Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 439

post #4381 of 33538
Quote:
Originally Posted by Imprezzion View Post

Do you guys think I should delid my 3570k?
I'm running the new H100i on a P8Z77-V Pro board and i got up to 4.6Ghz on 1.216v and I know it can do 4.8Ghz on 1.296v only it gets a tad hot then under max stress... As in 77-87-85-81 during LinX... Prime95 is about 2-3c less but still...
Is the combination of H100i + P8Z77-V Pro usable delidded? Or only with the IHS back on so I can just change the paste..

i wouldnt delid if not necessary, if you run into high temps with just a little oc, maybe then smile.gif
i delidded because i couldnt even run prime at 4.5ghz, without hitting 105C,
i know what throtteling and shutting down core is first hand ..lol

your mobo and cooler are very nice to use, delidded or not smile.gif
running prime at 4.8ghz, and hottest core about 80-85C is great really,
for not delidded chip that is thumb.gif

i would leave the ihs on after delid, no hassle..
Edited by VonDutch - 12/4/12 at 6:33am
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
post #4382 of 33538
Quote:
Originally Posted by chris-br View Post

heh, i did a 4.7 run last night @ 1,404v (yeah i know is high, but still unstable, getting WHEA erros) and temps never got to the 65 mark yet.
Oh yeah, update my info please Valgaur.

yea, looks a bit high to me too, you sure you have all settings right ?
could be something else messing up your oc?, is that using offset or fixed vcore?
are you using xmp profile for your ram?
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
post #4383 of 33538
Quote:
Originally Posted by VonDutch View Post

yea, looks a bit high to me too, you sure you have all settings right ?
could be something else messing up your oc?, is that using offset or fixed vcore?
are you using xmp profile for your ram?

Fixed voltage and xmp profile for ram. I always do fixed vcore for testing new clocks. I noticed that vcore gets unstable as goes up.. LLC is on turbo. cpu pll @ 1,600.

EDIT: Well. After putting the CPU back on, should i reset bios? Because i didn't.

Edit2:
clock bios cpuz
4.5 1.315 1.308
4.6 1.35 1.344
4.7 1.4 1.392

That's from testing last night.
Edited by chris-br - 12/4/12 at 6:53am
post #4384 of 33538
Quote:
Originally Posted by chris-br View Post

Fixed voltage and xmp profile for ram. I always do fixed vcore for testing new clocks. I noticed that vcore gets unstable as goes up.. LLC is on turbo. cpu pll @ 1,600.
EDIT: Well. After putting the CPU back on, should i reset bios? Because i didn't.

Edit2:
clock bios cpuz
4.5 1.315 1.308
4.6 1.35 1.344
4.7 1.4 1.392

That's from testing last night.

yea, i asked about the xmp profile, because i had some problems running it when i oced,
then they told me to leave it at auto, and i just puty in the 16x multi, after i was done ocing,
i tried to use the xmp profile again, got it to work now..
you could always try right smile.gif
dont think you need to reset bios after getting cpu out , and putting it in again,
but sometimes i just like to start over with a oc, and do a clear cmos,
done all settings so many times now, takes just a few min to do a oc..

a while ago someone said to me, dont lower cpu pll with higher oc's, leave as is, 1.8V or auto..
it can make a oc stable, and lower temps a bit, but thats not our worry anymore so ..

looking at testresults from last nite,
you might hit max when you do 4.8ghz, prolly close to 1.5V vcore to get it stable,
my chip isnt a very good one either, but can run 4.8ghz 1.420V vcore 24H prime stable,
need about 1.510V vcore for 4.9ghz..
Edited by VonDutch - 12/4/12 at 7:06am
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
post #4385 of 33538
Quote:
Originally Posted by Imprezzion View Post

Do you guys think I should delid my 3570k?
I'm running the new H100i on a P8Z77-V Pro board and i got up to 4.6Ghz on 1.216v and I know it can do 4.8Ghz on 1.296v only it gets a tad hot then under max stress... As in 77-87-85-81 during LinX... Prime95 is about 2-3c less but still...
Is the combination of H100i + P8Z77-V Pro usable delidded? Or only with the IHS back on so I can just change the paste..


sorry for intromission, but i cannot reply due to private messages limitations.
Please send me another way to communicate by PM
post #4386 of 33538
Feniks, I'd say you should do some research on the way timings and subs react to each other. Ram ocing is more a matter of thorough research and testing of a gazillion combinations of timings and clocks more than voltages. I've gone up to 1.9v on bbse sticks btw, 1.7v is baby vdimm lol just don't go over 1.2v vccio and 1.15v vccsa and use 1.7v if your ram is rated for 1.65v it's nothing really.
There's a good ram ocing guide at overclockers.com, check it out wink.gif
post #4387 of 33538
Quote:
Originally Posted by ivanlabrie View Post

Feniks, I'd say you should do some research on the way timings and subs react to each other. Ram ocing is more a matter of thorough research and testing of a gazillion combinations of timings and clocks more than voltages. I've gone up to 1.9v on bbse sticks btw, 1.7v is baby vdimm lol just don't go over 1.2v vccio and 1.15v vccsa and use 1.7v if your ram is rated for 1.65v it's nothing really.
There's a good ram ocing guide at overclockers.com, check it out wink.gif

ivan ramboss in da house ...lol ..hey bud smile.gifthumb.gif
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
post #4388 of 33538
Quote:
Originally Posted by ivanlabrie View Post

I've gone up to 1.9v on bbse sticks btw, 1.7v is baby vdimm lol just don't go over 1.2v vccio and 1.15v vccsa and use 1.7v if your ram is rated for 1.65v it's nothing really.
There's a good ram ocing guide at overclockers.com, check it out wink.gif

Sin0822 posted this.

31e58fed_volts.png


Not sure if this chart was made with delidding in mind.
B.K.T.
(24 items)
 
  
CPUMotherboardGraphicsGraphics
De-Lidded direct die mount Intel i7-4790k No IHS ASUS Z97 WS Sapphire HD7950 OC 950mhz Edition Sapphire HD7950 Vapor X 
RAMHard DriveHard DriveHard Drive
GSkill 2400mhz CL9  Samsung 840 caviar black Hitachi 
Hard DriveOptical DriveCoolingCooling
OCZ AGILITY 4 LG 16x BD burner DT Sniper CPU block Watercool HEATKILLER® GPU-X³ 79X0 Ni-Bl  
CoolingCoolingCoolingOS
Swiftech pump 655 Alphacool NexXxos UT 60 420mm 3x140mm Bgears 1800 RPM fans in pull on radiator Windows 7 Pro 64bit 
MonitorKeyboardPowerCase
BenQ XL2410T SS 6gv2 Seasonic Platinum 860 Silverstone Raven RV02-BW 
MouseMouseMouse PadAudio
Steel Series sensei Steel Series sensei SS Experience I-2, SS 9HD Audio Technica ATH-AD900 
  hide details  
Reply
B.K.T.
(24 items)
 
  
CPUMotherboardGraphicsGraphics
De-Lidded direct die mount Intel i7-4790k No IHS ASUS Z97 WS Sapphire HD7950 OC 950mhz Edition Sapphire HD7950 Vapor X 
RAMHard DriveHard DriveHard Drive
GSkill 2400mhz CL9  Samsung 840 caviar black Hitachi 
Hard DriveOptical DriveCoolingCooling
OCZ AGILITY 4 LG 16x BD burner DT Sniper CPU block Watercool HEATKILLER® GPU-X³ 79X0 Ni-Bl  
CoolingCoolingCoolingOS
Swiftech pump 655 Alphacool NexXxos UT 60 420mm 3x140mm Bgears 1800 RPM fans in pull on radiator Windows 7 Pro 64bit 
MonitorKeyboardPowerCase
BenQ XL2410T SS 6gv2 Seasonic Platinum 860 Silverstone Raven RV02-BW 
MouseMouseMouse PadAudio
Steel Series sensei Steel Series sensei SS Experience I-2, SS 9HD Audio Technica ATH-AD900 
  hide details  
Reply
post #4389 of 33538
Whee just Snagged Gtx 570 for 75$
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
post #4390 of 33538
Quote:
Originally Posted by Hokies83 View Post

Whee just Snagged Gtx 570 for 75$

I would have snagged 3-4 of them if I were u smile.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide