Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 331

post #3301 of 33576
Quote:
Originally Posted by Notion View Post


Aaaah there we go.. thought i had seen it somewhere .. thanks for clearing that one up VonDutch!

So that brings me back to original Q.. is it possible to get higher Ghz with less Voltage, yet Higher temps...

(

Normally, higher GHz requires more voltage and results in higher temps.

We all want to optimize our voltage settings by trying to find just enough vcore to allow our chips to remain stable at a given OC freq. - Thus, too little vcore and the system is not stable, yet too much vcore is a waste and adds extra temp. Lots of time can be put into trying to find the optimum voltage settings.

As to your question of "is it possible to get higher Ghz with less Voltage, yet Higher temps..." I'd think not likely, and only if the voltage was not yet optimized for the given OC and your cooling system was going bad at the same time! LOL If you lower your vcore and can still get higher OC, then your temps will most likely be the same or going down.

A further note, as a chip runs cooler it can handle more vcore and also obtain even higher OC freqs.

Hope we have answered your questions, and if others have a better answer I'm all ears!
3770K Gaming Sys
(18 items)
 
   
CPUMotherboardGraphicsRAM
3770K 4.5GHz Asus Sabertooth Z77 EVGA Gtx560ti 448 FTW (2x SLI) 16GB Crucial Ballistic Tactical 1866 9-9-9-24 1T 
Hard DriveHard DriveHard DriveOptical Drive
120GB SanDisk Extreme SSD  1TB WD Black Caviar  2TB Seagate Barracuda TSSTcorp cd/dvd/bd 
CoolingOSMonitorKeyboard
Coursair H80 Win7 64 Acer 27" Wide LCD HD Logitech Black Illuminated 
PowerCaseMouseMouse Pad
Coursair AX850 Cooler Master HAF 922  Kensington Yep! w/wristpad! 
AudioAudio
Xonar DX 7.1 PCIe Logitech Z906 5.1 
CPUMotherboardGraphicsRAM
2500K 4.5GHZ 24/7 Ausu P8Z68-M Pro ATI 5770 Kingston Blue 1333 16GB 
Hard DriveHard DriveOptical DriveCooling
Sandisk Extream 120GB SSD 750GB HDD CD/DVD Cooler Master 212 EVO 
OSMonitorKeyboardPower
Win7 64bit 22" Flat Screen (non-wide) Yes! Corsair GS600 
CaseMouseMouse PadAudio
Cooler Master 912 Of course! nope intergrated & inexpensive speakers... 
  hide details  
Reply
3770K Gaming Sys
(18 items)
 
   
CPUMotherboardGraphicsRAM
3770K 4.5GHz Asus Sabertooth Z77 EVGA Gtx560ti 448 FTW (2x SLI) 16GB Crucial Ballistic Tactical 1866 9-9-9-24 1T 
Hard DriveHard DriveHard DriveOptical Drive
120GB SanDisk Extreme SSD  1TB WD Black Caviar  2TB Seagate Barracuda TSSTcorp cd/dvd/bd 
CoolingOSMonitorKeyboard
Coursair H80 Win7 64 Acer 27" Wide LCD HD Logitech Black Illuminated 
PowerCaseMouseMouse Pad
Coursair AX850 Cooler Master HAF 922  Kensington Yep! w/wristpad! 
AudioAudio
Xonar DX 7.1 PCIe Logitech Z906 5.1 
CPUMotherboardGraphicsRAM
2500K 4.5GHZ 24/7 Ausu P8Z68-M Pro ATI 5770 Kingston Blue 1333 16GB 
Hard DriveHard DriveOptical DriveCooling
Sandisk Extream 120GB SSD 750GB HDD CD/DVD Cooler Master 212 EVO 
OSMonitorKeyboardPower
Win7 64bit 22" Flat Screen (non-wide) Yes! Corsair GS600 
CaseMouseMouse PadAudio
Cooler Master 912 Of course! nope intergrated & inexpensive speakers... 
  hide details  
Reply
post #3302 of 33576
Hey Val! what's up buddy?

Ordered some ram myself...3x2gb ripjaws 2000mhz cl9-9-9-24 (PSC) yummy
post #3303 of 33576
Quote:
Originally Posted by Valgaur View Post


for your ram you can go to 1.7 volts for it. Push those things and get tight timings. Then run wprime and show me results im very eager. Good luck on the chip! thumb.gif

Also! ( gots the RAZER job woohoooooooo!!!! biggrin.gif

Great to hear Valgaur! Way to go!!! thumb.gif


question to everyone - is it OK to run mem chips beyond 1.65v on a Z77 without any special cooling?
3770K Gaming Sys
(18 items)
 
   
CPUMotherboardGraphicsRAM
3770K 4.5GHz Asus Sabertooth Z77 EVGA Gtx560ti 448 FTW (2x SLI) 16GB Crucial Ballistic Tactical 1866 9-9-9-24 1T 
Hard DriveHard DriveHard DriveOptical Drive
120GB SanDisk Extreme SSD  1TB WD Black Caviar  2TB Seagate Barracuda TSSTcorp cd/dvd/bd 
CoolingOSMonitorKeyboard
Coursair H80 Win7 64 Acer 27" Wide LCD HD Logitech Black Illuminated 
PowerCaseMouseMouse Pad
Coursair AX850 Cooler Master HAF 922  Kensington Yep! w/wristpad! 
AudioAudio
Xonar DX 7.1 PCIe Logitech Z906 5.1 
CPUMotherboardGraphicsRAM
2500K 4.5GHZ 24/7 Ausu P8Z68-M Pro ATI 5770 Kingston Blue 1333 16GB 
Hard DriveHard DriveOptical DriveCooling
Sandisk Extream 120GB SSD 750GB HDD CD/DVD Cooler Master 212 EVO 
OSMonitorKeyboardPower
Win7 64bit 22" Flat Screen (non-wide) Yes! Corsair GS600 
CaseMouseMouse PadAudio
Cooler Master 912 Of course! nope intergrated & inexpensive speakers... 
  hide details  
Reply
3770K Gaming Sys
(18 items)
 
   
CPUMotherboardGraphicsRAM
3770K 4.5GHz Asus Sabertooth Z77 EVGA Gtx560ti 448 FTW (2x SLI) 16GB Crucial Ballistic Tactical 1866 9-9-9-24 1T 
Hard DriveHard DriveHard DriveOptical Drive
120GB SanDisk Extreme SSD  1TB WD Black Caviar  2TB Seagate Barracuda TSSTcorp cd/dvd/bd 
CoolingOSMonitorKeyboard
Coursair H80 Win7 64 Acer 27" Wide LCD HD Logitech Black Illuminated 
PowerCaseMouseMouse Pad
Coursair AX850 Cooler Master HAF 922  Kensington Yep! w/wristpad! 
AudioAudio
Xonar DX 7.1 PCIe Logitech Z906 5.1 
CPUMotherboardGraphicsRAM
2500K 4.5GHZ 24/7 Ausu P8Z68-M Pro ATI 5770 Kingston Blue 1333 16GB 
Hard DriveHard DriveOptical DriveCooling
Sandisk Extream 120GB SSD 750GB HDD CD/DVD Cooler Master 212 EVO 
OSMonitorKeyboardPower
Win7 64bit 22" Flat Screen (non-wide) Yes! Corsair GS600 
CaseMouseMouse PadAudio
Cooler Master 912 Of course! nope intergrated & inexpensive speakers... 
  hide details  
Reply
post #3304 of 33576
Quote:
Originally Posted by PCWargamer View Post

Great to hear Valgaur! Way to go!!! thumb.gif
question to everyone - is it OK to run mem chips beyond 1.65v on a Z77 without any special cooling?

Yeah, you can go all the way up to 1.82v safely on most ram sticks even without heatsinks. Not all ram chips scale past 1.7v (like some Samsung chips, hyk0, hch9 to name a few), and some need cold to go further (like Elpida BBSE/Hypers, up to 2v lol)
post #3305 of 33576
Thread Starter 
Quote:
Originally Posted by ivanlabrie View Post

Hey Val! what's up buddy?
Ordered some ram myself...3x2gb ripjaws 2000mhz cl9-9-9-24 (PSC) yummy

I want those ripjaws so badly.... but I had to buy 60 bucks in gas....im broke now. mad.gif
Quote:
Originally Posted by PCWargamer View Post

Great to hear Valgaur! Way to go!!! thumb.gif
question to everyone - is it OK to run mem chips beyond 1.65v on a Z77 without any special cooling?

I know I can't wait to get their stuff and do reviews!
Quote:
Originally Posted by ivanlabrie View Post

Yeah, you can go all the way up to 1.82v safely on most ram sticks even without heatsinks. Not all ram chips scale past 1.7v (like some Samsung chips, hyk0, hch9 to name a few), and some need cold to go further (like Elpida BBSE/Hypers, up to 2v lol)

What he said. He's the ram nut for now tongue.gif
post #3306 of 33576
@ Work right now, but got it done this weekend with my i7 3770k.

Liquid Ultra inside and MX-2 outside.

I was running about Low 60s ( gotta check SSs at home ) before the the Delid @ 4.2ghz.

Seems to be at around 48-53 now after the delid. I'm running a CM 212 so it's a pretty mild cooling setup.

I'll post some Pics when I get home or later this week during the break.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 3770k Asrock Z77 Extreme4 NVIDIA GTX 680  Corsair 16GB  
Hard DriveOptical DriveOSMonitor
Crucial M4 256GB Lite-On DVD-R/RW Windows 7 Professional 64-bit Alienware Optx AW2310 
KeyboardPowerCaseMouse
Filco Majestouch Linear Force NKRO/Steelseries 7G Seasonic Platinum 1000W Antec 1100 Steelseries Kinzu / Razer Deathadder 3.5g 
Mouse Pad
Steelseries QcK+ 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 3770k Asrock Z77 Extreme4 NVIDIA GTX 680  Corsair 16GB  
Hard DriveOptical DriveOSMonitor
Crucial M4 256GB Lite-On DVD-R/RW Windows 7 Professional 64-bit Alienware Optx AW2310 
KeyboardPowerCaseMouse
Filco Majestouch Linear Force NKRO/Steelseries 7G Seasonic Platinum 1000W Antec 1100 Steelseries Kinzu / Razer Deathadder 3.5g 
Mouse Pad
Steelseries QcK+ 
  hide details  
Reply
post #3307 of 33576
Quote:
Originally Posted by nijikon5 View Post

@ Work right now, but got it done this weekend with my i7 3770k.
Liquid Ultra inside and MX-2 outside.
I was running about Low 60s ( gotta check SSs at home ) before the the Delid @ 4.2ghz.
Seems to be at around 48-53 now after the delid. I'm running a CM 212 so it's a pretty mild cooling setup.
I'll post some Pics when I get home or later this week during the break.

Very nice! Congrats on your succesful delid biggrin.gif
Now, push it higher than that, you won't see a big gain unless you clock it higher wink.gif
post #3308 of 33576
Well my cpu officially down under.

Got me 5.4ghz before dying..... was well worth the price to see these numbers.



Sent from my GT-I9300 using Tapatalk 2
Hydra
(13 items)
 
Hydra 2
(23 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 3930k @4.4ghz@1.44v Asrock X79 Fataility Champion 3xInno3d GTX 780 with Full Nickel EK Waterblocks Gskill RipjawsX 4x4GB@2400mhz 11-11-11-31 
Hard DriveCoolingMonitorKeyboard
2xSamsung 830 256gb Custom H2O - 3x XSPC RX360 with EK Blocks Surround Gaming 3x1440@96hz (X-Star) Cooler Master Trigger Red Caps 
PowerCaseMouseAudio
Seasonic 1250 watt Danger Den Double Wide 21 Roccat Kone+ Creative ZX (Incoming) 
Audio
Roccat Kave 5.1 Headphones 
CPUMotherboardGraphicsGraphics
4930k Asus Extreme Black Edition Sapphire R9 290x Sapphire R9 290x 
GraphicsGraphicsRAMHard Drive
Sapphire R9 290x Sapphire R9 290x Gskil TridentX 2400mhz Samsung 830 256GB 
Hard DriveCoolingCoolingCooling
Samsung 840 500GB EK Supramacy 4x EK Blocks 6x EK XTX480 
CoolingOSMonitorMonitor
EK XT360 Windows 8.1 BenQ 3201 32in 4k IPS Qnix 32in 1440 MVA 
MonitorKeyboardPowerCase
Qnix 32in 1440 MVA Coolermaster Storm Trigger 2x Seasonic 1250watt Case Labs TH10 
MouseAudioAudio
Roccat Kone Creative ZX AKG K7XX 
  hide details  
Reply
Hydra
(13 items)
 
Hydra 2
(23 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 3930k @4.4ghz@1.44v Asrock X79 Fataility Champion 3xInno3d GTX 780 with Full Nickel EK Waterblocks Gskill RipjawsX 4x4GB@2400mhz 11-11-11-31 
Hard DriveCoolingMonitorKeyboard
2xSamsung 830 256gb Custom H2O - 3x XSPC RX360 with EK Blocks Surround Gaming 3x1440@96hz (X-Star) Cooler Master Trigger Red Caps 
PowerCaseMouseAudio
Seasonic 1250 watt Danger Den Double Wide 21 Roccat Kone+ Creative ZX (Incoming) 
Audio
Roccat Kave 5.1 Headphones 
CPUMotherboardGraphicsGraphics
4930k Asus Extreme Black Edition Sapphire R9 290x Sapphire R9 290x 
GraphicsGraphicsRAMHard Drive
Sapphire R9 290x Sapphire R9 290x Gskil TridentX 2400mhz Samsung 830 256GB 
Hard DriveCoolingCoolingCooling
Samsung 840 500GB EK Supramacy 4x EK Blocks 6x EK XTX480 
CoolingOSMonitorMonitor
EK XT360 Windows 8.1 BenQ 3201 32in 4k IPS Qnix 32in 1440 MVA 
MonitorKeyboardPowerCase
Qnix 32in 1440 MVA Coolermaster Storm Trigger 2x Seasonic 1250watt Case Labs TH10 
MouseAudioAudio
Roccat Kone Creative ZX AKG K7XX 
  hide details  
Reply
post #3309 of 33576
Quote:
Originally Posted by ivanlabrie View Post

Very nice! Congrats on your succesful delid biggrin.gif
Now, push it higher than that, you won't see a big gain unless you clock it higher wink.gif

Thanks! I know.. I was a bit lazy and procrastinated. I wanted to push my pre-delid setup to see how far it could go.

Oh well, I only got SS's of it at 4.2 without CPU-Z turned on -_-;

Tried Liquid Ultra out/in but it didnt seem to make good contact with the 212.

Tried LMU in / MX-2 seemed to do pretty good.

Tried MX-2 / MX-2 not as good as #2 or #1.

Went back to LMU in / MX-2 out again and now I'm here.

I think I should be able to get to 4.8ghz pretty stable ( Hoping for high 60s-low 70s, but we'll see ).
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 3770k Asrock Z77 Extreme4 NVIDIA GTX 680  Corsair 16GB  
Hard DriveOptical DriveOSMonitor
Crucial M4 256GB Lite-On DVD-R/RW Windows 7 Professional 64-bit Alienware Optx AW2310 
KeyboardPowerCaseMouse
Filco Majestouch Linear Force NKRO/Steelseries 7G Seasonic Platinum 1000W Antec 1100 Steelseries Kinzu / Razer Deathadder 3.5g 
Mouse Pad
Steelseries QcK+ 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 3770k Asrock Z77 Extreme4 NVIDIA GTX 680  Corsair 16GB  
Hard DriveOptical DriveOSMonitor
Crucial M4 256GB Lite-On DVD-R/RW Windows 7 Professional 64-bit Alienware Optx AW2310 
KeyboardPowerCaseMouse
Filco Majestouch Linear Force NKRO/Steelseries 7G Seasonic Platinum 1000W Antec 1100 Steelseries Kinzu / Razer Deathadder 3.5g 
Mouse Pad
Steelseries QcK+ 
  hide details  
Reply
post #3310 of 33576
Thread Starter 
Quote:
Originally Posted by King4x4 View Post

Well my cpu officially down under.
Got me 5.4ghz before dying..... was well worth the price to see these numbers.
Sent from my GT-I9300 using Tapatalk 2

What vcore did you go up to?? And gratz on t,he score! Did you get a validation?
Quote:
Originally Posted by nijikon5 View Post

Thanks! I know.. I was a bit lazy and procrastinated. I wanted to push my pre-delid setup to see how far it could go.
Oh well, I only got SS's of it at 4.2 without CPU-Z turned on -_-;
Tried Liquid Ultra out/in but it didnt seem to make good contact with the 212.
Tried LMU in / MX-2 seemed to do pretty good.
Tried MX-2 / MX-2 not as good as #2 or #1.
Went back to LMU in / MX-2 out again and now I'm here.
I think I should be able to get to 4.8ghz pretty stable ( Hoping for high 60s-low 70s, but we'll see ).

Nice!! Keep it going and keep us informed.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide