First post here.
I have a very similar setup-- this is my first pc, but I've learned very quickly. I got it used for dirt cheap a couple months ago.
Today I flashed the chipset driver, and I'm about to jump in and flash the BIOS too. I think I still have the P06 version. This was my first time to overclock but I was surprised how easy it was with this board, even with a c0. I didn't plan to get that much out of it. Anyway just thought I'd post here first for some reason. Glad this is working out for you.
i7 920 c0 @ 3.74 Ghz (ran prime95 for 8 hours and no problems since... gonna do more when my heatsink arrives)
-cooler master heatsink in the mail--I topped out at 90 in prime95 (yikes, right?), idling from 42-48
-bclk at 178 with 21x multiplier
-vcore +10 mv (1.31v under load)
-uncore +20 mv
-vdimm 1.64v (may tick it back up after some more memtest, so far so good though)
-HT off, though. But I never used it.
3 x 2 GB G-Skill 1600 @ 1424 Mhz
freshly installed Radeon HD 7970 at stock, upgraded from a gtx 285
Corsair 750W PSU
HAF 932 caseEdited by badair - 12/7/12 at 5:04am