Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 494

post #4931 of 33576
Quote:
Originally Posted by chris-br View Post

I really don't care about Ocing memory... The XMP setup is good enough for me.

Don't always trust the XMP settings though. Ivy seems pretty good with XMP but not all chips/boards are, x58 & x79 XMP setting with some mem kits can put voltages in the danger zone, where cpu is almost certain to degrade.

Much battle about safe voltages. Overclocking isn't safe, if you want fully safe run stock. Chip HAS to last 10 years, don't overclock it very much. Don't care if it lasts a week, have fun & shoot for the moon.
Safe is what is safe for the user. 1.55V is safe for hokies, 1.2V is safe for someone else.
This isn't really the place for safe though, it's a club where people tear up the cpus...
    
CPUMotherboardGraphicsRAM
i7 990x/3930k/3770k/4770k GB x58a-OC/Asus RIVE/x79 gd65/z77 mpower/z77 MV... gtx480s/gtx580s/7970s/680s/Titan Hyper/PSC/BBSE/Hynix/Samsung 
Hard DriveOptical DriveCoolingOS
HDDs/SSDs DVD Air/water/phase/copper pot Windowz 
MonitorKeyboardPowerCase
samsung 2320 Razer Lycosa ax1200 carboard box 
Mouse
Trackball 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 990x/3930k/3770k/4770k GB x58a-OC/Asus RIVE/x79 gd65/z77 mpower/z77 MV... gtx480s/gtx580s/7970s/680s/Titan Hyper/PSC/BBSE/Hynix/Samsung 
Hard DriveOptical DriveCoolingOS
HDDs/SSDs DVD Air/water/phase/copper pot Windowz 
MonitorKeyboardPowerCase
samsung 2320 Razer Lycosa ax1200 carboard box 
Mouse
Trackball 
  hide details  
Reply
post #4932 of 33576
The XMP profile is exacly the specs of my ram. I did check. smile.gif
post #4933 of 33576
Lol FtW xD spot on!
If you want it safe run stock, I'll go a bit further and say this IS ocn after all...but I do believe there's merit in the cientific method, but no one has a definite answer cause every chp's different, cause the manufacturing process is not 100% accurate.
post #4934 of 33576
Cooling makes a good difference also, custom water could run a higher vcore as safely as a stock cooled rig with lower vcore. Higher vcore with low temps, less risk. Low vcore with higher temps, less risk. High vcore with high temps, risk.
I spent about $1000 on coolers that make it safer to run high vcore daily, & then have really extreme cooling for when I want to do short bursts at 2V.
    
CPUMotherboardGraphicsRAM
i7 990x/3930k/3770k/4770k GB x58a-OC/Asus RIVE/x79 gd65/z77 mpower/z77 MV... gtx480s/gtx580s/7970s/680s/Titan Hyper/PSC/BBSE/Hynix/Samsung 
Hard DriveOptical DriveCoolingOS
HDDs/SSDs DVD Air/water/phase/copper pot Windowz 
MonitorKeyboardPowerCase
samsung 2320 Razer Lycosa ax1200 carboard box 
Mouse
Trackball 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 990x/3930k/3770k/4770k GB x58a-OC/Asus RIVE/x79 gd65/z77 mpower/z77 MV... gtx480s/gtx580s/7970s/680s/Titan Hyper/PSC/BBSE/Hynix/Samsung 
Hard DriveOptical DriveCoolingOS
HDDs/SSDs DVD Air/water/phase/copper pot Windowz 
MonitorKeyboardPowerCase
samsung 2320 Razer Lycosa ax1200 carboard box 
Mouse
Trackball 
  hide details  
Reply
post #4935 of 33576
Quote:
Originally Posted by FtW 420 View Post

Don't always trust the XMP settings though. Ivy seems pretty good with XMP but not all chips/boards are, x58 & x79 XMP setting with some mem kits can put voltages in the danger zone, where cpu is almost certain to degrade.
Much battle about safe voltages. Overclocking isn't safe, if you want fully safe run stock. Chip HAS to last 10 years, don't overclock it very much. Don't care if it lasts a week, have fun & shoot for the moon.
Safe is what is safe for the user. 1.55V is safe for hokies, 1.2V is safe for someone else.
This isn't really the place for safe though, it's a club where people tear up the cpus...
This is going to sound kinda pathetic but for me my safe zone for AMD is 0.1V
and for intel its 0.2V from stock.
post #4936 of 33576
Quote:
Originally Posted by Gomi View Post

Oh no doubt mate - Just always a good laugh to see how far you can push things.
I was told this in the UD7 thread (A very empty thread btw! frown.gif ) :
So guess I will have another good reading on how far BCLK can be pushed (105ish?).

UD7 is expensive and really only worth it for extreme overclocking.. cause u can get the same results out of a 150$ MB if your not doing the extreme stuff.

So thats why not many people have them.
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
post #4937 of 33576
Quote:
Originally Posted by FtW 420 View Post

Don't always trust the XMP settings though. Ivy seems pretty good with XMP but not all chips/boards are, x58 & x79 XMP setting with some mem kits can put voltages in the danger zone, where cpu is almost certain to degrade.
Much battle about safe voltages. Overclocking isn't safe, if you want fully safe run stock. Chip HAS to last 10 years, don't overclock it very much. Don't care if it lasts a week, have fun & shoot for the moon.
Safe is what is safe for the user. 1.55V is safe for hokies, 1.2V is safe for someone else.
This isn't really the place for safe though, it's a club where people tear up the cpus...

Yep if u want safe do not delid your cpu and run 4.2ghz..

If your gonna de lid your cpu why run 4.5ghz? if your gonna go thru all that to lower temps to show your an enthusiast then push it to it's limits are stay home..
I did not De lid my cpu to stay at the same mhz i was before but be 50 c below TJ Max i did it to overclock more... to me that is what it is all about.

I remember X58 everybody pushed things to there limits.. where did all those guys go?
If This was 2 years ago there would be 50 ppl running my Voltage 24/7 heh they all on ExtremeSystems now?
Edited by Hokies83 - 12/9/12 at 5:25pm
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
post #4938 of 33576
Quote:
Originally Posted by Hokies83 View Post

Yep if u want safe do not delid your cpu and run 4.2ghz..
If your gonna de lid your cpu why run 4.5ghz? if your gonna go thru all that to lower temps to show your an enthusiast then push it to it's limits are stay home..
I did not De lid my cpu to stay at the same mhz i was before but be 50 c below TJ Max i did it to overclock more... to me that is what it is all about.
I remember X58 everybody pushed things to there limits.. where did all those guys go?
If This was 2 years ago there would be 50 ppl running my Voltage 24/7 heh they all on ExtremeSystems now?

Seriously, why would anyone even be in this thread if they were just going to play it safe? There are plenty of other "clubs" out there for you biggrin.gif.
post #4939 of 33576
Quote:
Originally Posted by PuffinMyLye View Post

Seriously, why would anyone even be in this thread if they were just going to play it safe? There are plenty of other "clubs" out there for you biggrin.gif.

You would be shocked.. how many delidded dropped 25 c and run the exact same OC they did before the de lid...
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
post #4940 of 33576
Quote:
Originally Posted by Socks keep you warm View Post

This is going to sound kinda pathetic but for me my safe zone for AMD is 0.1V
and for intel its 0.2V from stock.

Only sounds pathetic if you're wealthy & buy a new rig 4 times a year (or are trying to break world records biggrin.gif ). If it's your only rig & you can't replace it for a long time if it breaks, better safe than sorry.
Quote:
Originally Posted by Hokies83 View Post

UD7 is expensive and really only worth it for extreme overclocking.. cause u can get the same results out of a 150$ MB if your not doing the extreme stuff.
So thats why not many people have them.

Yes, for average 24/7 overclocks pretty much any z77 board can do that. Spending more is just for looks, options & features. Many $150 boards can still do extreme stuff, may be more difficult or not go quite as far but they can be pretty capable.
    
CPUMotherboardGraphicsRAM
i7 990x/3930k/3770k/4770k GB x58a-OC/Asus RIVE/x79 gd65/z77 mpower/z77 MV... gtx480s/gtx580s/7970s/680s/Titan Hyper/PSC/BBSE/Hynix/Samsung 
Hard DriveOptical DriveCoolingOS
HDDs/SSDs DVD Air/water/phase/copper pot Windowz 
MonitorKeyboardPowerCase
samsung 2320 Razer Lycosa ax1200 carboard box 
Mouse
Trackball 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 990x/3930k/3770k/4770k GB x58a-OC/Asus RIVE/x79 gd65/z77 mpower/z77 MV... gtx480s/gtx580s/7970s/680s/Titan Hyper/PSC/BBSE/Hynix/Samsung 
Hard DriveOptical DriveCoolingOS
HDDs/SSDs DVD Air/water/phase/copper pot Windowz 
MonitorKeyboardPowerCase
samsung 2320 Razer Lycosa ax1200 carboard box 
Mouse
Trackball 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide