Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 68

post #671 of 33399
I wouldn't do the more than 1.55v oc's more than once, and only for a cpu-z validation...We're treading on some dangerous terrain here, temps at those volts start degrading the chips right away, most 5.5ghz oc's are done on dice, and 1.75v for DICE is considered MURDER!
post #672 of 33399
before removal IHS:

4.5ghz


max temp 87 c!






after IHS removal:

4.5ghz

max temp 67 c!!!

it is 20 c lower!!!!






and LINX completed at 4.9 Ghz !!!!



post #673 of 33399
Im running 5.1ghz prime 95 7 hr stable @ 1.54 v core that is my new 24/7 OC.

Gives me the go juice to set back and wait for my guy to have a Haswell hardware ready for me so i gets it cheapppp
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
post #674 of 33399
Man that's insane vcore for 24/7 and ambient temps!
I'd back down to 5ghz or 4.9...have you tested volts for those clocks?
post #675 of 33399
Quote:
Originally Posted by ivanlabrie View Post

Man that's insane vcore for 24/7 and ambient temps!
I'd back down to 5ghz or 4.9...have you tested volts for those clocks?

Temps? i barely break 80c? lol.
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
post #676 of 33399
Thread Starter 
Quote:
Originally Posted by ivanlabrie View Post

I wouldn't do the more than 1.55v oc's more than once, and only for a cpu-z validation...We're treading on some dangerous terrain here, temps at those volts start degrading the chips right away, most 5.5ghz oc's are done on dice, and 1.75v for DICE is considered MURDER!
I don't mean to be a broken record or anything but IB is much more resiliant to degredation than SB is im honestly very surprised my little Franky has started getting old lol. Also for my suicide runs I did them just long enough to either bsod for unstable or to get that cpuz run I don't push it super horrible hard I get a few tests in then cpuz that thing fast longest time was maybe 4 mins before at 1.752. Although I might have the Prodigy chip the Ln2 guys are telling me and that its just one of those lucky chips with crazy resistances.
post #677 of 33399
Quote:
Originally Posted by Valgaur View Post

I don't mean to be a broken record or anything but IB is much more resiliant to degredation than SB is im honestly very surprised my little Franky has started getting old lol. Also for my suicide runs I did them just long enough to either bsod for unstable or to get that cpuz run I don't push it super horrible hard I get a few tests in then cpuz that thing fast longest time was maybe 4 mins before at 1.752. Although I might have the Prodigy chip the Ln2 guys are telling me and that its just one of those lucky chips with crazy resistances.

Hehehe, yeah, seems like your chip is quite sturdy. I can't afford another chip so I won't go that far on regular cooling, with dice perhaps...
Quote:
Originally Posted by Hokies83 View Post

Temps? i barely break 80c? lol.

Over ambient temps...no sub zero stuff. I wouldn't risk it, despite the lower temps, you're still pumping some decent watts out of your chip (though faster and more efficiently).
post #678 of 33399
Thread Starter 
Quote:
Originally Posted by ivanlabrie View Post

Hehehe, yeah, seems like your chip is quite sturdy. I can't afford another chip so I won't go that far on regular cooling, with dice perhaps...
Over ambient temps...no sub zero stuff. I wouldn't risk it, despite the lower temps, you're still pumping some decent watts out of your chip (though faster and more efficiently).

Yeah little Franky is a tough guy lol. And Hokies yeah Id hold off on a 5.1 stable yeah the temps are good but even I wouldn't do 1.55vcore for everyday those 300 mhz wont make a huge difference and if they do then what you doing lol. tongue.gif
post #679 of 33399
BTC with his cpu? lol
I'd keep the stable 5.1 and so on clocks for benching 3d and 2d stuff...24/7 there's no real point in running more than 4.2ghz really. Even I know that, and I'm insane and overclock anything I touch lol
post #680 of 33399
Thread Starter 
Hmmm.... to push for 5.5 or 5.6..........or test my stability and make sure Franky is okay.......
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide