Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide
New Posts  All Forums:Forum Nav:

[Official] Delidded Club / Guide - Page 982

post #9811 of 33558
I have a 3770K I think is a good candidate for delidding. Running Prime 95 8K fft's @ 4.5GHz I see top core temp of 87C. That's with a D5, Raystorm block, an EX240 & RX360 radiators with push/pull fans running wide open. Voltage isn't too bad, but not the best, 1.272 Vcore with a spike to 1.296 from time to time during the testing.

When I first got this particular 3770K months ago I did some quick stress testing with the fans running low speed and was freaked to see the core temps almost hit 100C. After reseating the block and some time for the TIM to get settled I'm still in the high 80's, which is unacceptable to me since I'm temperature limited to x45 OC.

So anyway I have some Coollaboratory LIQUID PRO TIM on the way, and I need to pick up some razor blades.

Wanted to thank all you who have gone before, hope to be joining the club in the next few weeks.
post #9812 of 33558
Quote:
Originally Posted by [CyGnus] View Post

Dont know if true, my 3570K needs 1.18v for 4.5GHz 1.24v for 4.6GHz 1.29v for 4.7GHz 1.36v for 4.8GHz after that it just isnt stable for 24/7 no matter the voltage

yea, that is a bit strange, maybe i should rethink what im trying to do,
was trying to find a way to see if a chip is worth delidding vcore wise,
by comparing good/high ocers with the vcores they need at 4.5ghz,
because almost all undelidded ivy's can run 4.5ghz,

mine needs 1.235V vcore to make 4.5ghz run stable, and its a average ocer,
at 4.8ghz i need 1.420V vcore
4.9ghz is a no go for me, needs about 1.510V vcore..

i thought 4.5ghz would be a nice one to use for comparison
besides the tempdrops if you do..
4.8ghz at 1.36V vcore is still very good, you still should be able to run 4.9ghz,
cant imagine you make a 0.160V vcore jump between 4.8 and 4.9ghz, and hit 1.52V vcore that way tho smile.gif

dont know if this post makes sense, im (very)tired ..lol
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
post #9813 of 33558
Quote:
Originally Posted by mandrix View Post

I have a 3770K I think is a good candidate for delidding. Running Prime 95 8K fft's @ 4.5GHz I see top core temp of 87C. That's with a D5, Raystorm block, an EX240 & RX360 radiators with push/pull fans running wide open. Voltage isn't too bad, but not the best, 1.272 Vcore with a spike to 1.296 from time to time during the testing.

When I first got this particular 3770K months ago I did some quick stress testing with the fans running low speed and was freaked to see the core temps almost hit 100C. After reseating the block and some time for the TIM to get settled I'm still in the high 80's, which is unacceptable to me since I'm temperature limited to x45 OC.

So anyway I have some Coollaboratory LIQUID PRO TIM on the way, and I need to pick up some razor blades.

Wanted to thank all you who have gone before, hope to be joining the club in the next few weeks.

yea, join the club..lol thumb.gif
yep, i know that, i hit 105C at 4.5ghz, just a shame if you have that kind of (great) cooling, and still be limited by temps..
you could start with reading page 1, theres alot of info under the spoilers, i took about 1 month to prepare for the delid, by reading,
and watching all vid's i could find smile.gif
Edited by VonDutch - 1/25/13 at 6:04am
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
post #9814 of 33558
Quote:
Originally Posted by alancsalt View Post

The first post has no banner......

My crap effort at something for first post......



Diamond Cut is better at it..thumb.gif

nice one alancsalt, keep em coming, the more we can choose from .. biggrin.gif
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
BamBam
(17 items)
 
Pebbles
(14 items)
 
 
CPUMotherboardGraphicsRAM
amd 8350 my kids rig :) Gigabyte 990fxa-ud3 Gigabyte 7970 windforce Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveHard DriveCoolingOS
500gb OZC vertex 4  Scythe Mugen 3 rev b windows 8.1 
MonitorKeyboardPowerCase
acer 23 inch logitech G510 XFX ProSeries 750W XXX Edition Cooler Master CM 690 II 
MouseAudio
dell  Logitech X-530 
  hide details  
Reply
post #9815 of 33558
First box is here wink.gif

    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
post #9816 of 33558
Quote:
Originally Posted by mandrix View Post

I have a 3770K I think is a good candidate for delidding. Running Prime 95 8K fft's @ 4.5GHz I see top core temp of 87C. That's with a D5, Raystorm block, an EX240 & RX360 radiators with push/pull fans running wide open. Voltage isn't too bad, but not the best, 1.272 Vcore with a spike to 1.296 from time to time during the testing.

When I first got this particular 3770K months ago I did some quick stress testing with the fans running low speed and was freaked to see the core temps almost hit 100C. After reseating the block and some time for the TIM to get settled I'm still in the high 80's, which is unacceptable to me since I'm temperature limited to x45 OC.

So anyway I have some Coollaboratory LIQUID PRO TIM on the way, and I need to pick up some razor blades.

Wanted to thank all you who have gone before, hope to be joining the club in the next few weeks.

Quick tip or rather just a piece of knowledge for you. I have the same waterblock and because of how tight it sits it really pushed my ihs onto the PCB so it takes a bit of extra time and patience to get the blade in. Good luck im sure youll do fine thumb.gif
R@WR
(16 items)
 
Rawr V2
(16 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 3770k Z77 MPower (MS-7751) Asus Radeon R9 290 Corsair Dominator DHX Pro 
Hard DriveHard DriveOptical DriveCooling
OCZ Vertex 3 SSD Seagate Barracuda LG Super Multi XSPC Raystorm laing ddc 3.25, ex 240 Swiftech X... 
OSMonitorKeyboardPower
Windows 8.1 Pro LG 24inch led Backlit Corsair K60 XFX 850WPro Fully Modular 
CaseMouseMouse PadAudio
Bitfenix Ronin Steel Series Sensei Razer Goliathus Steel Series Siberius V2 
CPUMotherboardGraphicsRAM
3770k Msi z77 mpower EVGA GTX 980 Corsair Dominator 
Hard DriveHard DriveCoolingOS
WD Blue OCZ Vertex 3 SSD Custom Water Cooling, Darkside 6 port reservoir... Windows 8.1 
MonitorKeyboardPowerCase
LG 24 inch 1080P CM Quickfire Rapid, custom keys from WASD XFX Pro Fully modular 850W Gold Corsair Air 540 
MouseMouse PadAudioAudio
Corsair M65 Razer Goliathus Roccat Kave True 5.1 Headset Asus Xonar DX 7.1 Sound card 
  hide details  
Reply
R@WR
(16 items)
 
Rawr V2
(16 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 3770k Z77 MPower (MS-7751) Asus Radeon R9 290 Corsair Dominator DHX Pro 
Hard DriveHard DriveOptical DriveCooling
OCZ Vertex 3 SSD Seagate Barracuda LG Super Multi XSPC Raystorm laing ddc 3.25, ex 240 Swiftech X... 
OSMonitorKeyboardPower
Windows 8.1 Pro LG 24inch led Backlit Corsair K60 XFX 850WPro Fully Modular 
CaseMouseMouse PadAudio
Bitfenix Ronin Steel Series Sensei Razer Goliathus Steel Series Siberius V2 
CPUMotherboardGraphicsRAM
3770k Msi z77 mpower EVGA GTX 980 Corsair Dominator 
Hard DriveHard DriveCoolingOS
WD Blue OCZ Vertex 3 SSD Custom Water Cooling, Darkside 6 port reservoir... Windows 8.1 
MonitorKeyboardPowerCase
LG 24 inch 1080P CM Quickfire Rapid, custom keys from WASD XFX Pro Fully modular 850W Gold Corsair Air 540 
MouseMouse PadAudioAudio
Corsair M65 Razer Goliathus Roccat Kave True 5.1 Headset Asus Xonar DX 7.1 Sound card 
  hide details  
Reply
post #9817 of 33558
I put some formula 7 on the CPU and GPU of my old C2D and 9800m GS in my laptop, dropped the temps about 20c in both then was able to OC both about 30%. The temps are still much lower than they were stock. Since they're both bare die I think I will put some CLU on there for even better temps. I'll post the validations later but I was pretty happy with the results. I was thinking of upgrading the CPU but they still go for almost $100 on Ebay. If I put an SSD in there it will be one heck of a couch browsing machine!
post #9818 of 33558
Quote:
Originally Posted by stickg1 View Post

I put some formula 7 on the CPU and GPU of my old C2D and 9800m GS in my laptop, dropped the temps about 20c in both then was able to OC both about 30%. The temps are still much lower than they were stock. Since they're both bare die I think I will put some CLU on there for even better temps. I'll post the validations later but I was pretty happy with the results. I was thinking of upgrading the CPU but they still go for almost $100 on Ebay. If I put an SSD in there it will be one heck of a couch browsing machine!
see ur fans? lol

    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 3770k 5.2ghz  GIGABYTE G1 Assassin Sniper 3 7950 with Alphacool block 7950 w/ Alphacool Block 
GraphicsRAMHard DriveCooling
7950 w/ Alphacool block G.SKILL Trident X 2500mhz 2x4gb SanDisk Extreme 240gb sata III 6gbs x5 SwiftTech Apongee Drive II 
CoolingCoolingCoolingOS
Monsta 360 86mm thick rad X 4 MCP 35X Pump x2 400ML Frozen Q Fusion res x3 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
CatLeap 2560x1440 + Acer hn274h bmiiid 120hz 3D Logitech G19 Corsair Ax1200 watts  Mountain Mods Ascension 
MouseAudio
Logitech M570 Pioneer SP-BS21 Bookshelf Loudspeakers + Lepai Amp 
  hide details  
Reply
post #9819 of 33558
The resolution for your avatar is not good vulgar lol... I need to find a new blade!
post #9820 of 33558
Thread Starter 
Today might be the day! Franky 2.0 should be here! Getting very impatient!
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Official] Delidded Club / Guide