Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 851

post #8501 of 33576
Quote:
Originally Posted by [CyGnus] View Post

My opinion is this, if you delide a cpu why are you worried if the TIM is harder to clean... And if you buy CLP for the die why not also use it on the IHS? Just my 2cents.gif

that is a very fair point - the only counter argument is:
What if you want to change cooler, or remove it for some reason.

More so, if one is easier to clean than the other, however the only difference is between 1-3c ON the IHS, then it's better going for the "safer" bet.

I actually checked in my drawers I have the MX-2 NOT the MX-4 I thought I had all along LOL

Oh good info about shapes and forms to put on your IHS/cooler:
http://benchmarkreviews.com/index.php?option=com_content&task=view&id=170&Itemid=1&limit=1&limitstart=4
Edited by Totally Dubbed - 1/15/13 at 3:25pm
post #8502 of 33576
I'd rather have my cooler's base intact in case I need to resell my Silver Arrow really...but that's just me.
post #8503 of 33576
You guys now that difficult to clean is not the same as impossible right? But we are all free to do as we please wheee.gif so everyone uses the tims they want to use thumb.gif
post #8504 of 33576
Guys, quick!

http://hwbot.org/submission/2345331_remiko_cinebench_r11.5_core_i7_2600k_10.57_points

See that? New bench at hwbot...no points but I know you all love cinebench xD
post #8505 of 33576
Quote:
Originally Posted by chronicfx View Post

If you check the kboost box it will run at a fixed frequency. Look for it in precision.

Just tried it, first with default k boost unchecked, then with k boost checked, exact same boost clocks.
Quote:
Originally Posted by Valgaur View Post

Well screw you too phone.... ugh.

Remember guys im still planning on doing a nice indepth video for delidding and I can also use ole Franky for this diagram as well. For I believe Kolt and the cougar fans. They are the best cfm for rads but the price is high that's why I also recommended the sickles its really personal choices in my head.

FtW420. Are you going to Toronto? Its a 20 hour drive for me lol. Still planning on going but just curious if im all alone. Forever alone.... lol

Uuuuuuuuuuuuhm sorry very tired and on here in my art class. Woo freaking hoo right? If you got any questions let me know on here and ill try to respond lol. Darn you VonDutch and being able to be on here and more awake than me!!!!! :mad

Still planning on it, last time it was about 5 hours flight time + a few hours in airports changing planes.
Quote:
Originally Posted by feniks View Post

LOL! that's a devil's pact biggrin.gif ... god deal either way wink.gif
GLWS man!
where did you see this information?
Sandy Bridge 1155 TJunctionmax was 98C
Ivy Bridge 1155 TJunctionMax is at 105C ...
LOL, this thread is insanely popular and actually one of my favorites on OCN wink.gif
... wondering why others avoid it ...
Last time I heard, the 700 series was delayed until November, no? maybe I'm wrong, but I wouldn't hold my breath for 780 appearing in March ...

Doubt we will see it in march as well, but should get some news by then about specs, & hopefully news about when we can expect it.
Quote:
Originally Posted by ivanlabrie View Post

Well, this is going be long...
AMD beats Nvidia this gen, even with lower clocks. (after 12.11b drivers) Get a 7970 or 7950.
Internal PLL ovevoltage is a MUST for high ram overclocking and multipliers higher than 47x.
It's gonna help getting things stable.
Not the same thing really, it's a different voltage altogether, despite the similar name.
It's not a thing you can change manually, but having it in Enabled helps so use it!
hehehe...you CAN'T rma delidded chips, remember? wink.gif

Yeah followers of both camps are happy with gaming results, as far as overall performance, AMD. What wins at stock clocks has gone back & forth, for overclocked results the 600 series has been behind since release day.
Did this last night with the 3770k on air4 & 7970 on water

tesselation enabled, still beating my 1400/1800 680 for graphics score. only 200 points behind my ln2 cooled 1670/1800 680 graphics score
79701113527.jpg

Tesselation off, 680 left in the dust.
79701115489.jpg

Edit, just saw the cinebench record, beaten!
cine1176.jpg
    
CPUMotherboardGraphicsRAM
i7 990x/3930k/3770k/4770k GB x58a-OC/Asus RIVE/x79 gd65/z77 mpower/z77 MV... gtx480s/gtx580s/7970s/680s/Titan Hyper/PSC/BBSE/Hynix/Samsung 
Hard DriveOptical DriveCoolingOS
HDDs/SSDs DVD Air/water/phase/copper pot Windowz 
MonitorKeyboardPowerCase
samsung 2320 Razer Lycosa ax1200 carboard box 
Mouse
Trackball 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 990x/3930k/3770k/4770k GB x58a-OC/Asus RIVE/x79 gd65/z77 mpower/z77 MV... gtx480s/gtx580s/7970s/680s/Titan Hyper/PSC/BBSE/Hynix/Samsung 
Hard DriveOptical DriveCoolingOS
HDDs/SSDs DVD Air/water/phase/copper pot Windowz 
MonitorKeyboardPowerCase
samsung 2320 Razer Lycosa ax1200 carboard box 
Mouse
Trackball 
  hide details  
Reply
post #8506 of 33576
Quote:
Originally Posted by Notion View Post

has anyone noticed any degradation with the ivy bridge i7 3770k.. basically i have just reinstalled my water cooling and clocked it back to 4.8ghz.. expecting to use the same settings at 1.36v, but i am not finding that i have to go to 1.38v.. since having the water cooling out, i have lapped the IHS and water block... other wise i have been running it at 4.5ghz.. @ 1.25 V.. it seems that higher oveclocks are demanding more voltage.. anyone else noticed this.. or is my chip a load of proverbial Poop..

I ran 1.55v for awhile and alot of stress testing 0 degrading,

When i installed my custom loop and temps dropped 15c i was able to do the same OC at 1.5v


Also the guys talking about how hard CLP is to get off..

I sanded it smooth and keep the little bit of silver on it.. i think it fills in the micro holes.. then put more tim on it... And got excellent temps.

I cannot show any results cause that rig is on the table atm while i do a massive rebuild with 1400mm of 86mm rad LOL

more or less just for E Peen cause it fits in my Mountain mods case... And i got 3 360mm Monsta 86mm rads + XSPC res / pump for 270$ shipped..

To add to my 2 Monsta 240 86 mm rads and Apongee Drive 2 block / pump which has the MCP 35x pump in it.. lol should be an Amazing E Peen build...

Wonder if i can call it " Water loop E Peen Build Log" and the mods be ok with that build log name lol...

However i do like the " Valguar why you mad bro build log" lol.

My case should be here in the morning and my rads and extra pumps later in the week ill get pics..

Waiting to RMA my board.. and find a very sick Res..
Edited by Hokies83 - 1/15/13 at 4:35pm
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
post #8507 of 33576
Quote:
Originally Posted by Hokies83 View Post

I ran 1.55v for awhile and alot of stress testing 0 degrading,

When i installed my custom loop and temps dropped 15c i was able to do the same OC at 1.5v


Also the guys talking about how hard CLP is to get off..

I sanded it smooth and keep the little bit of silver on it.. i think it fills in the micro holes.. then put more tim on it... And got excellent temps.

I cannot show any results cause that rig is on the table atm while i do a massive rebuild with 1400mm of 86mm rad LOL

more or less just for E Peen cause it fits in my Mountain mods case... And i got 3 360mm Monsta 86mm rads + XSPC res / pump for 270$ shipped..

To add to my 2 Monsta 240 86 mm rads and Apongee Drive 2 block / pump which has the MCP 35x pump in it.. lol should be an Amazing E Peen build...

Wonder if i can call it " Water loop E Peen Build Log" and the mods be ok with that build log name lol...

However i do like the " Valguar why you mad bro build log" lol.

My case should be here in the morning and my rads and extra pumps later in the week ill get pics..

Waiting to RMA my board.. and find a very sick Res..


RMA the board?? what happened?
post #8508 of 33576
Quote:
Originally Posted by chris-br View Post

RMA the board?? what happened?

Bent pins

I have friends and can get my Board RMAed for free..

So i can resale for full value instead of much lower value with bent pins even tho fixxed id have to ask 25% less for it.

Im upgrading to haswell when it is released in Q2.

Which requires selling my 3770k+MB
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
post #8509 of 33576
Quote:
Originally Posted by Hokies83 View Post

Bent pins

I have friends and can get my Board RMAed for free..

So i can resale for full value instead of much lower value with bent pins even tho fixxed id have to ask 25% less for it.

Im upgrading to haswell when it is released in Q2.

Which requires selling my 3770k+MB

You have a very nice chip there......... why sell it?
post #8510 of 33576
Quote:
Originally Posted by Hokies83 View Post

Bent pins

I have friends and can get my Board RMAed for free..

So i can resale for full value instead of much lower value with bent pins even tho fixxed id have to ask 25% less for it.

Im upgrading to haswell when it is released in Q2.

Which requires selling my 3770k+MB

I'll give you $50 for the whole setup. It's a good deal, take it. smile.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide