Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 546

post #5451 of 33549
Guy on Hard forum selling 3770ks for 250$ each.
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
post #5452 of 33549
Quote:
Originally Posted by feniks View Post

I don't know what ram you use. I use automatic 0.9v vccsa (and 1.05v vccio) for up to 2200MHz RAM when using 2x4GB config (it should be higher for running 4 sticks), above that I switch to 1.15V & 1.20V or higher just to rule out mem controller instability issues - actually m working on making my sticks run 2600MHz with CL11 biggrin.gif

i use 0.925vccsa for 2400mhz ram at 4.8ghz stable. if itry to go to 5 ghz with out upping the vccsa it wont be stable. so i put my vccsa up to 1.107v and ive been stable for a few day now ran cinebench prime 95 2 hours. plan to make another 12 hr run @ 5ghz this time for the ivy stable club after i delid thumb.gif
Daily Rig
(21 items)
 
Bench Setup
(19 items)
 
 
CPUMotherboardGraphicsRAM
5820k 4.7Ghz @ 1.28vcore / 1.88vccin Gigabyte x99 SOC Champion EVGA GTX 1080Ti G.SKILL Trident Z 32GB 3200Mhz CL14 
Hard DriveHard DriveHard DriveHard Drive
2x Intel 520 120Gb SSD in RAID 0  Intel 180Gb 530 SSD OS Drive 2Tb WD HDD  2x Intel 730 SSD 480GB in RAID 0 
CoolingCoolingCoolingCooling
2x HWLabs GTX360 Black Ice in Push Pull EK blocks for CPU / GPU's 6x corsair sp120 2350RPM 6x Ek Vardar 120 F4's 2200rpm  
OSMonitorKeyboardPower
windows 10 XB270HU 2560x1440 - 144Hz - G-sync Razor blackwidow cooler master V1000 
CaseMouseMouse PadAudio
Corsair 780T EVGA TORQ x10 evga mouse pad 2.1 audio / Hyper X cloud II / Sennheiser Gam... 
Other
EK pump / res 
CPUMotherboardGraphicsGraphics
6600k Z170M OC Formula GTX780Ti AMD HD6450 
RAMHard DriveHard DriveHard Drive
Trident Z 3600Mhz cl16 2x8GB 120Gb intel 520 120Gb intel 520 64Gb adata ssd  
Hard DriveOptical DriveCoolingCooling
750Gb WD Black Sony  F1 Gemini CPU Pot Tek - 9 Fat 
CoolingOSMonitorPower
custom loop two 240rad's xp,W7,W8,W10 x-star 2560x1440  Rosewill Quark-650 Platinum / Antec HCP-850 Pla... 
CaseMouseMouse Pad
Dimastech Mini V1.0 black razor abyssus Razor 
  hide details  
Reply
Daily Rig
(21 items)
 
Bench Setup
(19 items)
 
 
CPUMotherboardGraphicsRAM
5820k 4.7Ghz @ 1.28vcore / 1.88vccin Gigabyte x99 SOC Champion EVGA GTX 1080Ti G.SKILL Trident Z 32GB 3200Mhz CL14 
Hard DriveHard DriveHard DriveHard Drive
2x Intel 520 120Gb SSD in RAID 0  Intel 180Gb 530 SSD OS Drive 2Tb WD HDD  2x Intel 730 SSD 480GB in RAID 0 
CoolingCoolingCoolingCooling
2x HWLabs GTX360 Black Ice in Push Pull EK blocks for CPU / GPU's 6x corsair sp120 2350RPM 6x Ek Vardar 120 F4's 2200rpm  
OSMonitorKeyboardPower
windows 10 XB270HU 2560x1440 - 144Hz - G-sync Razor blackwidow cooler master V1000 
CaseMouseMouse PadAudio
Corsair 780T EVGA TORQ x10 evga mouse pad 2.1 audio / Hyper X cloud II / Sennheiser Gam... 
Other
EK pump / res 
CPUMotherboardGraphicsGraphics
6600k Z170M OC Formula GTX780Ti AMD HD6450 
RAMHard DriveHard DriveHard Drive
Trident Z 3600Mhz cl16 2x8GB 120Gb intel 520 120Gb intel 520 64Gb adata ssd  
Hard DriveOptical DriveCoolingCooling
750Gb WD Black Sony  F1 Gemini CPU Pot Tek - 9 Fat 
CoolingOSMonitorPower
custom loop two 240rad's xp,W7,W8,W10 x-star 2560x1440  Rosewill Quark-650 Platinum / Antec HCP-850 Pla... 
CaseMouseMouse Pad
Dimastech Mini V1.0 black razor abyssus Razor 
  hide details  
Reply
post #5453 of 33549
Quote:
Originally Posted by Hokies83 View Post

LoL that case is 850$ lol.
It can do like 8 480 rads and 4 PSus and hold 2 systems at once and crap lol.

Just get my TH10, It can hold 7 480 rads at any thickness without and mods, if you dont use a disc drive 8 480 rads, with an optional top 2 more, with a bottom 4 more, no case holds 14 480 any thickness rads with no mod and all internal LOL. Except something like the tx10 which is bigger than your dishwasher, mine comes close, and is really light...Also holds ant size mobo and 2 psus and all the room for ssds disc drives and water cooling stuff.

Plus a giant window, if you dont want that max 16 480rads... go to my profile to see it.
Edited by Arm3nian - 12/14/12 at 1:48pm
Sold
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-4930k @4.7 Asus Rampage IV Black Edition EVGA GTX 780 Ti @1300/8250 1.21v G.Skill Trident X 4x4GB 2400MHz 9-11-11-31-1 
Hard DriveHard DriveCoolingCooling
Samsung 840 Pro 256GB  Western Digital Red 2TB EK Supremacy CPU Waterblock Acetal+Nickel  EK 780 Ti Waterblock Acetal+Nickel 
CoolingCoolingCoolingCooling
Primochill Advanced LRT White Tubing (2) Hardware Labs Black Ice SR-1 480 Radiator Bitspower Fittings (8) Corsair SP120 Quiet Edition Fans 
CoolingCoolingOSMonitor
EK Laing D5 Pump w/ Acetal Top  EK 250mm Reservoir  Windows 7 x64 ROG SWIFT 
KeyboardPowerCaseMouse
Das Ultimate S Blank Cherry MX Blue  EVGA G2 1300 Case Labs Magnum TH10 Razer Deathadder 2013 
Mouse PadAudio
Razer Goliathus Control Sennheiser HD650  
  hide details  
Reply
Sold
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-4930k @4.7 Asus Rampage IV Black Edition EVGA GTX 780 Ti @1300/8250 1.21v G.Skill Trident X 4x4GB 2400MHz 9-11-11-31-1 
Hard DriveHard DriveCoolingCooling
Samsung 840 Pro 256GB  Western Digital Red 2TB EK Supremacy CPU Waterblock Acetal+Nickel  EK 780 Ti Waterblock Acetal+Nickel 
CoolingCoolingCoolingCooling
Primochill Advanced LRT White Tubing (2) Hardware Labs Black Ice SR-1 480 Radiator Bitspower Fittings (8) Corsair SP120 Quiet Edition Fans 
CoolingCoolingOSMonitor
EK Laing D5 Pump w/ Acetal Top  EK 250mm Reservoir  Windows 7 x64 ROG SWIFT 
KeyboardPowerCaseMouse
Das Ultimate S Blank Cherry MX Blue  EVGA G2 1300 Case Labs Magnum TH10 Razer Deathadder 2013 
Mouse PadAudio
Razer Goliathus Control Sennheiser HD650  
  hide details  
Reply
post #5454 of 33549
Quote:
Originally Posted by Hokies83 View Post

Guy on Hard forum selling 3770ks for 250$ each.

microcenter is still 229.00
post #5455 of 33549
Quote:
Originally Posted by kgtuning View Post

microcenter is still 229.00

For the 75% of americans with NO mc with in an Hours drive thumb.gif
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
post #5456 of 33549
Quote:
Originally Posted by Hokies83 View Post

For the 75% of americans with NO mc with in an Hours drive thumb.gif

good point
post #5457 of 33549
Quote:
Originally Posted by lilchronic View Post

i use 0.925vccsa for 2400mhz ram at 4.8ghz stable. if itry to go to 5 ghz with out upping the vccsa it wont be stable. so i put my vccsa up to 1.107v and ive been stable for a few day now ran cinebench prime 95 2 hours. plan to make another 12 hr run @ 5ghz this time for the ivy stable club after i delid thumb.gif
I'm currently running 4 sticks of 1866Mhz G.Skill with 9-10-9-28 1t timings. If I purchase 2 x 8GB sticks of 2400-2600Mhz RAM, do you folks think I would be able to lower the voltage my 3770K needs @ 4.8Ghz? I just finished a 13 hour prime 27.7 run @ 4.8Ghz 1.32v. Thoughts?
Gaming PC
(17 items)
 
  
CPUMotherboardGraphicsRAM
AMD RYZEN R7 1800X @4.1Ghz GA-AX370-Gaming K7 EVGA GTX 1080 Ti SC Black Edition G.SKILL TridentZ RGB Series 16GB (2 x 8GB) 3200... 
Hard DriveHard DriveHard DriveCooling
Samsung 840 Pro 256GB SSD Samsung 850 Pro 512GB SSD Samsung 850 EVO 1TB SSD Corsair H100i 
OSMonitorKeyboardPower
Microsoft Windows 10 Pro 64-bit Samsung 49KS8000 Corsair K70 RGB Corsair AX1200i 
CaseMouseMouse PadAudio
Cooler Master Mastercase Maker 5  Corsair M65 RGB Custom SF 49ERS mouse pad Philips X1 headphones with V-MODA BoomPro mic 
Audio
Sound BlasterX Katana 
  hide details  
Reply
Gaming PC
(17 items)
 
  
CPUMotherboardGraphicsRAM
AMD RYZEN R7 1800X @4.1Ghz GA-AX370-Gaming K7 EVGA GTX 1080 Ti SC Black Edition G.SKILL TridentZ RGB Series 16GB (2 x 8GB) 3200... 
Hard DriveHard DriveHard DriveCooling
Samsung 840 Pro 256GB SSD Samsung 850 Pro 512GB SSD Samsung 850 EVO 1TB SSD Corsair H100i 
OSMonitorKeyboardPower
Microsoft Windows 10 Pro 64-bit Samsung 49KS8000 Corsair K70 RGB Corsair AX1200i 
CaseMouseMouse PadAudio
Cooler Master Mastercase Maker 5  Corsair M65 RGB Custom SF 49ERS mouse pad Philips X1 headphones with V-MODA BoomPro mic 
Audio
Sound BlasterX Katana 
  hide details  
Reply
post #5458 of 33549
Thread Starter 
Quote:
Originally Posted by ivanlabrie View Post

You can have more success doing 3do benchies cause CPU benches will be dominated by know2 users and our delidded chips would be a good thing to have...for good 3do scores you need a stronger CPU with whatever card you choose to be competitive

Run aquamark. That will show your cpu performance with video card as well. Or do pcmark 06 or something.
Quote:
Originally Posted by Hokies83 View Post

If what he said is true i would not even bother if everything u do runs fine do not even worry about it lol.

Exactly. If it runs what you want it to. Then good enough.
Quote:
Originally Posted by Hokies83 View Post

Switch 810 is a baby lol Even the Cosmos 2 makes it look tiny.

I love my cosmos 2. I really want to do a super build this summer in mine. Get some crazy water cooling going in this thing. Dual 60mm 240s in the bottom and a giant 80 mm in the top inlaid into the ceiling and spot welded nice and good in there, the put a 200 in the front for a intake as well then throw a dual super thick 120 or 140mm rad system on the exhaust and do a dual pump inlay system as well then have a nice frozenQ 250mm helix res with acid green uv tubes and my hosing will be uv green as well with uv lights everywhere making this thing look badass. All with my soon to be modded side panel with a window.

Lol you people and your 14 480 rads I can beat that any day. There's a case I saw a while back that I wanted to do a wc rig in and it could hold 43 480 80mm rads. Was amazing. Also if you really want a good wc rig. Then just get a 360x360 rad and do a mineral oil rig. It cools so freaking well and is perfect for gpus.

Or just get a table and put over 80 480s on it. Hokies if you want a few rads that pump wont do ot and if your getting a big case then get a mcp655 pump and get some real performance on it instead of the cpu based pump. But that's just me.
post #5459 of 33549
Quote:
Originally Posted by Valgaur View Post

Run aquamark. That will show your cpu performance with video card as well. Or do pcmark 06 or something.
Exactly. If it runs what you want it to. Then good enough.
I love my cosmos 2. I really want to do a super build this summer in mine. Get some crazy water cooling going in this thing. Dual 60mm 240s in the bottom and a giant 80 mm in the top inlaid into the ceiling and spot welded nice and good in there, the put a 200 in the front for a intake as well then throw a dual super thick 120 or 140mm rad system on the exhaust and do a dual pump inlay system as well then have a nice frozenQ 250mm helix res with acid green uv tubes and my hosing will be uv green as well with uv lights everywhere making this thing look badass. All with my soon to be modded side panel with a window.
Lol you people and your 14 480 rads I can beat that any day. There's a case I saw a while back that I wanted to do a wc rig in and it could hold 43 480 80mm rads. Was amazing. Also if you really want a good wc rig. Then just get a 360x360 rad and do a mineral oil rig. It cools so freaking well and is perfect for gpus.
Or just get a table and put over 80 480s on it. Hokies if you want a few rads that pump wont do ot and if your getting a big case then get a mcp655 pump and get some real performance on it instead of the cpu based pump. But that's just me.

The pump in the Drive II is a monster bro.. it can hold up 2 80mm 480 rads no probs.

Motor type Electronically commutated, brushless DC, spherical motor
Nominal voltage 12 V DC
Operating voltage range 9 to 13.4 VDC
Max. nominal power (@12 V) 18 W
Max. nominal current (@12 V) 1.5 A
Max. nominal head (@12 V) 14.7 ft (4.4m)
Max nominal discharge (@12 V) ~ 4.75 GPM (17.5 LPM)
Maximum pressure 22 PSI (1.5 BAR)
Temperature range Up to 140 °F (60 °C)
Electrical power connector Molex 4 pin
PWM + RPM Signals 4-pin connector
Speed adjustment range 1300 to 4500 rpm

Can pump almost 5 gallons a min lmao.

Still have not heard back from gomi...

Most likely ill get that a the 240 rad with built in res and get the MOnsta 240 80mm and call it a day.. use my 15 dba fans and run pump on Low..

It is enough for a cpu and 2 gpus easy.. im just going to cool the cpu with ot however.. i do not like having to deal with the cpu water blocks every gen.. When i can just lapp non Ref cards put Liquid ultra on them and drop temps 15 c heh.
Edited by Hokies83 - 12/14/12 at 2:30pm
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
post #5460 of 33549
Thread Starter 
Quote:
Originally Posted by Hokies83 View Post

The pump in the Drive II is a monster bro.. it can hold up 2 80mm 480 rads no probs.
Motor type Electronically commutated, brushless DC, spherical motor
Nominal voltage 12 V DC
Operating voltage range 9 to 13.4 VDC
Max. nominal power (@12 V) 18 W
Max. nominal current (@12 V) 1.5 A
Max. nominal head (@12 V) 14.7 ft (4.4m)
Max nominal discharge (@12 V) ~ 4.75 GPM (17.5 LPM)
Maximum pressure 22 PSI (1.5 BAR)
Temperature range Up to 140 °F (60 °C)
Electrical power connector Molex 4 pin
PWM + RPM Signals 4-pin connector
Speed adjustment range 1300 to 4500 rpm
Can pump almost 5 gallons a min lmao.
Still have not heard back from gomi...
Most likely ill get that a the 240 rad with built in res and get the MOnsta 240 80mm and call it a day.. use my 15 dba fans and run pump on Low..
It is enough for a cpu and 2 gpus easy.. im just going to cool the cpu with ot however.. i do not like having to deal with the cpu water blocks every gen.. When i can just lapp non Ref cards put Liquid ultra on them and drop temps 15 c heh.

Okay just makin sure. Don't want to see 400 bucks not pumping right lol. Yeah 5 gpm is good. The mcp655 I want is around 8 or 13 I THINK complete balpark guess here on my end if im wrong welp I haven't looked at wc stuff for around 4 months.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide