Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 478

post #4771 of 33675
Will reseat, and check for concave or convex. I did clean all the glue off the IHS.

Just for reference, I get about 58c max temp under full load at stock clocks delidded.

EDIT: Just reseated, cleaned everything, and re-applied all TIM. Seeing about a 7c drop in temps just from that. I believe I may have used too much TIM on the die last time. at 4.6GHz 1.308VCore, my max temps are about 79c-80c in RealTempGT. (Does this read core or die temp?)

Also, everything looked good, no concave on the die, IHS, or my D14.

EDIT 2: Just out of curiosity, is it just that Ivy is not as good of an overclocker as Sandy per volt, or that we think it is more sensitive to volts on the 22nm fab process so we just don't go as high on the voltage? I was going to say that the higher Ivy OC's I see without special cooling are around 4.7-4.8GHz 24/7, while Sandy was 5-5.1GHz. However, while writing this, I realized that most of us, including me, would bring our Sandy's to 1.5VCore, while with Ivy it seems 1.4 is the highest useful voltage until it starts getting pretty hot. I believe this 3770k could hit the same speeds if I pumped that much voltage into it.

It took 1.536VCore to stabilize my 2600k at 5GHz, and that was a bad overclocker, I estimate it would take about 1.5-1.51VCore to stabilize this 3700k at 5GHz.
Edited by snelan - 12/8/12 at 6:16am
    
CPUMotherboardGraphicsRAM
i7 3770k Gigabyte Z77-UD5H-WB Golden GTX 670 Windforce 3X 2 x 4GB GSkill RipJawsX 
Hard DriveCoolingOSMonitor
OCZ Vertex 4 64GB- WD Caviar Black 1TB Noctua NH-D14 Windows 7 Dell U2311H IPS 
KeyboardPowerCaseMouse
xArmor iOne U9BL MX Blues Seasonic x750 LIAN LI PC-T60B Logitech G500 
Audio
Modded JVC HA-RX900 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 3770k Gigabyte Z77-UD5H-WB Golden GTX 670 Windforce 3X 2 x 4GB GSkill RipJawsX 
Hard DriveCoolingOSMonitor
OCZ Vertex 4 64GB- WD Caviar Black 1TB Noctua NH-D14 Windows 7 Dell U2311H IPS 
KeyboardPowerCaseMouse
xArmor iOne U9BL MX Blues Seasonic x750 LIAN LI PC-T60B Logitech G500 
Audio
Modded JVC HA-RX900 
  hide details  
Reply
post #4772 of 33675
Quote:
Originally Posted by SimpleTech View Post

He is asking how, not the program itself.
To update Linpack, first download the latest here (Windows package). Navigate to benchmarks\linpack\ and you will find two of the needed files, labeled linpack_xeon32.exe and linpack_xeon64.exe.
Rename them to:
linpack32.exe
linpack64.exe
And replace them in the LinData folder.
Simple as that.
The Linpack version in the latest IBT 2.54 on XtremeSystems has a Stamp Date: ‎Wednesday, ‎June ‎06, ‎2012 4:04:24 PM
The latest as of this post is ‎Wednesday, ‎October ‎10, ‎2012 1:31:12 PM


Thanks, my GFlops are around 100-120 range now.
post #4773 of 33675
Ok, so seeing pretty much the same temps as before again. ~88c at 4.7GHz, 1.355VCore. However, one core (Core 0) is just sitting at a happy 75c during these tests, while the others are at almost 90c!

Does this mean uneven TIM on the die?
    
CPUMotherboardGraphicsRAM
i7 3770k Gigabyte Z77-UD5H-WB Golden GTX 670 Windforce 3X 2 x 4GB GSkill RipJawsX 
Hard DriveCoolingOSMonitor
OCZ Vertex 4 64GB- WD Caviar Black 1TB Noctua NH-D14 Windows 7 Dell U2311H IPS 
KeyboardPowerCaseMouse
xArmor iOne U9BL MX Blues Seasonic x750 LIAN LI PC-T60B Logitech G500 
Audio
Modded JVC HA-RX900 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 3770k Gigabyte Z77-UD5H-WB Golden GTX 670 Windforce 3X 2 x 4GB GSkill RipJawsX 
Hard DriveCoolingOSMonitor
OCZ Vertex 4 64GB- WD Caviar Black 1TB Noctua NH-D14 Windows 7 Dell U2311H IPS 
KeyboardPowerCaseMouse
xArmor iOne U9BL MX Blues Seasonic x750 LIAN LI PC-T60B Logitech G500 
Audio
Modded JVC HA-RX900 
  hide details  
Reply
post #4774 of 33675
Most likely. You will see a BIG difference on temps when you use the Liquid pro. Trust me. smile.gif

Edit: i did use mx-4 before using the LP, from the start the temps dropped 12c, but after a while i was getting worse and worse temps... Once i got the LP and went to apply, i saw that the mx-4 was kinda dry and hard... So after the LP, i got like 27C drop on temps... I highly recommended it.
Edited by chris-br - 12/8/12 at 6:50am
post #4775 of 33675
Quote:
Originally Posted by chris-br View Post

Most likely. You will see a BIG difference on temps when you use the Liquid pro. Trust me. smile.gif

Yea, I was just looking at the specs of Liquid Pro, it has a heat thermal conductivity rating of around 82w/Mk, while I believe MX-4 is about 9w/Mk, correct me if I am wrong. That's like using a rock vs an ice cube.
    
CPUMotherboardGraphicsRAM
i7 3770k Gigabyte Z77-UD5H-WB Golden GTX 670 Windforce 3X 2 x 4GB GSkill RipJawsX 
Hard DriveCoolingOSMonitor
OCZ Vertex 4 64GB- WD Caviar Black 1TB Noctua NH-D14 Windows 7 Dell U2311H IPS 
KeyboardPowerCaseMouse
xArmor iOne U9BL MX Blues Seasonic x750 LIAN LI PC-T60B Logitech G500 
Audio
Modded JVC HA-RX900 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 3770k Gigabyte Z77-UD5H-WB Golden GTX 670 Windforce 3X 2 x 4GB GSkill RipJawsX 
Hard DriveCoolingOSMonitor
OCZ Vertex 4 64GB- WD Caviar Black 1TB Noctua NH-D14 Windows 7 Dell U2311H IPS 
KeyboardPowerCaseMouse
xArmor iOne U9BL MX Blues Seasonic x750 LIAN LI PC-T60B Logitech G500 
Audio
Modded JVC HA-RX900 
  hide details  
Reply
post #4776 of 33675
Right, so temps are definately down, by alot - Will post a picture as soon as I figured out the BIOS and settled at a overclock, because the z77x-UD7 sure as f*** got a HUGE BIOS to work through.

Did a SUPER cut and slash 4.8 Ghz @ 1.385 (I know it can do it at less, but just wanted to check temps.) - Average temps at around 55C after 10 runs with IntelBurnTest, The MO-RA3 is running semi-passive (700RPM on the fans), lol.

So yah, delid is really the way to go smile.gif
Frozen Kaveri
(11 items)
 
 
CPUMotherboardGraphicsRAM
A10-7850K Gigabyte F2A88X-UP4 XFX R7 250 G.SKILL TridentX 2400Mhz CL9 
Hard DriveHard DriveHard DriveCooling
Samsung EVO 120GB Samsung EVO 120GB Crucial M500 240GB Little Devil Phasechange 
OSPowerCase
Windows 8.1 Corsair AX860i Lian Li PC-A51 
CPUMotherboardGraphicsRAM
4770K  ROG Maximus VI Impact HD 7990 Corsair Platinum 2666Mhz 
Hard DriveCoolingCoolingCooling
Samsung 830 SSD 3 x Alphacool NexXxoS UT60 240 EK Supremacy Precise Mount Add-On Naked Ivy CPU... EK Supremacy - Clean full nickel 
CoolingCoolingOSPower
Alphacool Heatmaster II Gentle Typhoon 1850RPM Windows 7 X64 Silverstone Strider Evolution 750W 
Case
Caselabs S3 w. pedestal 
  hide details  
Reply
Frozen Kaveri
(11 items)
 
 
CPUMotherboardGraphicsRAM
A10-7850K Gigabyte F2A88X-UP4 XFX R7 250 G.SKILL TridentX 2400Mhz CL9 
Hard DriveHard DriveHard DriveCooling
Samsung EVO 120GB Samsung EVO 120GB Crucial M500 240GB Little Devil Phasechange 
OSPowerCase
Windows 8.1 Corsair AX860i Lian Li PC-A51 
CPUMotherboardGraphicsRAM
4770K  ROG Maximus VI Impact HD 7990 Corsair Platinum 2666Mhz 
Hard DriveCoolingCoolingCooling
Samsung 830 SSD 3 x Alphacool NexXxoS UT60 240 EK Supremacy Precise Mount Add-On Naked Ivy CPU... EK Supremacy - Clean full nickel 
CoolingCoolingOSPower
Alphacool Heatmaster II Gentle Typhoon 1850RPM Windows 7 X64 Silverstone Strider Evolution 750W 
Case
Caselabs S3 w. pedestal 
  hide details  
Reply
post #4777 of 33675
Quote:
Originally Posted by Gomi View Post

Right, so temps are definately down, by alot - Will post a picture as soon as I figured out the BIOS and settled at a overclock, because the z77x-UD7 sure as f*** got a HUGE BIOS to work through.
Did a SUPER cut and slash 4.8 Ghz @ 1.385 (I know it can do it at less, but just wanted to check temps.) - Average temps at around 55C after 10 runs with IntelBurnTest, The MO-RA3 is running semi-passive (700RPM on the fans), lol.
So yah, delid is really the way to go smile.gif

Dude, you make me want to make another custom loop. I ran a Rasa loop with my 2600k, but if I tried 1.385v on this D14, I would be at around 100c lol.

Are you using Liquid Pro?
    
CPUMotherboardGraphicsRAM
i7 3770k Gigabyte Z77-UD5H-WB Golden GTX 670 Windforce 3X 2 x 4GB GSkill RipJawsX 
Hard DriveCoolingOSMonitor
OCZ Vertex 4 64GB- WD Caviar Black 1TB Noctua NH-D14 Windows 7 Dell U2311H IPS 
KeyboardPowerCaseMouse
xArmor iOne U9BL MX Blues Seasonic x750 LIAN LI PC-T60B Logitech G500 
Audio
Modded JVC HA-RX900 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 3770k Gigabyte Z77-UD5H-WB Golden GTX 670 Windforce 3X 2 x 4GB GSkill RipJawsX 
Hard DriveCoolingOSMonitor
OCZ Vertex 4 64GB- WD Caviar Black 1TB Noctua NH-D14 Windows 7 Dell U2311H IPS 
KeyboardPowerCaseMouse
xArmor iOne U9BL MX Blues Seasonic x750 LIAN LI PC-T60B Logitech G500 
Audio
Modded JVC HA-RX900 
  hide details  
Reply
post #4778 of 33675
Quote:
Originally Posted by snelan View Post

Dude, you make me want to make another custom loop. I ran a Rasa loop with my 2600k, but if I tried 1.385v on this D14, I would be at around 100c lol.
Are you using Liquid Pro?

Yup - Liquid pro inside and outside smile.gif
Frozen Kaveri
(11 items)
 
 
CPUMotherboardGraphicsRAM
A10-7850K Gigabyte F2A88X-UP4 XFX R7 250 G.SKILL TridentX 2400Mhz CL9 
Hard DriveHard DriveHard DriveCooling
Samsung EVO 120GB Samsung EVO 120GB Crucial M500 240GB Little Devil Phasechange 
OSPowerCase
Windows 8.1 Corsair AX860i Lian Li PC-A51 
CPUMotherboardGraphicsRAM
4770K  ROG Maximus VI Impact HD 7990 Corsair Platinum 2666Mhz 
Hard DriveCoolingCoolingCooling
Samsung 830 SSD 3 x Alphacool NexXxoS UT60 240 EK Supremacy Precise Mount Add-On Naked Ivy CPU... EK Supremacy - Clean full nickel 
CoolingCoolingOSPower
Alphacool Heatmaster II Gentle Typhoon 1850RPM Windows 7 X64 Silverstone Strider Evolution 750W 
Case
Caselabs S3 w. pedestal 
  hide details  
Reply
Frozen Kaveri
(11 items)
 
 
CPUMotherboardGraphicsRAM
A10-7850K Gigabyte F2A88X-UP4 XFX R7 250 G.SKILL TridentX 2400Mhz CL9 
Hard DriveHard DriveHard DriveCooling
Samsung EVO 120GB Samsung EVO 120GB Crucial M500 240GB Little Devil Phasechange 
OSPowerCase
Windows 8.1 Corsair AX860i Lian Li PC-A51 
CPUMotherboardGraphicsRAM
4770K  ROG Maximus VI Impact HD 7990 Corsair Platinum 2666Mhz 
Hard DriveCoolingCoolingCooling
Samsung 830 SSD 3 x Alphacool NexXxoS UT60 240 EK Supremacy Precise Mount Add-On Naked Ivy CPU... EK Supremacy - Clean full nickel 
CoolingCoolingOSPower
Alphacool Heatmaster II Gentle Typhoon 1850RPM Windows 7 X64 Silverstone Strider Evolution 750W 
Case
Caselabs S3 w. pedestal 
  hide details  
Reply
post #4779 of 33675
Quote:
Originally Posted by Gomi View Post

Yup - Liquid pro inside and outside smile.gif

Liquid Pro on the outside doesn't weld the IHS to your block/heatsink?
post #4780 of 33675
Weld is a pretty strong way to describe it - But yes, it adheres .

Worst case scenario, you have to twist the heatsink off with abit of force to seperate the heatsink from the IHS.

The Liquid Pro CAN be a pain to get off though - For some its worth it, for others it is not. Go with what you feel - Using CLP *WILL* give you a temp drop.
Frozen Kaveri
(11 items)
 
 
CPUMotherboardGraphicsRAM
A10-7850K Gigabyte F2A88X-UP4 XFX R7 250 G.SKILL TridentX 2400Mhz CL9 
Hard DriveHard DriveHard DriveCooling
Samsung EVO 120GB Samsung EVO 120GB Crucial M500 240GB Little Devil Phasechange 
OSPowerCase
Windows 8.1 Corsair AX860i Lian Li PC-A51 
CPUMotherboardGraphicsRAM
4770K  ROG Maximus VI Impact HD 7990 Corsair Platinum 2666Mhz 
Hard DriveCoolingCoolingCooling
Samsung 830 SSD 3 x Alphacool NexXxoS UT60 240 EK Supremacy Precise Mount Add-On Naked Ivy CPU... EK Supremacy - Clean full nickel 
CoolingCoolingOSPower
Alphacool Heatmaster II Gentle Typhoon 1850RPM Windows 7 X64 Silverstone Strider Evolution 750W 
Case
Caselabs S3 w. pedestal 
  hide details  
Reply
Frozen Kaveri
(11 items)
 
 
CPUMotherboardGraphicsRAM
A10-7850K Gigabyte F2A88X-UP4 XFX R7 250 G.SKILL TridentX 2400Mhz CL9 
Hard DriveHard DriveHard DriveCooling
Samsung EVO 120GB Samsung EVO 120GB Crucial M500 240GB Little Devil Phasechange 
OSPowerCase
Windows 8.1 Corsair AX860i Lian Li PC-A51 
CPUMotherboardGraphicsRAM
4770K  ROG Maximus VI Impact HD 7990 Corsair Platinum 2666Mhz 
Hard DriveCoolingCoolingCooling
Samsung 830 SSD 3 x Alphacool NexXxoS UT60 240 EK Supremacy Precise Mount Add-On Naked Ivy CPU... EK Supremacy - Clean full nickel 
CoolingCoolingOSPower
Alphacool Heatmaster II Gentle Typhoon 1850RPM Windows 7 X64 Silverstone Strider Evolution 750W 
Case
Caselabs S3 w. pedestal 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide