Well I was right about the PSU, it has failed badly. Card was sucking 32.7 amps out of a 29amp PSU. It lasted for 5 hours of testing but finaly gave out during a 702/1053 atitool artifact scanning. PSU cant even power up the system with my x850xt anymore, but I barrowed the PSU from my water tower just to power the card and its up and running again. When my new PSU comes in, Ill get back to clocking!!
Originally Posted by ATI83
That test on my ScreenShot was about 30min Test, the temp from the Test was about all the same ,only few C diff.
anyway If you remove the Cooler, You not gone to lost the warranty on the card?
I want to Put some of my AS5 on my video card too but dont want to lose my warranty just because i Remove my cooler.
I wanna see a full 10 minute test, leave the window alone and take a screen shot when it gets to 10 minutes.
Anyways, if you are carefull with the card while removing the heatsink they will never know as they use paste the same color as AS5. But if your temps are "actualy" what you posted there is absolutely no reason for you to remove or do any mods to the card.
ANyways Ill post some atitool screenies of what Ive got so far. In a bit.