Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 898

post #8971 of 33661
Quote:
Originally Posted by VonDutch View Post

191blck? bet i need more vcore then ..lol

a member here said theres a "competition" with highest blck,
thats why i looked into it, i think Sin0822 has 115 blck and another 111blck,
so i thought, that cant be so hard, lets go ...nah...108 for me..lol
but im a noob compared to sin ..haha

Yea you just gotta know whats important in the voltages. Its also a combination to the chip and motherboard.
post #8972 of 33661
Quote:
Originally Posted by DiamondCut View Post

Yea you just gotta know whats important in the voltages. Its also a combination to the chip and motherboard.

i dont remember how my setting where, i reverted back to stock speed, maybe i left vcore on auto,
thats why i said, i didnt tweak anything,maybe if i have some more pointers, i will try again,
but the stress on other componenets on the mobo is big, with those kind of blck's,
i only see (high) blck oc used with ln/2 etc, for coldbug and coldboot i think, and to get higher oc's of couse ..lol

redid 3D mark this afternoon,

http://www.3dmark.com/3dm11/5610020
went from 10716 to 10790, not bad for my daily oc smile.gif
prolly need faster ram if i ever want to break that 11000 right..
Edited by VonDutch - 1/18/13 at 10:01am
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
post #8973 of 33661
heres mine 670 FTW biggrin.gif
http://www.3dmark.com/3dm11/5552910
http://www.3dmark.com/3dm11/5496897
Edited by lilchronic - 1/18/13 at 10:07am
Daily Rig
(21 items)
 
Bench Setup
(19 items)
 
 
CPUMotherboardGraphicsRAM
5820k 4.7Ghz @ 1.28vcore / 1.88vccin Gigabyte x99 SOC Champion EVGA GTX 1080Ti G.SKILL Trident Z 32GB 3200Mhz CL14 
Hard DriveHard DriveHard DriveHard Drive
2x Intel 520 120Gb SSD in RAID 0  Intel 180Gb 530 SSD OS Drive 2Tb WD HDD  2x Intel 730 SSD 480GB in RAID 0 
CoolingCoolingCoolingCooling
2x HWLabs GTX360 Black Ice in Push Pull EK blocks for CPU / GPU's 6x corsair sp120 2350RPM 6x Ek Vardar 120 F4's 2200rpm  
OSMonitorKeyboardPower
windows 10 XB270HU 2560x1440 - 144Hz - G-sync Razor blackwidow cooler master V1000 
CaseMouseMouse PadAudio
Corsair 780T EVGA TORQ x10 evga mouse pad 2.1 audio / Hyper X cloud II / Sennheiser Gam... 
Other
EK pump / res 
CPUMotherboardGraphicsGraphics
6600k Z170M OC Formula GTX780Ti AMD HD6450 
RAMHard DriveHard DriveHard Drive
Trident Z 3600Mhz cl16 2x8GB 120Gb intel 520 120Gb intel 520 64Gb adata ssd  
Hard DriveOptical DriveCoolingCooling
750Gb WD Black Sony  F1 Gemini CPU Pot Tek - 9 Fat 
CoolingOSMonitorPower
custom loop two 240rad's xp,W7,W8,W10 x-star 2560x1440  Rosewill Quark-650 Platinum / Antec HCP-850 Pla... 
CaseMouseMouse Pad
Dimastech Mini V1.0 black razor abyssus Razor 
  hide details  
Reply
Daily Rig
(21 items)
 
Bench Setup
(19 items)
 
 
CPUMotherboardGraphicsRAM
5820k 4.7Ghz @ 1.28vcore / 1.88vccin Gigabyte x99 SOC Champion EVGA GTX 1080Ti G.SKILL Trident Z 32GB 3200Mhz CL14 
Hard DriveHard DriveHard DriveHard Drive
2x Intel 520 120Gb SSD in RAID 0  Intel 180Gb 530 SSD OS Drive 2Tb WD HDD  2x Intel 730 SSD 480GB in RAID 0 
CoolingCoolingCoolingCooling
2x HWLabs GTX360 Black Ice in Push Pull EK blocks for CPU / GPU's 6x corsair sp120 2350RPM 6x Ek Vardar 120 F4's 2200rpm  
OSMonitorKeyboardPower
windows 10 XB270HU 2560x1440 - 144Hz - G-sync Razor blackwidow cooler master V1000 
CaseMouseMouse PadAudio
Corsair 780T EVGA TORQ x10 evga mouse pad 2.1 audio / Hyper X cloud II / Sennheiser Gam... 
Other
EK pump / res 
CPUMotherboardGraphicsGraphics
6600k Z170M OC Formula GTX780Ti AMD HD6450 
RAMHard DriveHard DriveHard Drive
Trident Z 3600Mhz cl16 2x8GB 120Gb intel 520 120Gb intel 520 64Gb adata ssd  
Hard DriveOptical DriveCoolingCooling
750Gb WD Black Sony  F1 Gemini CPU Pot Tek - 9 Fat 
CoolingOSMonitorPower
custom loop two 240rad's xp,W7,W8,W10 x-star 2560x1440  Rosewill Quark-650 Platinum / Antec HCP-850 Pla... 
CaseMouseMouse Pad
Dimastech Mini V1.0 black razor abyssus Razor 
  hide details  
Reply
post #8974 of 33661
Ok guys I finally delided my chip! I have no pics however as I hit the Die with the razor and thought I'd killed it so I was in no mood to take photos frown.gif

I did however finish cleaning it up (had to test it) and popped her back in, using Phoyba HeGrease on both die and IHS. I have liquid Pro however I didn't want to waste it on potential dead chip.

Anyway, here's a screen shot of a 1hr Prime95 27.7 with AVX @ 5500MB Custom Blend test.

My Gaming Rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 4770K Z97X-SOC Force MSI GTX 1070 FE G.Skill TridentX 2400Mhz CL9 
Hard DriveCoolingCoolingCooling
2 Crucial M4 256GB XSPC RX360 + RX240 + RX120 XSPC Raystorm EK 1070FE WB 
OSMonitorKeyboardPower
Win 10 64 Qnix QX2710 96Hz CM Storm Rapid Coolermaster V Series 850w 
CaseMouseMouse PadAudio
NZXT Switch 810 Mionix Mionix Onboard Sound / HD449s 
  hide details  
Reply
My Gaming Rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 4770K Z97X-SOC Force MSI GTX 1070 FE G.Skill TridentX 2400Mhz CL9 
Hard DriveCoolingCoolingCooling
2 Crucial M4 256GB XSPC RX360 + RX240 + RX120 XSPC Raystorm EK 1070FE WB 
OSMonitorKeyboardPower
Win 10 64 Qnix QX2710 96Hz CM Storm Rapid Coolermaster V Series 850w 
CaseMouseMouse PadAudio
NZXT Switch 810 Mionix Mionix Onboard Sound / HD449s 
  hide details  
Reply
post #8975 of 33661
Quote:
Originally Posted by Matt26LFC View Post

Ok guys I finally delided my chip! I have no pics however as I hit the Die with the razor and thought I'd killed it so I was in no mood to take photos frown.gif

I did however finish cleaning it up (had to test it) and popped her back in, using Phoyba HeGrease on both die and IHS. I have liquid Pro however I didn't want to waste it on potential dead chip.

Anyway, here's a screen shot of a 1hr Prime95 27.7 with AVX @ 5500MB Custom Blend test.
Warning: Spoiler! (Click to show)

looks good to me, so it works?
did you check the die, any sign of damage?
the die is made of harder material then the pcb,
so its harder to damage, 1 nick on the pcb most of the time means trouble..
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
post #8976 of 33661
Quote:
Originally Posted by FtW 420 View Post

Up7 is right up there, the mvg & mve still hold more records, but have been around longer with more submissions.

Quote:
Originally Posted by Swag View Post

Yea, don't buy parts from Ebay, I can't trust the people on that site anymore. I've seen how some people treat their hardware and they are always just tossing it randomly!

How do you guys think SLI would work on the MVG? It's so hard to fit the D14 + a GPU...

With wc it would be easy, otherwise it's really cramped in there...I have one.
Quote:
Originally Posted by Gomi View Post

I tried BCLK overclocking, but did not get over 103 without the system shutting down - There is probably alot more to it than just upping the BCLK but to be honest I switched to Memory overclocking and the plethora of timings there are (The Memory section on the UP7 is like watching the screens in "The Matrix").

Though, getting validation on the UP7 was easy as flicking a lightswitch - Just put it in LN2 mode (Small switch on MOBO) - Up the BCLK by 1 or 0.1 (OC Touch buttons) and switch the the LN2 mode off again - Validate and back into LN2 mode (LN2 mode forces the CPU down to 1600Mhz).

Could anyone shine some light on just exactly WHY someone would ever use BCLK ? Does the CPU and RAM not still require an increase in Vcore when increasing the BCLK ? Pros in BCLK overclocking ?

BCLK is for extreme oc using ln2* and to push ram higher while at it. Not all ratios work good so sometimes you need to use bclk to get to an intermediate oc that will work.
With ln2 or Dry ice you can easily hit 110mhz bclk or more.

*Max multi is 63...hint.
Quote:
Originally Posted by VonDutch View Post

191blck? bet i need more vcore then ..lol

a member here said theres a "competition" with highest blck,
thats why i looked into it, i think Sin0822 has 115 blck and another 111blck,
so i thought, that cant be so hard, lets go ...nah...108 for me..lol
but im a noob compared to sin ..haha

Again, subzero...and my MVG for instance has some settings to fiddle with to get the best bclk oc as possible, not sure other mobos has them. UP7 must have something similar though.
Edited by ivanlabrie - 1/18/13 at 11:38am
post #8977 of 33661
Quote:
Originally Posted by VonDutch View Post

looks good to me, so it works?
did you check the die, any sign of damage?
the die is made of harder material then the pcb,
so its harder to damage, 1 nick on the pcb most of the time means trouble..

Yeah its working, when I caught it I was 99.9% sure I'd killed it! I was so disappointed

There is visible damage to it. Perhaps 2morrow if I break her down again (to put Cool Labs Liquid Pro on it) I'll see if I can take a good photo of it with my Girlfriends DSLR and post it here

But yeah, quite happy so far. Was hoping my core temperatures would be a bit closer together afterwards too, bugs me seeing upto a 10C difference lol
My Gaming Rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 4770K Z97X-SOC Force MSI GTX 1070 FE G.Skill TridentX 2400Mhz CL9 
Hard DriveCoolingCoolingCooling
2 Crucial M4 256GB XSPC RX360 + RX240 + RX120 XSPC Raystorm EK 1070FE WB 
OSMonitorKeyboardPower
Win 10 64 Qnix QX2710 96Hz CM Storm Rapid Coolermaster V Series 850w 
CaseMouseMouse PadAudio
NZXT Switch 810 Mionix Mionix Onboard Sound / HD449s 
  hide details  
Reply
My Gaming Rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 4770K Z97X-SOC Force MSI GTX 1070 FE G.Skill TridentX 2400Mhz CL9 
Hard DriveCoolingCoolingCooling
2 Crucial M4 256GB XSPC RX360 + RX240 + RX120 XSPC Raystorm EK 1070FE WB 
OSMonitorKeyboardPower
Win 10 64 Qnix QX2710 96Hz CM Storm Rapid Coolermaster V Series 850w 
CaseMouseMouse PadAudio
NZXT Switch 810 Mionix Mionix Onboard Sound / HD449s 
  hide details  
Reply
post #8978 of 33661
Quote:
Originally Posted by Matt26LFC View Post

Yeah its working, when I caught it I was 99.9% sure I'd killed it! I was so disappointed

There is visible damage to it. Perhaps 2morrow if I break her down again (to put Cool Labs Liquid Pro on it) I'll see if I can take a good photo of it with my Girlfriends DSLR and post it here

But yeah, quite happy so far. Was hoping my core temperatures would be a bit closer together afterwards too, bugs me seeing upto a 10C difference lol

Don't worry, I did the same thing. I barely nicked the PCB when I was delidding and mine is fine and working..


BTW everyone I've taken a break from messing with my CPU to mod some LEDs in my Switch 810 case. Currently soldering smile.gif
White Flood
(18 items)
 
HP HPE-1418
(11 items)
 
 
CPUMotherboardGraphicsRAM
i5-3570K De-Lidded @4.5Ghz 1.33v ASUS P8Z77-V VK XFX Radeon R7770 G.Skill RipjawX (4x4) 
Hard DriveHard DriveHard DriveCooling
ADATA SP900  WD Caviar Blue Seagate Cooler Mastery Hyper 212+ EVO 
CoolingOSMonitorMonitor
Noctura Nf-12 Windows 7 Ultimate HP 2007w Emerson 32" HDTV 
KeyboardPowerCaseMouse
I Stole One Seasonic 620w Modular PSU NZXT Switch 810 I Stole One 
Mouse PadAudio
My Desk Through MoBo 
CPUMotherboardGraphicsRAM
AMD FX-6100 Gigabyte M3970AM-HP Radeon HD 7450 10GB PC3-10600 DDR3-1333 
Hard DriveOptical DriveOSMonitor
SATA HD 3.0Gb/s SuperMulti DVD Burner Drive Windows 7 Premium HP w1907 
KeyboardPowerCase
HP Keyboard ATX 300w Mid-size ATX 
CPUMotherboardGraphicsRAM
DIGIC4 Processor TTL-CT-SIR AF-dedicated CMOS sensor Digital Single Lens Reflex 18.7MP 3.7FPS 
Hard DriveHard DriveOSMonitor
SDHC Class 10 SDHC Class 10 Magic Lantern 1.02 3" Rotating LCD 
Power
Battery Pack LP-E8 
  hide details  
Reply
White Flood
(18 items)
 
HP HPE-1418
(11 items)
 
 
CPUMotherboardGraphicsRAM
i5-3570K De-Lidded @4.5Ghz 1.33v ASUS P8Z77-V VK XFX Radeon R7770 G.Skill RipjawX (4x4) 
Hard DriveHard DriveHard DriveCooling
ADATA SP900  WD Caviar Blue Seagate Cooler Mastery Hyper 212+ EVO 
CoolingOSMonitorMonitor
Noctura Nf-12 Windows 7 Ultimate HP 2007w Emerson 32" HDTV 
KeyboardPowerCaseMouse
I Stole One Seasonic 620w Modular PSU NZXT Switch 810 I Stole One 
Mouse PadAudio
My Desk Through MoBo 
CPUMotherboardGraphicsRAM
AMD FX-6100 Gigabyte M3970AM-HP Radeon HD 7450 10GB PC3-10600 DDR3-1333 
Hard DriveOptical DriveOSMonitor
SATA HD 3.0Gb/s SuperMulti DVD Burner Drive Windows 7 Premium HP w1907 
KeyboardPowerCase
HP Keyboard ATX 300w Mid-size ATX 
CPUMotherboardGraphicsRAM
DIGIC4 Processor TTL-CT-SIR AF-dedicated CMOS sensor Digital Single Lens Reflex 18.7MP 3.7FPS 
Hard DriveHard DriveOSMonitor
SDHC Class 10 SDHC Class 10 Magic Lantern 1.02 3" Rotating LCD 
Power
Battery Pack LP-E8 
  hide details  
Reply
post #8979 of 33661
Quote:
Originally Posted by Matt26LFC View Post

Yeah its working, when I caught it I was 99.9% sure I'd killed it! I was so disappointed

There is visible damage to it. Perhaps 2morrow if I break her down again (to put Cool Labs Liquid Pro on it) I'll see if I can take a good photo of it with my Girlfriends DSLR and post it here

But yeah, quite happy so far. Was hoping my core temperatures would be a bit closer together afterwards too, bugs me seeing upto a 10C difference lol

bet you are happy, glad it works thumb.gif
yea, if you use liquid pro, its its good applied etc, the temp difference will be less, and your temps will go down some more too,
pics would be great smile.gif
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
post #8980 of 33661
Thread Starter 
Holy crap guys...... we moved 100 pages in under a week..... it's been slightly over 5 days since page 800..... Man we are hoppin in here and all these smart people!!! thumb.gif

Lets keep this up guys! biggrin.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide