Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 3060

post #30591 of 34072
Quote:
Originally Posted by paskowitz View Post

Quick question. Is CLU "safe" on nickle plated copper? By safe I mean it won't bond (like normal straight copper... like on my Apogee XL...).

Should be fine, i have it on straight copper and it doesnt bond. All copper does is, because its porous the copper absorbs some of the CLU and fills in all the tiny pores and gaps (which is fine with me haha)

Ive cleaned it off after a couple weeks and it wiped right off so now easy. Giving it a stress test then shutting off the pc and wiping it right up when hot works great.

On nickel its even better should wipe right off, might stain the nickel a bit depending on the quality but no biggie.
    
CPUMotherboardGraphicsRAM
R7 1700X asus crosshair 6 Sapphire R9 390 Nitro CMK16GX4M2B3200C16 
Hard DriveHard DriveCoolingCooling
Kingston HyperX 3K Seagate ST2000DM006 EKWB Supremacy Evo EK-XRES 100 Revo D5 - Acetal 
CoolingCoolingCoolingCooling
Alphacool GPX r9 390 m01 alphacool xt45 240 Alphacool xt45 360 Alphacool D5 PWM 
OSMonitorKeyboardPower
Windows 10 LG 29UM68 Corsair Strafe Corsair RM1000 
CaseMouseMouse Pad
Thermaltake X5 Corsair M65 Pro RGB Razer Goliathus Speed 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
R7 1700X asus crosshair 6 Sapphire R9 390 Nitro CMK16GX4M2B3200C16 
Hard DriveHard DriveCoolingCooling
Kingston HyperX 3K Seagate ST2000DM006 EKWB Supremacy Evo EK-XRES 100 Revo D5 - Acetal 
CoolingCoolingCoolingCooling
Alphacool GPX r9 390 m01 alphacool xt45 240 Alphacool xt45 360 Alphacool D5 PWM 
OSMonitorKeyboardPower
Windows 10 LG 29UM68 Corsair Strafe Corsair RM1000 
CaseMouseMouse Pad
Thermaltake X5 Corsair M65 Pro RGB Razer Goliathus Speed 
  hide details  
Reply
post #30592 of 34072
Quote:
Originally Posted by paskowitz View Post

Quick question. Is CLU "safe" on nickle plated copper? By safe I mean it won't bond (like normal straight copper... like on my Apogee XL...).
I'm 90% sure that CLU/P doesn't stick to nickle plating at all like it does copper. BUT I haven't used it on any nickle plating other than my IHS and it is decently stained from Phobya LM. Hopefully someone with more confidence in their answer will chime in tongue.gif
main rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 4790k EVGA z97 Classified SLI gtx 980 klevv neo 
Hard DriveHard DriveCoolingOS
Intel 535 SSD seagate barracuda Custom Loop windows 10 
MonitorMonitorKeyboardPower
Dell S2716DG Asus PB277Q Logitech G710 Corsair RM1000x 
CaseMouseMouse PadAudio
Tt V41 EVGA Torq x10  Steel series QCK Logitech G930 
  hide details  
Reply
main rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 4790k EVGA z97 Classified SLI gtx 980 klevv neo 
Hard DriveHard DriveCoolingOS
Intel 535 SSD seagate barracuda Custom Loop windows 10 
MonitorMonitorKeyboardPower
Dell S2716DG Asus PB277Q Logitech G710 Corsair RM1000x 
CaseMouseMouse PadAudio
Tt V41 EVGA Torq x10  Steel series QCK Logitech G930 
  hide details  
Reply
post #30593 of 34072
Quote:
Originally Posted by 0ldChicken View Post

I'm 90% sure that CLU/P doesn't stick to nickle plating at all like it does copper. BUT I haven't used it on any nickle plating other than my IHS and it is decently stained from Phobya LM. Hopefully someone with more confidence in their answer will chime in tongue.gif

It stained my IHS as well pretty sure thats nickel plated copper as well. Its not an issue though unless you have the bottom of your heatsink on show (not possible btw haha).

Theres not much temp difference between TIM and LM BUT the big issue is that TIMs for wtv reason on a bare die tend to push/press out. I think thats why the intel tim is so awesome because it doesnt push out at all.
    
CPUMotherboardGraphicsRAM
R7 1700X asus crosshair 6 Sapphire R9 390 Nitro CMK16GX4M2B3200C16 
Hard DriveHard DriveCoolingCooling
Kingston HyperX 3K Seagate ST2000DM006 EKWB Supremacy Evo EK-XRES 100 Revo D5 - Acetal 
CoolingCoolingCoolingCooling
Alphacool GPX r9 390 m01 alphacool xt45 240 Alphacool xt45 360 Alphacool D5 PWM 
OSMonitorKeyboardPower
Windows 10 LG 29UM68 Corsair Strafe Corsair RM1000 
CaseMouseMouse Pad
Thermaltake X5 Corsair M65 Pro RGB Razer Goliathus Speed 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
R7 1700X asus crosshair 6 Sapphire R9 390 Nitro CMK16GX4M2B3200C16 
Hard DriveHard DriveCoolingCooling
Kingston HyperX 3K Seagate ST2000DM006 EKWB Supremacy Evo EK-XRES 100 Revo D5 - Acetal 
CoolingCoolingCoolingCooling
Alphacool GPX r9 390 m01 alphacool xt45 240 Alphacool xt45 360 Alphacool D5 PWM 
OSMonitorKeyboardPower
Windows 10 LG 29UM68 Corsair Strafe Corsair RM1000 
CaseMouseMouse Pad
Thermaltake X5 Corsair M65 Pro RGB Razer Goliathus Speed 
  hide details  
Reply
post #30594 of 34072
Quote:
Originally Posted by bluej511 View Post

Few months? Your cpu must be very low tdp lol. Mine starts getting higher in temps after a few days haha.
I have a 4770k that struggles to do 4.3ghz, so I just end up running it at 4ghz when the paste turns to soggy mud haha.
post #30595 of 34072

Say should I use CLU or stick with my NTH1 if I were go naked delidding? Since I'm using EK supremacy block + precisemount

Crunching
(21 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 3770K @ 4.6ghz delidded ASUS P8Z77-V Pro  Evga GTX980TI Classified Corsair Vengeance DDR3 1600 8GB Kit  
Hard DriveHard DriveHard DriveOptical Drive
Samsung Pro 256GB Solid State  WD Caviar Black 72000rpm 1.5TB WD Caviar Black 72000rpm 4TB LG 14X blu-ray writer 
CoolingCoolingCoolingCooling
EK 12mm acrylic loop EK-Supremacy EVO, EK-FC780 GTX Classy XE 480, XE 240 EK-XRES 140 Revo D5 PWM with Multiport TOP 
CoolingMonitorPowerCase
phobya thermal sensor G1/4 Asus Pg279q Corsair ax1200i overkill Caselab SM8 Merlin 
AudioAudioAudioAudio
Asus Xonar STX with Sparkos I/V, Muse02 Buffer Noble K10C + labkable samurai  Audeze El-8 OB Bose Companion 
  hide details  
Reply
Crunching
(21 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 3770K @ 4.6ghz delidded ASUS P8Z77-V Pro  Evga GTX980TI Classified Corsair Vengeance DDR3 1600 8GB Kit  
Hard DriveHard DriveHard DriveOptical Drive
Samsung Pro 256GB Solid State  WD Caviar Black 72000rpm 1.5TB WD Caviar Black 72000rpm 4TB LG 14X blu-ray writer 
CoolingCoolingCoolingCooling
EK 12mm acrylic loop EK-Supremacy EVO, EK-FC780 GTX Classy XE 480, XE 240 EK-XRES 140 Revo D5 PWM with Multiport TOP 
CoolingMonitorPowerCase
phobya thermal sensor G1/4 Asus Pg279q Corsair ax1200i overkill Caselab SM8 Merlin 
AudioAudioAudioAudio
Asus Xonar STX with Sparkos I/V, Muse02 Buffer Noble K10C + labkable samurai  Audeze El-8 OB Bose Companion 
  hide details  
Reply
post #30596 of 34072
Quote:
Originally Posted by Castaile View Post

Say should I use CLU or stick with my NTH1 if I were go naked delidding? Since I'm using EK supremacy block + precisemount

CLU all the way, not because the temps will be magically lower but because it doesnt pump/press/push out like TIMs do. I tried Noctua on mine and it didnt last a couple days before temps went up.

Because the pressure of the waterblock on the bare die is so low thats its better to use CLU. If you were to shave down the socket just a little bit might work even better but bare die is pretty good as is. I dropped at least 3-4°C going bare die.
    
CPUMotherboardGraphicsRAM
R7 1700X asus crosshair 6 Sapphire R9 390 Nitro CMK16GX4M2B3200C16 
Hard DriveHard DriveCoolingCooling
Kingston HyperX 3K Seagate ST2000DM006 EKWB Supremacy Evo EK-XRES 100 Revo D5 - Acetal 
CoolingCoolingCoolingCooling
Alphacool GPX r9 390 m01 alphacool xt45 240 Alphacool xt45 360 Alphacool D5 PWM 
OSMonitorKeyboardPower
Windows 10 LG 29UM68 Corsair Strafe Corsair RM1000 
CaseMouseMouse Pad
Thermaltake X5 Corsair M65 Pro RGB Razer Goliathus Speed 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
R7 1700X asus crosshair 6 Sapphire R9 390 Nitro CMK16GX4M2B3200C16 
Hard DriveHard DriveCoolingCooling
Kingston HyperX 3K Seagate ST2000DM006 EKWB Supremacy Evo EK-XRES 100 Revo D5 - Acetal 
CoolingCoolingCoolingCooling
Alphacool GPX r9 390 m01 alphacool xt45 240 Alphacool xt45 360 Alphacool D5 PWM 
OSMonitorKeyboardPower
Windows 10 LG 29UM68 Corsair Strafe Corsair RM1000 
CaseMouseMouse Pad
Thermaltake X5 Corsair M65 Pro RGB Razer Goliathus Speed 
  hide details  
Reply
post #30597 of 34072
Quote:
Originally Posted by bluej511 View Post


CLU all the way, not because the temps will be magically lower but because it doesnt pump/press/push out like TIMs do. I tried Noctua on mine and it didnt last a couple days before temps went up.

Because the pressure of the waterblock on the bare die is so low thats its better to use CLU. If you were to shave down the socket just a little bit might work even better but bare die is pretty good as is. I dropped at least 3-4°C going bare die.

Thanks bluej

How was your experience applying CLU onto the waterblock?

Crunching
(21 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 3770K @ 4.6ghz delidded ASUS P8Z77-V Pro  Evga GTX980TI Classified Corsair Vengeance DDR3 1600 8GB Kit  
Hard DriveHard DriveHard DriveOptical Drive
Samsung Pro 256GB Solid State  WD Caviar Black 72000rpm 1.5TB WD Caviar Black 72000rpm 4TB LG 14X blu-ray writer 
CoolingCoolingCoolingCooling
EK 12mm acrylic loop EK-Supremacy EVO, EK-FC780 GTX Classy XE 480, XE 240 EK-XRES 140 Revo D5 PWM with Multiport TOP 
CoolingMonitorPowerCase
phobya thermal sensor G1/4 Asus Pg279q Corsair ax1200i overkill Caselab SM8 Merlin 
AudioAudioAudioAudio
Asus Xonar STX with Sparkos I/V, Muse02 Buffer Noble K10C + labkable samurai  Audeze El-8 OB Bose Companion 
  hide details  
Reply
Crunching
(21 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 3770K @ 4.6ghz delidded ASUS P8Z77-V Pro  Evga GTX980TI Classified Corsair Vengeance DDR3 1600 8GB Kit  
Hard DriveHard DriveHard DriveOptical Drive
Samsung Pro 256GB Solid State  WD Caviar Black 72000rpm 1.5TB WD Caviar Black 72000rpm 4TB LG 14X blu-ray writer 
CoolingCoolingCoolingCooling
EK 12mm acrylic loop EK-Supremacy EVO, EK-FC780 GTX Classy XE 480, XE 240 EK-XRES 140 Revo D5 PWM with Multiport TOP 
CoolingMonitorPowerCase
phobya thermal sensor G1/4 Asus Pg279q Corsair ax1200i overkill Caselab SM8 Merlin 
AudioAudioAudioAudio
Asus Xonar STX with Sparkos I/V, Muse02 Buffer Noble K10C + labkable samurai  Audeze El-8 OB Bose Companion 
  hide details  
Reply
post #30598 of 34072
Quote:
Originally Posted by Castaile View Post

Thanks bluej
How was your experience applying CLU onto the waterblock?

I applied it direct on the die, a couple times actually as i was doing some testing. I would recommend however that you put some nail polish or clearcoat or anything that will harden over the transistors on the pcb just because its better to be safe then sorry.

It was easy to apply, super easy. I trimmed the brush so it didnt absorb as much and you can always add a tiny bit more if you notice your temps aren't where they should be. I did test it with some pressure paper and it tends to sit more on the cpu socket then on the die but my temps are still awesome so idc lol. Now that temps have warmed up my 4690k at 1.2v reaches around 50-51°C after an hr of Rainbow Six Siege. I get the same temps in Intel Tuning Stress Test so its def cpu heavy in multiplayer.

I don't regret it, all i had to do was change 4 screws. I will however say i was hoping it would put a tiny bit more pressure on the die would prob get even better temps but no biggie. I stay under 60°C at 1.3v if i choose to go to 4.8ghz so can't complain. Dont have ac either so results will vary.
    
CPUMotherboardGraphicsRAM
R7 1700X asus crosshair 6 Sapphire R9 390 Nitro CMK16GX4M2B3200C16 
Hard DriveHard DriveCoolingCooling
Kingston HyperX 3K Seagate ST2000DM006 EKWB Supremacy Evo EK-XRES 100 Revo D5 - Acetal 
CoolingCoolingCoolingCooling
Alphacool GPX r9 390 m01 alphacool xt45 240 Alphacool xt45 360 Alphacool D5 PWM 
OSMonitorKeyboardPower
Windows 10 LG 29UM68 Corsair Strafe Corsair RM1000 
CaseMouseMouse Pad
Thermaltake X5 Corsair M65 Pro RGB Razer Goliathus Speed 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
R7 1700X asus crosshair 6 Sapphire R9 390 Nitro CMK16GX4M2B3200C16 
Hard DriveHard DriveCoolingCooling
Kingston HyperX 3K Seagate ST2000DM006 EKWB Supremacy Evo EK-XRES 100 Revo D5 - Acetal 
CoolingCoolingCoolingCooling
Alphacool GPX r9 390 m01 alphacool xt45 240 Alphacool xt45 360 Alphacool D5 PWM 
OSMonitorKeyboardPower
Windows 10 LG 29UM68 Corsair Strafe Corsair RM1000 
CaseMouseMouse Pad
Thermaltake X5 Corsair M65 Pro RGB Razer Goliathus Speed 
  hide details  
Reply
post #30599 of 34072
Quote:
Originally Posted by bluej511 View Post

It stained my IHS as well pretty sure thats nickel plated copper as well. Its not an issue though unless you have the bottom of your heatsink on show (not possible btw haha).

Theres not much temp difference between TIM and LM BUT the big issue is that TIMs for wtv reason on a bare die tend to push/press out. I think thats why the intel tim is so awesome because it doesnt push out at all.

I know have NT-H1 on my IH/block. One difference I have noticed with CLU is that it cools off very quickly, or doesn't retain heat as much, compared to normal TIMs.
    
CPUMotherboardGraphicsGraphics
Intel Core i7-4790K 4.0GHz Quad-Core Processor Asus MAXIMUS VII FORMULA ATX LGA1150 Motherboard  EVGA GeForce GTX 980 Ti 6GB Classified ACX 2.0+... EK-FC780 GTX Classy - Acetal+Nickel 
RAMHard DriveHard DriveHard Drive
Klevv Genuine 16GB (2 x 8GB) 240-Pin DDR3 SDRAM... Seagate Barracuda 3TB 3.5" 7200RPM Internal Har... Western Digital BLACK SERIES 3TB 3.5" 7200RPM I... Samsung 850 EVO 500GB 
Hard DriveCoolingCoolingCooling
Samsung 950 Pro Swiftech H240-X CPU Liquid Cooling Kit HardwareLabs Black Ice Nemesis GTS X-Flow 280mm Noctua NF-A14 industrialPPC-2000 PWM 107.4 CFM ... 
CoolingOSMonitorKeyboard
CooLaboratory Liquid Ultra Windows 10 Professional 64-bit Pioneer Kuro PDP-5020FD 50-Inch Class (49.85'' ... Logitech Illuminated Living-Room Keyboard K830 
PowerCaseMouseOther
EVGA 850W 80+ Gold Certified Fully-Modular ATX ... Phanteks Enthoo Evolv ATX Tempered Glass Editio... Logitech G400 Professional Gaming Mouse MX518 Fanatec ClubSport Wheel Base V2 US 
OtherOtherOtherOther
Fanatec ClubSport Steering Wheel BMW M3 GT2 US Fanatec ClubSport Steering Wheel Formula US Fanatec ClubSport Shifter SQ US Fanatec ClubSport Pedals V2 US 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
Intel Core i7-4790K 4.0GHz Quad-Core Processor Asus MAXIMUS VII FORMULA ATX LGA1150 Motherboard  EVGA GeForce GTX 980 Ti 6GB Classified ACX 2.0+... EK-FC780 GTX Classy - Acetal+Nickel 
RAMHard DriveHard DriveHard Drive
Klevv Genuine 16GB (2 x 8GB) 240-Pin DDR3 SDRAM... Seagate Barracuda 3TB 3.5" 7200RPM Internal Har... Western Digital BLACK SERIES 3TB 3.5" 7200RPM I... Samsung 850 EVO 500GB 
Hard DriveCoolingCoolingCooling
Samsung 950 Pro Swiftech H240-X CPU Liquid Cooling Kit HardwareLabs Black Ice Nemesis GTS X-Flow 280mm Noctua NF-A14 industrialPPC-2000 PWM 107.4 CFM ... 
CoolingOSMonitorKeyboard
CooLaboratory Liquid Ultra Windows 10 Professional 64-bit Pioneer Kuro PDP-5020FD 50-Inch Class (49.85'' ... Logitech Illuminated Living-Room Keyboard K830 
PowerCaseMouseOther
EVGA 850W 80+ Gold Certified Fully-Modular ATX ... Phanteks Enthoo Evolv ATX Tempered Glass Editio... Logitech G400 Professional Gaming Mouse MX518 Fanatec ClubSport Wheel Base V2 US 
OtherOtherOtherOther
Fanatec ClubSport Steering Wheel BMW M3 GT2 US Fanatec ClubSport Steering Wheel Formula US Fanatec ClubSport Shifter SQ US Fanatec ClubSport Pedals V2 US 
  hide details  
Reply
post #30600 of 34072
Quote:
Originally Posted by paskowitz View Post

I know have NT-H1 on my IH/block. One difference I have noticed with CLU is that it cools off very quickly, or doesn't retain heat as much, compared to normal TIMs.

That's because CLU and CLP have a very high level of thermal conductivity. That's why they're awesome! biggrin.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide