Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 829

post #8281 of 33641
Max 1.55v core.. 1.45v is Avg V core for a 24/7 but hardly the Max...
Edited by Hokies83 - 1/14/13 at 8:54am
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
post #8282 of 33641
Just tested mine it needs 1.47v for 5GHz (15min on Prime with 1792k FFT) i rather stay at 4.7 with 1.28v...
post #8283 of 33641
Quote:
Originally Posted by Swag View Post

Yea, once you have some money for tubing, just get some clear ones and get a colored coolant. If you want to use distilled, then get white tubing. IMHO, I prefer the clear tubing + red coolant. The coolants nowadays have no problems and don't normally cause problems!
We were just having a conversation in the spreadsheet. tongue.gif Just do as much as you can, doesn't really matter if you wait a bit. People got to learn to be patient!

Quote:
Originally Posted by Valgaur View Post

I really do think the iGpu would pull a bit moar volts lulz. but seriously it does make sense since it's putting more stress on the chip itself.
Nope you are good.
I know I'm so excited for that bad boy! biggrin.gif
That works lol.
Thank goodness!
Your In!! Now Slap that badarse Sig on that sig line! wheee.gif
almost entered it twice right Swag.... lol

Quote:
Originally Posted by Swag View Post

We were having a conversation in the spreadsheet. tongue.gif
Quote:
Originally Posted by Valgaur View Post

I really do think the iGpu would pull a bit moar volts lulz. but seriously it does make sense since it's putting more stress on the chip itself.
Nope you are good.
I know I'm so excited for that bad boy! biggrin.gif
That works lol.
Thank goodness!
Your In!! Now Slap that badarse Sig on that sig line! wheee.gif
almost entered it twice right Swag.... lol

this was the old setup

so i got around getting the tubing done here is a sneak peek of the project thus far got some new sleeving and attached my old block to the video card for a cpu video watercooling setup
new tubing

i was 5.2ghz stable with my old setup with old hose and old water.


the highest temps at 5.2ghz doesnt go over 81 for 100 run ibt but ill do some more testing with the new setup and compare. it is 72 degrees outside today
Edited by ByeByeFive - 1/14/13 at 9:15am
post #8284 of 33641
Quote:
Originally Posted by Kolt21 View Post

DAMN YOU VON DUTCH!.
You said that.. and now all the little voices are telling me to push my 4.7 as high as 1.45v can take it after delid.

i showed you the graph from sin0822's guide,
where he says, "recommended range on air/water 1.3-1.45V vcore"
besides all the other observations here, and elsewhere,
he knows what hes talking about really, so im also using his work to help others,
hes highly respected all around, most peeps who talk about the "maximum vcore Intel states is 1.52V" here and there for example,
are using his graph as reference, they dont know, they just repeat what theve read, or heard..

i did the same thing, but then a few peeps started to comment me on using the 1.52V intel states,
saying, intel doesnt state that anywhere, youre talking bs, proof it bla bla,
so i looked into this, and for weeks i looked for answers, others here know i did,
only to find out, that its true, intel doesnt give hard numbers about max vcore for ivy,
i can even show you a email i got from them, after contacting them through chat, forum etc..

Dear Fred,
Thank you for contacting Intel® Technical Support.
I cannot assist you overclocking your processor. You are free to overclock it, but we cannot give you any particular voltages. Please visit this web site http://www.intel.com/content/www/us/en/gaming/overclocking/overclocking-intel-processors.html where you find some guidance overclocking your processor.
Please replay back this email; do not send a new one.

they cant, because they dont have any max vcore stated anywhere..

so..its upto us, and peeps who really have knowledge to determine what the max ivy's can run smile.gif
have you already heard of any kind of degradation on ivy's? i havent so far,
and we push our chips hard sometimes, i went all the way upto 1.85V vcore for benching,
only 1 chip died here so far, Val our captain, pushing it all the way upto 1.9V, on air/water, longer periods
Hokies runs his 1.55V 24/7 i think it was, no problem reported yet smile.gif
mine still runs very well..

Quote:
Originally Posted by Kolt21 View Post

I have an observation to report. thinking.gif

all of you guys saying 1.450 stop at 1.3 on your rig. thinking.gif Us > buttkick.gif < You

whistle.gifwhistle.gifwhistle.gifwhistle.gifwhistle.gif

yep,i can run 4.8ghz at 1.420V as max oc 24/7, its the super stable one in my sig,
4.9ghz needs 1.510-1.520V vcore, thats to much for me personally
i went from 4.5 to 4545, to 4645 to 4.7ghz, i settled there, not because im afraid to run the 4.8ghz tho smile.gif
i know it will run for years if i would, but dont feel the need now, 4.7ghz is a great oc over stock..
Edited by VonDutch - 1/14/13 at 9:35am
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
post #8285 of 33641
I made that post for a laugh is all. First smiley is all hey man whats up, should I go 1.45v. second smiley is all, yea look over there at this information you totally can. rofl then the smiley kicking the smiley is a representation of that smiley not doing what he is saying.

Entertainment purposes only. I totally get what you guys are saying.
post #8286 of 33641
Quote:
Quote:
Originally Posted by Valgaur View Post

I really do think the iGpu would pull a bit moar volts lulz. but seriously it does make sense since it's putting more stress on the chip itself.
Nope you are good.
I know I'm so excited for that bad boy! biggrin.gif
That works lol.
Thank goodness!
Your In!! Now Slap that badarse Sig on that sig line! wheee.gif
almost entered it twice right Swag.... lol

Quote:
Originally Posted by Swag View Post

We were having a conversation in the spreadsheet. tongue.gif
Quote:
Originally Posted by Valgaur View Post

I really do think the iGpu would pull a bit moar volts lulz. but seriously it does make sense since it's putting more stress on the chip itself.
Nope you are good.
I know I'm so excited for that bad boy! biggrin.gif
That works lol.
Thank goodness!
Your In!! Now Slap that badarse Sig on that sig line! wheee.gif
almost entered it twice right Swag.... lol


this was the old setup Images (Click to show)

so i got around getting the tubing done here is a sneak peek of the project thus far got some new sleeving and attached my old block to the video card for a cpu video watercooling setup
new tubing

i was 5.2ghz stable with my old setup with old hose and old water.
the highest temps at 5.2ghz doesnt go over 81 for 100 run ibt but ill do some more testing with the new setup and compare. it is 72 degrees outside today

As a member of the sleeving community, please tighten those cables! It'll look 10x better. tongue.gif But aside from tucking those cables a bit more, that looks great! thumb.gif I think you should take a full overview picture of it so we can see the entire thing. tongue.gif
Swag's Venus
(18 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k @ 4.8GHz Asus Maximus V Gene EVGA GTX 680 G.Skill RipJaws X 16GB (2x8GB) 
Hard DriveHard DriveCoolingOS
Samsung 830 Crucial M4 Corsair H100i Windows 7 
MonitorMonitorKeyboardPower
Dell U2713HM Crossover 27Q (3x) Ducky TKL OCN-Version Corsair AX650 
CaseMouseMouse PadAudio
Corsair C70 (Military Green) Razer DeathAdder BE Steelseries QCK+ Beats Pro 
AudioAudio
Bose Surround Sound 5.1 Beats Tours 
  hide details  
Reply
Swag's Venus
(18 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k @ 4.8GHz Asus Maximus V Gene EVGA GTX 680 G.Skill RipJaws X 16GB (2x8GB) 
Hard DriveHard DriveCoolingOS
Samsung 830 Crucial M4 Corsair H100i Windows 7 
MonitorMonitorKeyboardPower
Dell U2713HM Crossover 27Q (3x) Ducky TKL OCN-Version Corsair AX650 
CaseMouseMouse PadAudio
Corsair C70 (Military Green) Razer DeathAdder BE Steelseries QCK+ Beats Pro 
AudioAudio
Bose Surround Sound 5.1 Beats Tours 
  hide details  
Reply
post #8287 of 33641
You know, volts is worse than temps for cpu life and degradation. You've said mutiple times heat is the bigger problem but that isn't true. Hell, look at the graph you quote. You can clearly see turning that VID to 'mid' would cause the cpu to degrade sooooo much quicker then temps would, and that's assuming a similar exponential curve, which would more likely be steeper.

Didn't sin say 1.6vcore on ambient cooling ? There isnt isn'treally a max vcore for ivy because no one knows, they are hardy chips, and unlike sandy you dondon'thave many reports of degradation or killing the chip.
Build In Progress
(17 items)
 
   
CPUMotherboardGraphicsRAM
Haswell i7-4770K 4.8GHz@1.452v/1.97vRIN Gigabyte Z87X-UD3H Older Gigabyte 7950 (H60 Mod) 2x4GB Gskill 2400CL11 Hynix CFRs 
Hard DriveCoolingOSMonitor
Samsung 830 128gb Corsair H110 w/4x 140mm Yate Loon High Blues W7 x64 Ultimate Yarrgh Matey Dell U2312HM Matte IPS 1080p 
MonitorMonitorKeyboardPower
Sanyo DP19640 18.5" 768p KDS Rad-7xp 1024p CM Storm Quickfire Rapids Brown Rosewill Capstone 750 
CaseMouseMouse PadAudio
Bitfenix Shinobi Modded CM Storm Spawn Steelseries Diablo 3 2 set CD Speaker + Big Sub 
Other
Bitfenix Recon Fan Controller Moded 
CPUMotherboardGraphicsRAM
Delidded i7-3770K 5GHz@1.499 Gigabyte Z77X-UD5H 1.1 Sapphire Dual-X 7950 3L Boost 4x2GB Mushkin Ridgeback 2200mhz 8/11/8/27 1.75v... 
Hard DriveCoolingCoolingCooling
Intel X25-M 80GB SSD NH-D14 SE2011 Noctua 120/140/140 Fans 3 x Yate Loon Mediums (Petras) 2 x NZXT Havik 140mm Fans 
OSMonitorMonitorKeyboard
Hax'd W7 Ultimate 64-bit Sanyo DP19640 19'' KDS Radius Rad-7xp 17'' Ducky 1087 MX Brown 10keyless 
PowerCaseMouseMouse Pad
Rosewill Capstone 550w Modular NZXT Source 210 w/Modded Window Razer Deathadder 3.5G Steelseries Blizzcon D3 
AudioAudioOtherOther
Phillips FW-C250 2 Speaker Set w/3 CD Changer JBL Sub 6 Subwoofer NZXT Sleeved LED Strip 1m Blue NZXT Sentry 2 Fan Controller 
Other
Colonial Blue Paracord Sleeving 
CPUMotherboardGraphicsRAM
Phenom ii X4 955C2, $31, 5 broken pins, works! ... Biostar A770e3 6.3 Red&Black MSI GTX 460 768mb Twin Frozr II 2 x 2GB Kingston HyperX 1333 OC to 1348CL7@1.65v 
Hard DriveCoolingCoolingCooling
Intel X25-M G2 80GB SSD NH-D14 SE2011 6 x Case Fans (4 x YL-M, NZXT case fan, CM Hype... Jerryrigged Chipset-Northbridge 80mm HSF 
CoolingOSMonitorKeyboard
Jerryrigged VRM Heatsink (sawed off stock AM2 h... Hax'd W7 Ultimate 64bit Sanyo DP19640 19"1360x768 Ducky Cherry Browns 10keyless 
PowerCaseMouseMouse Pad
Antec Earthwatts 430D NZXT Gamma Steelseries Kinzu Optical Steelseries Blizzcon Diablo 3 
  hide details  
Reply
Build In Progress
(17 items)
 
   
CPUMotherboardGraphicsRAM
Haswell i7-4770K 4.8GHz@1.452v/1.97vRIN Gigabyte Z87X-UD3H Older Gigabyte 7950 (H60 Mod) 2x4GB Gskill 2400CL11 Hynix CFRs 
Hard DriveCoolingOSMonitor
Samsung 830 128gb Corsair H110 w/4x 140mm Yate Loon High Blues W7 x64 Ultimate Yarrgh Matey Dell U2312HM Matte IPS 1080p 
MonitorMonitorKeyboardPower
Sanyo DP19640 18.5" 768p KDS Rad-7xp 1024p CM Storm Quickfire Rapids Brown Rosewill Capstone 750 
CaseMouseMouse PadAudio
Bitfenix Shinobi Modded CM Storm Spawn Steelseries Diablo 3 2 set CD Speaker + Big Sub 
Other
Bitfenix Recon Fan Controller Moded 
CPUMotherboardGraphicsRAM
Delidded i7-3770K 5GHz@1.499 Gigabyte Z77X-UD5H 1.1 Sapphire Dual-X 7950 3L Boost 4x2GB Mushkin Ridgeback 2200mhz 8/11/8/27 1.75v... 
Hard DriveCoolingCoolingCooling
Intel X25-M 80GB SSD NH-D14 SE2011 Noctua 120/140/140 Fans 3 x Yate Loon Mediums (Petras) 2 x NZXT Havik 140mm Fans 
OSMonitorMonitorKeyboard
Hax'd W7 Ultimate 64-bit Sanyo DP19640 19'' KDS Radius Rad-7xp 17'' Ducky 1087 MX Brown 10keyless 
PowerCaseMouseMouse Pad
Rosewill Capstone 550w Modular NZXT Source 210 w/Modded Window Razer Deathadder 3.5G Steelseries Blizzcon D3 
AudioAudioOtherOther
Phillips FW-C250 2 Speaker Set w/3 CD Changer JBL Sub 6 Subwoofer NZXT Sleeved LED Strip 1m Blue NZXT Sentry 2 Fan Controller 
Other
Colonial Blue Paracord Sleeving 
CPUMotherboardGraphicsRAM
Phenom ii X4 955C2, $31, 5 broken pins, works! ... Biostar A770e3 6.3 Red&Black MSI GTX 460 768mb Twin Frozr II 2 x 2GB Kingston HyperX 1333 OC to 1348CL7@1.65v 
Hard DriveCoolingCoolingCooling
Intel X25-M G2 80GB SSD NH-D14 SE2011 6 x Case Fans (4 x YL-M, NZXT case fan, CM Hype... Jerryrigged Chipset-Northbridge 80mm HSF 
CoolingOSMonitorKeyboard
Jerryrigged VRM Heatsink (sawed off stock AM2 h... Hax'd W7 Ultimate 64bit Sanyo DP19640 19"1360x768 Ducky Cherry Browns 10keyless 
PowerCaseMouseMouse Pad
Antec Earthwatts 430D NZXT Gamma Steelseries Kinzu Optical Steelseries Blizzcon Diablo 3 
  hide details  
Reply
post #8288 of 33641
Quote:
Originally Posted by Kolt21 View Post

I made that post for a laugh is all. First smiley is all hey man whats up, should I go 1.45v. second smiley is all, yea look over there at this information you totally can. rofl then the smiley kicking the smiley is a representation of that smiley not doing what he is saying.

Entertainment purposes only. I totally get what you guys are saying.

just what we needed, another funny guy ..LOL thumb.gif
Quote:
Originally Posted by Belial View Post

You know, volts is worse than temps for cpu life and degradation. You've said mutiple times heat is the bigger problem but that isn't true. Hell, look at the graph you quote. You can clearly see turning that VID to 'mid' would cause the cpu to degrade sooooo much quicker then temps would, and that's assuming a similar exponential curve, which would more likely be steeper.

Didn't sin say 1.6vcore on ambient cooling ? There isnt isn'treally a max vcore for ivy because no one knows, they are hardy chips, and unlike sandy you dondon'thave many reports of degradation or killing the chip.

pls show me where Sin says 1.6V vcore..
the highest he says if i look at his graph again, is 1.55V on air water.
1.6V and above on air/water is the killing zone..im not saying high temps are the only thing degrading your chip,
just want to make peeps aware that theres more to degradation then only high vcore..
but before we go into another useless round/pages full of discussion, i just let others decide if its of any use,
im not gonna debate this, at least not with you, i know you by now ...no thanks smile.gif

"There isnt isn'treally a max vcore for ivy because no one knows,"

i think i said that in my other posts too, nice quote.. thumb.gif
Edited by VonDutch - 1/14/13 at 11:33am
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
post #8289 of 33641
Some of us are Friends of Sin0822... Namely me and we have talked for years.. he replys to my PM...

Sin0822 said this plain as day... 1.55v is good 24/7 if your temps are fine.. never go past 1.6v unless your on LN2.

I find 1.45v Barely Worth De lidding for.. An h-100 is good till 1.4v if you did everything right....

A custom loop should be able to run 1.45v again if u did everything right.. you can get a loop to do that for 150$.. not much more then crappy eye sore air coolers..

I have 2 240 rads and 3 360 86mm rads atm heh...

Trying to find a " Giant " res as well.. Go big or stay home..
Edited by Hokies83 - 1/14/13 at 11:48am
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
post #8290 of 33641
Quote:
Originally Posted by Hokies83 View Post

Some of us are Friends of Sin0822... Namely me and we have talked for years.. he replys to my PM...

Sin0822 said this plain as day... 1.55v is good 24/7 if your temps are fine.. never go past 1.6v unless your on LN2.

I find 1.45v Barely Worth De lidding for.. An h-100 is good till 1.4v if you did everything right....

A custom loop should be able to run 1.45v again if u did everything right.. you can get a loop to do that for 150$.. not much more then crappy eye sore air coolers..

I have 2 240 rads and 3 360 86mm rads atm heh...

Trying to find a " Giant " res as well.. Go big or stay home..

How big is giant?
Feed The Dada
(12 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-2600k Asrock Z77e-itx MSI 7970 Samsung 30nm 8GB 
Hard DriveCoolingCoolingOS
Samsung 840 250GB SSD H100 w/ 2x SP120 Antec Kuhler 920 w/ 1x SP120 Linux Ubuntu 10.10 
PowerCaseAudioAudio
Seasonic X650 Bitfenix Prodigy E07K HFI-580 
  hide details  
Reply
Feed The Dada
(12 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-2600k Asrock Z77e-itx MSI 7970 Samsung 30nm 8GB 
Hard DriveCoolingCoolingOS
Samsung 840 250GB SSD H100 w/ 2x SP120 Antec Kuhler 920 w/ 1x SP120 Linux Ubuntu 10.10 
PowerCaseAudioAudio
Seasonic X650 Bitfenix Prodigy E07K HFI-580 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide