Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 416

post #4151 of 33678
I like fine tuning vcore in Windows after finding a vcore that boots for a given oc. Much faster to me...
post #4152 of 33678
Thread Starter 
Quote:
Originally Posted by Jayjr1105 View Post

So I'm receiving an Ivy i7 3770K in a couple weeks here to replace my 2500K and was considering de-lidding. I was curious, when you delid, how does the retention mechanism clamp down on the CPU without the lid? Is the heatsink assembly then responsible for keeping the CPU clamped down in the socket for contact? Isn't the die extremely fragile to have the heatsink clamped down directly on it?
Thanks and sorry so many questions at once.

You still reuse the IHS unless you are going to direct die mount your heatsink but if you aren't wc it you can't due to undue stress. Also the IHS goes right back on since it disperses the heat and helps.
post #4153 of 33678
Quote:
Originally Posted by King4x4 View Post

Anybody said G1.Sniper 3 ?!

My hand is itching to retry delidding my new CPU (After my old delid failed on me rolleyes.gif)
Had an old friend say heat up the razor and go smoothly and I was going... no way mad.gif


What kind of problem did you have on your first delid?

I don't think heating up the razer is a good idea. I like holding blade in hand and carefully working it. Finger touch and feel is important to carefully do it IMO. Hot blade doesn't feel good on fingers.
B.K.T.
(24 items)
 
  
CPUMotherboardGraphicsGraphics
De-Lidded direct die mount Intel i7-4790k No IHS ASUS Z97 WS Sapphire HD7950 OC 950mhz Edition Sapphire HD7950 Vapor X 
RAMHard DriveHard DriveHard Drive
GSkill 2400mhz CL9  Samsung 840 caviar black Hitachi 
Hard DriveOptical DriveCoolingCooling
OCZ AGILITY 4 LG 16x BD burner DT Sniper CPU block Watercool HEATKILLER® GPU-X³ 79X0 Ni-Bl  
CoolingCoolingCoolingOS
Swiftech pump 655 Alphacool NexXxos UT 60 420mm 3x140mm Bgears 1800 RPM fans in pull on radiator Windows 7 Pro 64bit 
MonitorKeyboardPowerCase
BenQ XL2410T SS 6gv2 Seasonic Platinum 860 Silverstone Raven RV02-BW 
MouseMouseMouse PadAudio
Steel Series sensei Steel Series sensei SS Experience I-2, SS 9HD Audio Technica ATH-AD900 
  hide details  
Reply
B.K.T.
(24 items)
 
  
CPUMotherboardGraphicsGraphics
De-Lidded direct die mount Intel i7-4790k No IHS ASUS Z97 WS Sapphire HD7950 OC 950mhz Edition Sapphire HD7950 Vapor X 
RAMHard DriveHard DriveHard Drive
GSkill 2400mhz CL9  Samsung 840 caviar black Hitachi 
Hard DriveOptical DriveCoolingCooling
OCZ AGILITY 4 LG 16x BD burner DT Sniper CPU block Watercool HEATKILLER® GPU-X³ 79X0 Ni-Bl  
CoolingCoolingCoolingOS
Swiftech pump 655 Alphacool NexXxos UT 60 420mm 3x140mm Bgears 1800 RPM fans in pull on radiator Windows 7 Pro 64bit 
MonitorKeyboardPowerCase
BenQ XL2410T SS 6gv2 Seasonic Platinum 860 Silverstone Raven RV02-BW 
MouseMouseMouse PadAudio
Steel Series sensei Steel Series sensei SS Experience I-2, SS 9HD Audio Technica ATH-AD900 
  hide details  
Reply
post #4154 of 33678
The CPU itself is okay... but I nicked the PCB and I damaged the memory controller.

Only accepts one piece of ram.

OCs like a nut though... got it to 5ghz on 1.4v!

Hydra
(13 items)
 
Hydra 2
(23 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 3930k @4.4ghz@1.44v Asrock X79 Fataility Champion 3xInno3d GTX 780 with Full Nickel EK Waterblocks Gskill RipjawsX 4x4GB@2400mhz 11-11-11-31 
Hard DriveCoolingMonitorKeyboard
2xSamsung 830 256gb Custom H2O - 3x XSPC RX360 with EK Blocks Surround Gaming 3x1440@96hz (X-Star) Cooler Master Trigger Red Caps 
PowerCaseMouseAudio
Seasonic 1250 watt Danger Den Double Wide 21 Roccat Kone+ Creative ZX (Incoming) 
Audio
Roccat Kave 5.1 Headphones 
CPUMotherboardGraphicsGraphics
4930k Asus Extreme Black Edition Sapphire R9 290x Sapphire R9 290x 
GraphicsGraphicsRAMHard Drive
Sapphire R9 290x Sapphire R9 290x Gskil TridentX 2400mhz Samsung 830 256GB 
Hard DriveCoolingCoolingCooling
Samsung 840 500GB EK Supramacy 4x EK Blocks 6x EK XTX480 
CoolingOSMonitorMonitor
EK XT360 Windows 8.1 BenQ 3201 32in 4k IPS Qnix 32in 1440 MVA 
MonitorKeyboardPowerCase
Qnix 32in 1440 MVA Coolermaster Storm Trigger 2x Seasonic 1250watt Case Labs TH10 
MouseAudioAudio
Roccat Kone Creative ZX AKG K7XX 
  hide details  
Reply
Hydra
(13 items)
 
Hydra 2
(23 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 3930k @4.4ghz@1.44v Asrock X79 Fataility Champion 3xInno3d GTX 780 with Full Nickel EK Waterblocks Gskill RipjawsX 4x4GB@2400mhz 11-11-11-31 
Hard DriveCoolingMonitorKeyboard
2xSamsung 830 256gb Custom H2O - 3x XSPC RX360 with EK Blocks Surround Gaming 3x1440@96hz (X-Star) Cooler Master Trigger Red Caps 
PowerCaseMouseAudio
Seasonic 1250 watt Danger Den Double Wide 21 Roccat Kone+ Creative ZX (Incoming) 
Audio
Roccat Kave 5.1 Headphones 
CPUMotherboardGraphicsGraphics
4930k Asus Extreme Black Edition Sapphire R9 290x Sapphire R9 290x 
GraphicsGraphicsRAMHard Drive
Sapphire R9 290x Sapphire R9 290x Gskil TridentX 2400mhz Samsung 830 256GB 
Hard DriveCoolingCoolingCooling
Samsung 840 500GB EK Supramacy 4x EK Blocks 6x EK XTX480 
CoolingOSMonitorMonitor
EK XT360 Windows 8.1 BenQ 3201 32in 4k IPS Qnix 32in 1440 MVA 
MonitorKeyboardPowerCase
Qnix 32in 1440 MVA Coolermaster Storm Trigger 2x Seasonic 1250watt Case Labs TH10 
MouseAudioAudio
Roccat Kone Creative ZX AKG K7XX 
  hide details  
Reply
post #4155 of 33678
King4x4 have you tried it in a different mother board?
B.K.T.
(24 items)
 
  
CPUMotherboardGraphicsGraphics
De-Lidded direct die mount Intel i7-4790k No IHS ASUS Z97 WS Sapphire HD7950 OC 950mhz Edition Sapphire HD7950 Vapor X 
RAMHard DriveHard DriveHard Drive
GSkill 2400mhz CL9  Samsung 840 caviar black Hitachi 
Hard DriveOptical DriveCoolingCooling
OCZ AGILITY 4 LG 16x BD burner DT Sniper CPU block Watercool HEATKILLER® GPU-X³ 79X0 Ni-Bl  
CoolingCoolingCoolingOS
Swiftech pump 655 Alphacool NexXxos UT 60 420mm 3x140mm Bgears 1800 RPM fans in pull on radiator Windows 7 Pro 64bit 
MonitorKeyboardPowerCase
BenQ XL2410T SS 6gv2 Seasonic Platinum 860 Silverstone Raven RV02-BW 
MouseMouseMouse PadAudio
Steel Series sensei Steel Series sensei SS Experience I-2, SS 9HD Audio Technica ATH-AD900 
  hide details  
Reply
B.K.T.
(24 items)
 
  
CPUMotherboardGraphicsGraphics
De-Lidded direct die mount Intel i7-4790k No IHS ASUS Z97 WS Sapphire HD7950 OC 950mhz Edition Sapphire HD7950 Vapor X 
RAMHard DriveHard DriveHard Drive
GSkill 2400mhz CL9  Samsung 840 caviar black Hitachi 
Hard DriveOptical DriveCoolingCooling
OCZ AGILITY 4 LG 16x BD burner DT Sniper CPU block Watercool HEATKILLER® GPU-X³ 79X0 Ni-Bl  
CoolingCoolingCoolingOS
Swiftech pump 655 Alphacool NexXxos UT 60 420mm 3x140mm Bgears 1800 RPM fans in pull on radiator Windows 7 Pro 64bit 
MonitorKeyboardPowerCase
BenQ XL2410T SS 6gv2 Seasonic Platinum 860 Silverstone Raven RV02-BW 
MouseMouseMouse PadAudio
Steel Series sensei Steel Series sensei SS Experience I-2, SS 9HD Audio Technica ATH-AD900 
  hide details  
Reply
post #4156 of 33678
Quote:
Originally Posted by Valgaur View Post

You still reuse the IHS unless you are going to direct die mount your heatsink but if you aren't wc it you can't due to undue stress. Also the IHS goes right back on since it disperses the heat and helps.

So the whole de-lid thing is just to replace the paste between the die and IHS? That makes a lot more sense biggrin.gif Do you have to re-glue the IHS back on or simply rely on the paste to hold it in place?
Edited by Jayjr1105 - 11/30/12 at 1:36pm
I have Ryzen!
(13 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen 5 1600 3.7GHz 1.3v MSI B350M Mortar Arctic Asus Strix RX470 4GB Corsair Vengance LPX 3200 16GB 
Hard DriveHard DriveCoolingOS
Intel 520 240GB Transcend 480GB Wraith Spire Windows 10 Pro x64 
MonitorKeyboardPowerCase
Dell UltraSharp U2412M CM Quick Fire (Brown Switches) Rosewill Valens 500W Gold Corsiar Carbide Air 240 
Mouse
Zowie 
  hide details  
Reply
I have Ryzen!
(13 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen 5 1600 3.7GHz 1.3v MSI B350M Mortar Arctic Asus Strix RX470 4GB Corsair Vengance LPX 3200 16GB 
Hard DriveHard DriveCoolingOS
Intel 520 240GB Transcend 480GB Wraith Spire Windows 10 Pro x64 
MonitorKeyboardPowerCase
Dell UltraSharp U2412M CM Quick Fire (Brown Switches) Rosewill Valens 500W Gold Corsiar Carbide Air 240 
Mouse
Zowie 
  hide details  
Reply
post #4157 of 33678
Quote:
Originally Posted by Jayjr1105 View Post

So the whole de-lid thing is just to replace the paste between the die and IHS? That makes a lot more sense biggrin.gif Do you have to re-glue the IHS back on or simply rely on the paste to hold it in place?


Add your favorite TIM and get the best mount possible.
B.K.T.
(24 items)
 
  
CPUMotherboardGraphicsGraphics
De-Lidded direct die mount Intel i7-4790k No IHS ASUS Z97 WS Sapphire HD7950 OC 950mhz Edition Sapphire HD7950 Vapor X 
RAMHard DriveHard DriveHard Drive
GSkill 2400mhz CL9  Samsung 840 caviar black Hitachi 
Hard DriveOptical DriveCoolingCooling
OCZ AGILITY 4 LG 16x BD burner DT Sniper CPU block Watercool HEATKILLER® GPU-X³ 79X0 Ni-Bl  
CoolingCoolingCoolingOS
Swiftech pump 655 Alphacool NexXxos UT 60 420mm 3x140mm Bgears 1800 RPM fans in pull on radiator Windows 7 Pro 64bit 
MonitorKeyboardPowerCase
BenQ XL2410T SS 6gv2 Seasonic Platinum 860 Silverstone Raven RV02-BW 
MouseMouseMouse PadAudio
Steel Series sensei Steel Series sensei SS Experience I-2, SS 9HD Audio Technica ATH-AD900 
  hide details  
Reply
B.K.T.
(24 items)
 
  
CPUMotherboardGraphicsGraphics
De-Lidded direct die mount Intel i7-4790k No IHS ASUS Z97 WS Sapphire HD7950 OC 950mhz Edition Sapphire HD7950 Vapor X 
RAMHard DriveHard DriveHard Drive
GSkill 2400mhz CL9  Samsung 840 caviar black Hitachi 
Hard DriveOptical DriveCoolingCooling
OCZ AGILITY 4 LG 16x BD burner DT Sniper CPU block Watercool HEATKILLER® GPU-X³ 79X0 Ni-Bl  
CoolingCoolingCoolingOS
Swiftech pump 655 Alphacool NexXxos UT 60 420mm 3x140mm Bgears 1800 RPM fans in pull on radiator Windows 7 Pro 64bit 
MonitorKeyboardPowerCase
BenQ XL2410T SS 6gv2 Seasonic Platinum 860 Silverstone Raven RV02-BW 
MouseMouseMouse PadAudio
Steel Series sensei Steel Series sensei SS Experience I-2, SS 9HD Audio Technica ATH-AD900 
  hide details  
Reply
post #4158 of 33678
Quote:
Originally Posted by Jayjr1105 View Post

So the whole de-lid thing is just to replace the paste between the die and IHS? That makes a lot more sense biggrin.gif Do you have to re-glue the IHS back on or simply rely on the paste to hold it in place?
No glueing required, you just put the IHS back onto the PCB, close the bracket holding the CPU in place, and it should latch onto the 2 lips sticking out a bit from the IHS, keeping the whole assembly locked into place tightly smile.gif
Behemoth
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 5960x Rampage V Extreme Titan X Pascal Corsair Vengeance LPX [16GB DDR4 @ 2666MHz] 
Hard DriveHard DriveCoolingOS
Samsung 950 Pro M.2 512GB Synology NAS [10 drives] Custom loop [mostly EKWB] Windows 10 Pro 
MonitorMonitorKeyboardPower
ASUS PG279Q Dell UltraSharp UP2716D Das Keyboard Professional 4 Corsair HX1200i 
CaseMouseOtherOther
Phanteks Enthoo Primo Logitech G900 Beyerdynamic Custom One Pro Rode NT-USB 
  hide details  
Reply
Behemoth
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 5960x Rampage V Extreme Titan X Pascal Corsair Vengeance LPX [16GB DDR4 @ 2666MHz] 
Hard DriveHard DriveCoolingOS
Samsung 950 Pro M.2 512GB Synology NAS [10 drives] Custom loop [mostly EKWB] Windows 10 Pro 
MonitorMonitorKeyboardPower
ASUS PG279Q Dell UltraSharp UP2716D Das Keyboard Professional 4 Corsair HX1200i 
CaseMouseOtherOther
Phanteks Enthoo Primo Logitech G900 Beyerdynamic Custom One Pro Rode NT-USB 
  hide details  
Reply
post #4159 of 33678
I cleared the CMOS, I have everything on stock values, I turned off EPU and TPU and my CPU is still stuck at 1.6GHz under load. I'm about to RMA motherboard and chip....
post #4160 of 33678
Quote:
Originally Posted by stickg1 View Post

I cleared the CMOS, I have everything on stock values, I turned off EPU and TPU and my CPU is still stuck at 1.6GHz under load. I'm about to RMA motherboard and chip....

You followed everything on the guide?

If u give me ur IP i can tune ur Bios Via my Ipad wink.gif

Cause u overclocked Vishera bro.. Ivy Bridge is overclocking Noob Sauce lol.

I do not have an Asus board or i could be more help..

Did u turn turbo boost off?

Have u tried overclocking with software from the desktop yet?
Edited by Hokies83 - 11/30/12 at 4:43pm
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide