Originally Posted by theGucky
I'm hoping to get my Delid-Die-Mate 2 this Week.
My Current PC (less then a Month old):
AIO be Quiet! Silent Loop with 280mm Rad and 2x140mm Stock Pure Wing 2 Fans.
ASUS IX HERO (Z270)
2x8GB 3200MHz Corsair Vengeance RAM (Running on 3200MHz XMP)
ASUS STRIX GTX 1080 TI
An 5 Year old Gold 660W PSU from Seasonic (scavanged from my old PC, hey Quality build for life)
atm my CPU is at 60-65°C under full load at baseclock with 1,296V Vcore and 1,280V LCC
Tested it with Multiplicator on 50 = 5.004GHz no change on other settings.
Ran with Cinebench R15 and Prime 95 for about 5 min....
Temp was about 90-92°C and Vcore about 1,380V (dont know the exact V anymore)
I didnt want it to run too long at 90°C to I reversed the OC. But still I didn't have a BSoD.
My Preparation for delidding:
First this Vid. Nice step by step from a neat German:
What im gonna do:
On-Die Tim: TG Conductonaut
IHS TIM: TG Kryonaut
LM on Die and downside of IHS.
No taping at all (im confident that im not gonna spill anything)
Quality Black Silicon (UHU) put on like original.
My idea is having it at 50°C or less at Baseclock (5GHz at maybe 70°C) after delidding. So I hope for around 20 less.
Did i get a good CPU?
It wasn't pretested or binned. Just bought regulary as bulk.
Do you want Pictures from delidding?
I havent found Pictures from how putting the IHS back on for the Delid device i intend to use.
Does it matter if i make the LM on the Die thicker in the Mid then on the edge? That should prevent airbubbles, doesnt it? And yeah it does sound far more easy then to actually do it XD At least the tighthly bound cottonswaps from the Conductonaut are far better then the brush from CLU.