID0) Pioneer BDR-209DBK Blu-Ray/DVD/CD Re/Writer 
CoolingOSMonitorKeyboard
Thermaltake Water 3.0 Riing RGB 360 AIO LCS Windows 7 SP1 Ultimate 64-bit Samsung 40in. HDTV Razer Ornato Chroma 
PowerCaseMouseMouse Pad
Thermaltake Toughpower DPS G RGB Titanium 1000W... Thermaltake Core X31 RGB ATX Mid Tower Razer Deathadder Chroma Razer Firefly Chroma 
Audio
Samsung K360 Soundbar+Subwoofer 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Core i7 7820X 3.6GHz 8-Core Asus STRIX X299-E GAMING ATX LGA2066 EVGA GeForce GTX 1080 Ti 11GB FTW3 HYBRID GAMING Corsair Vengeance RGB 32GB DDR4-3200 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 960 EVO 250GB M.2-NVMe SSD - Windows/Boot OCZ TRION 150 480GB 2.5" SSD - Games(RAID0) OCZ TRION 150 480GB 2.5" SSD - Games(RAID0) Pioneer BDR-209DBK Blu-Ray/DVD/CD Re/Writer 
CoolingOSMonitorKeyboard
Thermaltake Water 3.0 Riing RGB 360 AIO LCS Windows 7 SP1 Ultimate 64-bit Samsung 40in. HDTV Razer Ornato Chroma 
PowerCaseMouseMouse Pad
Thermaltake Toughpower DPS G RGB Titanium 1000W... Thermaltake Core X31 RGB ATX Mid Tower Razer Deathadder Chroma Razer Firefly Chroma 
Audio
Samsung K360 Soundbar+Subwoofer 
  hide details  
Reply
post #29728 of 33647
Quote:
Originally Posted by DeathAngel74 View Post

I used Arctic Silver 5 between the die and IHS...mistake #1, but it was all I had at the time. Mistake #2 was using it between the H100i mount and the IHS. When I removed the H100i block, all the thermal paste was on it, and very little on the IHS. If you imagine where the die is under the IHS, it was not covered.
I cleaned of the old thermal paste with an old t-shirt and Q-tips with 91% rubbing alcohol.
Should I reset the bios back to stock to allow time for the paste to cure? Or can I leave at 4.7GHz and be ok?
I don't want to take my computer apart anymore, lol! Thanks in advance thumb.gif .
If your temps are in check then i'd just leave it oc-ed. But at the next opportunity just swap out the thermal paste to something better. I shipped a 10g tub of gc extreme from HK since i can't find it locally and it's served me well so far. The only thing i don't like is the application since it's not in syringe form
Floored
(18 items)
 
  
CPUMotherboardGraphicsRAM
i7 4790K Gigabyte Z97X Gaming 7 MSI R9 290 Gaming 4G Kingston Low Voltage Value Ram 
Hard DriveHard DriveCoolingCooling
Crucial M500 480GB Western Digital Green 3TB Noctua NH-D15 Nidec Servo Gentle Typhoons 1850rpm x 8 
OSMonitorMonitorKeyboard
Windows 8.1 Pro 64-bit Philips 240B1CB 1920 x 1200 Samsung Syncmaster 2443BW 1920 x 1200 Filco Majestouch 2 Ninja TKL 
PowerCaseMouseMouse Pad
Seasonic X750 Corsair Obsidian 750D Zowie FK-1 Barracuda Juggernaut 
AudioOther
Corsair H2100 Wireless Headset NZXT Sentry 3  
  hide details  
Reply
Floored
(18 items)
 
  
CPUMotherboardGraphicsRAM
i7 4790K Gigabyte Z97X Gaming 7 MSI R9 290 Gaming 4G Kingston Low Voltage Value Ram 
Hard DriveHard DriveCoolingCooling
Crucial M500 480GB Western Digital Green 3TB Noctua NH-D15 Nidec Servo Gentle Typhoons 1850rpm x 8 
OSMonitorMonitorKeyboard
Windows 8.1 Pro 64-bit Philips 240B1CB 1920 x 1200 Samsung Syncmaster 2443BW 1920 x 1200 Filco Majestouch 2 Ninja TKL 
PowerCaseMouseMouse Pad
Seasonic X750 Corsair Obsidian 750D Zowie FK-1 Barracuda Juggernaut 
AudioOther
Corsair H2100 Wireless Headset NZXT Sentry 3  
  hide details  
Reply
post #29729 of 33647
Quote:
Originally Posted by v1ral View Post

Would a badly seated CPU cause motherboard weirdness??

And in my experience even from too little or too much pressure (or uneven), especially on a naked die.
mhmm
(25 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5-6600k @ 4.6, 1.375v (6700k on standby) ASRock Fatal1ty Z170 Gaming K4/D3 (DDR3) XFX RX Vega 56 2x8GB Crucial Ballistix DDR3L @2100 10-10-10 1T... 
Hard DriveHard DriveHard DriveCooling
OCZ Vector 180 240GB Raid 0 OCZ Vector 150 240GB Raid 0 Seagate Momentus XT 750GB (gen 2) Enzotech Sapphire SCW-Rev.A CPU block 
CoolingCoolingCoolingCooling
Nexxxos GPX GPU block Black Ice Nemesis 240GTS (Front 240x30mm) Alphacool NexXxos ST30 (Top 240x30mm) XSPC RX120 (Rear 120x60mm) 
CoolingCoolingCoolingCooling
Alphacool VPP655 / Laing D5 XSPC Dual Bay Res NZXT Sentry Mesh Fan controller Primochill Advanced LRT 3/8" Blue UV tubing 
OSMonitorKeyboardPower
Windows 10 Pro LG 34UM67 21:9 Freesync 2560x1080 32-75hz Razer Orbweaver / Lenovo Y mechanical Seasonic Focus Plus 850w 
CaseMouseMouse PadAudio
Antec Eleven Hundred v2 Razer Naga Chroma Glorious PC Gaming Race Quality onboard 
Audio
Old TEAC receiver 
  hide details  
Reply
mhmm
(25 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5-6600k @ 4.6, 1.375v (6700k on standby) ASRock Fatal1ty Z170 Gaming K4/D3 (DDR3) XFX RX Vega 56 2x8GB Crucial Ballistix DDR3L @2100 10-10-10 1T... 
Hard DriveHard DriveHard DriveCooling
OCZ Vector 180 240GB Raid 0 OCZ Vector 150 240GB Raid 0 Seagate Momentus XT 750GB (gen 2) Enzotech Sapphire SCW-Rev.A CPU block 
CoolingCoolingCoolingCooling
Nexxxos GPX GPU block Black Ice Nemesis 240GTS (Front 240x30mm) Alphacool NexXxos ST30 (Top 240x30mm) XSPC RX120 (Rear 120x60mm) 
CoolingCoolingCoolingCooling
Alphacool VPP655 / Laing D5 XSPC Dual Bay Res NZXT Sentry Mesh Fan controller Primochill Advanced LRT 3/8" Blue UV tubing 
OSMonitorKeyboardPower
Windows 10 Pro LG 34UM67 21:9 Freesync 2560x1080 32-75hz Razer Orbweaver / Lenovo Y mechanical Seasonic Focus Plus 850w 
CaseMouseMouse PadAudio
Antec Eleven Hundred v2 Razer Naga Chroma Glorious PC Gaming Race Quality onboard 
Audio
Old TEAC receiver 
  hide details  
Reply
post #29730 of 33647
Quote:
Originally Posted by cephelix View Post

If your temps are in check then i'd just leave it oc-ed. But at the next opportunity just swap out the thermal paste to something better. I shipped a 10g tub of gc extreme from HK since i can't find it locally and it's served me well so far. The only thing i don't like is the application since it's not in syringe form

Yeah I remember you told me last week the temps would go up and they already did so I'll be trying out that new Thermal Grizzly in a few days. I just wonder why? I use ceramique on the die of my GPU how different is that really from a cpu die and water block?
mhmm
(25 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5-6600k @ 4.6, 1.375v (6700k on standby) ASRock Fatal1ty Z170 Gaming K4/D3 (DDR3) XFX RX Vega 56 2x8GB Crucial Ballistix DDR3L @2100 10-10-10 1T... 
Hard DriveHard DriveHard DriveCooling
OCZ Vector 180 240GB Raid 0 OCZ Vector 150 240GB Raid 0 Seagate Momentus XT 750GB (gen 2) Enzotech Sapphire SCW-Rev.A CPU block 
CoolingCoolingCoolingCooling
Nexxxos GPX GPU block Black Ice Nemesis 240GTS (Front 240x30mm) Alphacool NexXxos ST30 (Top 240x30mm) XSPC RX120 (Rear 120x60mm) 
CoolingCoolingCoolingCooling
Alphacool VPP655 / Laing D5 XSPC Dual Bay Res NZXT Sentry Mesh Fan controller Primochill Advanced LRT 3/8" Blue UV tubing 
OSMonitorKeyboardPower
Windows 10 Pro LG 34UM67 21:9 Freesync 2560x1080 32-75hz Razer Orbweaver / Lenovo Y mechanical Seasonic Focus Plus 850w 
CaseMouseMouse PadAudio
Antec Eleven Hundred v2 Razer Naga Chroma Glorious PC Gaming Race Quality onboard 
Audio
Old TEAC receiver 
  hide details  
Reply
mhmm
(25 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5-6600k @ 4.6, 1.375v (6700k on standby) ASRock Fatal1ty Z170 Gaming K4/D3 (DDR3) XFX RX Vega 56 2x8GB Crucial Ballistix DDR3L @2100 10-10-10 1T... 
Hard DriveHard DriveHard DriveCooling
OCZ Vector 180 240GB Raid 0 OCZ Vector 150 240GB Raid 0 Seagate Momentus XT 750GB (gen 2) Enzotech Sapphire SCW-Rev.A CPU block 
CoolingCoolingCoolingCooling
Nexxxos GPX GPU block Black Ice Nemesis 240GTS (Front 240x30mm) Alphacool NexXxos ST30 (Top 240x30mm) XSPC RX120 (Rear 120x60mm) 
CoolingCoolingCoolingCooling
Alphacool VPP655 / Laing D5 XSPC Dual Bay Res NZXT Sentry Mesh Fan controller Primochill Advanced LRT 3/8" Blue UV tubing 
OSMonitorKeyboardPower
Windows 10 Pro LG 34UM67 21:9 Freesync 2560x1080 32-75hz Razer Orbweaver / Lenovo Y mechanical Seasonic Focus Plus 850w 
CaseMouseMouse PadAudio
Antec Eleven Hundred v2 Razer Naga Chroma Glorious PC Gaming Race Quality onboard 
Audio
Old TEAC receiver 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide