New Posts  All Forums:Forum Nav:

0x116 bsod

post #1 of 27
Thread Starter 
Hello everyone,

I know that 0x116 errors are common, but i believe mine is unique. Ive been having this problem for a while now, tried various stuff, none removed my problem permanently, i assume it has to be something with my hardware, but still.I mainly get this BSOD when i am booting my pc up after a "good night's" sleep, i have to restart my pc a few times until it boots normally. I am running windows 7 ultimate x64. Im getting this bsod without overclock, although this problem started when i had my cpu overclocked, it was stable and running for about half a year and these bsods came along, in the middle of games or just windows, then i disabled overclock and this problem kept persisting only while trying to boot to windows. Tried windows8, the problem was gone, no bsods everything was ok, but had some compactibility issues so had to go back to windows 7 and here i am.

My system specs :

Gigabyte Ga-g31m-s2l Motherboard
E6550 intel dual core cpu
550w noname power supply
Asus HD5770
A-Data 4gb ddr2@800mhz ram
Seagate barracuda 360gb 7200rpm harddrive
Windows 7 Ultimate x64
Amd catalyst 12.8


P.S
Tried various versions of amd catalyst, this yielded no results.
System is running without overclock and these dumps i gathered should also be while not running overclocked.
Windows7_Vista_jcgriff2.zip 1537k .zip file
post #2 of 27
Try using a legit copy of windows, or at least downloading the iso directly from them instead.
post #3 of 27
Thread Starter 
Quote:
Originally Posted by wizardskill View Post

Try using a legit copy of windows, or at least downloading the iso directly from them instead.

I am.
post #4 of 27
Quote:
Originally Posted by Excellion View Post

Quote:
Originally Posted by wizardskill View Post

Try using a legit copy of windows, or at least downloading the iso directly from them instead.

I am.
Boot into safe mode, remove gpu drivers, use drivercleaner and or ccleaner to clean the system, reboot into safe mode, install drivers.
post #5 of 27
Hey Excellion smile.gif

I had my rig running for about 4 months (overclocked CPU & GPU's) with no issues and a few weeks ago I kept getting 116 BSOD. Reverted to stock speeds but still the same.
Someone suggested its a drivers issue but even after clean sweep & different drivers also didn't help.
No matter what I did in the BIOS it kept coming at random (sometimes idle, watching movies or playing games).
Then I updated my BIOS and it was gone confused.gif
I still dont understand why since it was working fine for months with the old BIOS.
If you already updated your BIOS, here is some useful info:

0x101 = increase vcore
0x124 = increase/decrease QPI/VTT first, if not increase/decrease vcore...have to test to see which one it is
on i7 45nm, usually means too little VVT/QPI for the speed of Uncore
on i7 32nm SB, usually means too little vCore
0x0A = unstable RAM/IMC, increase QPI first, if that doesn't work increase vcore
0x1A = Memory management error. It usually means a bad stick of Ram. Test with Memtest or whatever you prefer. Try raising your Ram voltage
0x1E = increase vcore
0x3B = increase vcore
0x3D = increase vcore
0xD1 = QPI/VTT, increase/decrease as necessary, can also be unstable Ram, raise Ram voltage
0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances
0x50 = RAM timings/Frequency or uncore multi unstable, increase RAM voltage or adjust QPI/VTT, or lower uncore if you're higher than 2x
0x109 = Not enough or too Much memory voltage
0x116 = Low IOH (NB) voltage, GPU issue (most common when running multi-GPU/overclocking GPU)
0x7E = Corrupted OS file, possibly from overclocking. Run sfc /scannow and chkdsk /r
keep in mind that PLL or VCCIO can also give 124
TheSadFlute
(16 items)
 
DyingHeart
(17 items)
 
 
CPUMotherboardGraphicsRAM
i7-6700K TUF Sabertooth MSI 1080 Ti 16GB 2400MHz C15 
Hard DriveHard DriveHard DriveCooling
Corsair 480GB LE 3TB WD Green Sammy 500GB 850 EVO H100i 
OSMonitorKeyboardPower
Windows 7 Pro  BenQ XR3501 Logitech G710+ EVGA G2 750W 
CaseMouseAudioAudio
Cooler Master Stryker Logitech G602 Asus Strix Nakamichi 5.1 
CPUMotherboardGraphicsRAM
Phenom II X4 965BE  Sapphire 790X Zotac GTX650  4GB Corsair 1066 DDR2 (1GBx4) 
Hard DriveHard DriveCoolingCooling
G.Skill Phoenix Pro 120GB WD 2TB Green Stock 3x120mm UQ fans 
OSMonitorKeyboardPower
W7 Pro SP1 x64 LG 21' 1680x1050 Genius  Corsair CX600 
CaseMouseMouse PadAudio
Gigabyte  E-Blue Mazer XFX WarPad On-board 
Audio
Logitech G35 
  hide details  
Reply
TheSadFlute
(16 items)
 
DyingHeart
(17 items)
 
 
CPUMotherboardGraphicsRAM
i7-6700K TUF Sabertooth MSI 1080 Ti 16GB 2400MHz C15 
Hard DriveHard DriveHard DriveCooling
Corsair 480GB LE 3TB WD Green Sammy 500GB 850 EVO H100i 
OSMonitorKeyboardPower
Windows 7 Pro  BenQ XR3501 Logitech G710+ EVGA G2 750W 
CaseMouseAudioAudio
Cooler Master Stryker Logitech G602 Asus Strix Nakamichi 5.1 
CPUMotherboardGraphicsRAM
Phenom II X4 965BE  Sapphire 790X Zotac GTX650  4GB Corsair 1066 DDR2 (1GBx4) 
Hard DriveHard DriveCoolingCooling
G.Skill Phoenix Pro 120GB WD 2TB Green Stock 3x120mm UQ fans 
OSMonitorKeyboardPower
W7 Pro SP1 x64 LG 21' 1680x1050 Genius  Corsair CX600 
CaseMouseMouse PadAudio
Gigabyte  E-Blue Mazer XFX WarPad On-board 
Audio
Logitech G35 
  hide details  
Reply
post #6 of 27
Thread Starter 
Thanks for the info eXXon, I have F9 bios ( stable version) there are F10 available but they are beta bios so i think i shouldnt go for them, right? biggrin.gif
As far as i've seen, my motherboard does not support IOH voltage control.. ;(
Edited by Excellion - 10/6/12 at 12:09pm
post #7 of 27
I wouldn't recommend it if you were stable, but test it to see if it works, if it doesn't, I think you can revert back to F9.

'IOH PCIE Voltage” would adjust the voltage from PCI Express lanes controlled by the motherboard North Bridge chip (IOH)'

This is from this thread (post 24) :
http://www.overclock.net/t/1131857/where-is-ioh-voltage-on-my-board/20
TheSadFlute
(16 items)
 
DyingHeart
(17 items)
 
 
CPUMotherboardGraphicsRAM
i7-6700K TUF Sabertooth MSI 1080 Ti 16GB 2400MHz C15 
Hard DriveHard DriveHard DriveCooling
Corsair 480GB LE 3TB WD Green Sammy 500GB 850 EVO H100i 
OSMonitorKeyboardPower
Windows 7 Pro  BenQ XR3501 Logitech G710+ EVGA G2 750W 
CaseMouseAudioAudio
Cooler Master Stryker Logitech G602 Asus Strix Nakamichi 5.1 
CPUMotherboardGraphicsRAM
Phenom II X4 965BE  Sapphire 790X Zotac GTX650  4GB Corsair 1066 DDR2 (1GBx4) 
Hard DriveHard DriveCoolingCooling
G.Skill Phoenix Pro 120GB WD 2TB Green Stock 3x120mm UQ fans 
OSMonitorKeyboardPower
W7 Pro SP1 x64 LG 21' 1680x1050 Genius  Corsair CX600 
CaseMouseMouse PadAudio
Gigabyte  E-Blue Mazer XFX WarPad On-board 
Audio
Logitech G35 
  hide details  
Reply
TheSadFlute
(16 items)
 
DyingHeart
(17 items)
 
 
CPUMotherboardGraphicsRAM
i7-6700K TUF Sabertooth MSI 1080 Ti 16GB 2400MHz C15 
Hard DriveHard DriveHard DriveCooling
Corsair 480GB LE 3TB WD Green Sammy 500GB 850 EVO H100i 
OSMonitorKeyboardPower
Windows 7 Pro  BenQ XR3501 Logitech G710+ EVGA G2 750W 
CaseMouseAudioAudio
Cooler Master Stryker Logitech G602 Asus Strix Nakamichi 5.1 
CPUMotherboardGraphicsRAM
Phenom II X4 965BE  Sapphire 790X Zotac GTX650  4GB Corsair 1066 DDR2 (1GBx4) 
Hard DriveHard DriveCoolingCooling
G.Skill Phoenix Pro 120GB WD 2TB Green Stock 3x120mm UQ fans 
OSMonitorKeyboardPower
W7 Pro SP1 x64 LG 21' 1680x1050 Genius  Corsair CX600 
CaseMouseMouse PadAudio
Gigabyte  E-Blue Mazer XFX WarPad On-board 
Audio
Logitech G35 
  hide details  
Reply
post #8 of 27
Thread Starter 
I went through all of my bios again, i only have cpu voltage control , and some fsb/ram overvoltage settings, thats it.

Oh and i forgot to mention, i was had my system running stable for like half a year at 3.15ghz and now i can barerly overclock at all.
Edited by Excellion - 10/6/12 at 1:45pm
post #9 of 27
Do you have another PSU to check with?
TheSadFlute
(16 items)
 
DyingHeart
(17 items)
 
 
CPUMotherboardGraphicsRAM
i7-6700K TUF Sabertooth MSI 1080 Ti 16GB 2400MHz C15 
Hard DriveHard DriveHard DriveCooling
Corsair 480GB LE 3TB WD Green Sammy 500GB 850 EVO H100i 
OSMonitorKeyboardPower
Windows 7 Pro  BenQ XR3501 Logitech G710+ EVGA G2 750W 
CaseMouseAudioAudio
Cooler Master Stryker Logitech G602 Asus Strix Nakamichi 5.1 
CPUMotherboardGraphicsRAM
Phenom II X4 965BE  Sapphire 790X Zotac GTX650  4GB Corsair 1066 DDR2 (1GBx4) 
Hard DriveHard DriveCoolingCooling
G.Skill Phoenix Pro 120GB WD 2TB Green Stock 3x120mm UQ fans 
OSMonitorKeyboardPower
W7 Pro SP1 x64 LG 21' 1680x1050 Genius  Corsair CX600 
CaseMouseMouse PadAudio
Gigabyte  E-Blue Mazer XFX WarPad On-board 
Audio
Logitech G35 
  hide details  
Reply
TheSadFlute
(16 items)
 
DyingHeart
(17 items)
 
 
CPUMotherboardGraphicsRAM
i7-6700K TUF Sabertooth MSI 1080 Ti 16GB 2400MHz C15 
Hard DriveHard DriveHard DriveCooling
Corsair 480GB LE 3TB WD Green Sammy 500GB 850 EVO H100i 
OSMonitorKeyboardPower
Windows 7 Pro  BenQ XR3501 Logitech G710+ EVGA G2 750W 
CaseMouseAudioAudio
Cooler Master Stryker Logitech G602 Asus Strix Nakamichi 5.1 
CPUMotherboardGraphicsRAM
Phenom II X4 965BE  Sapphire 790X Zotac GTX650  4GB Corsair 1066 DDR2 (1GBx4) 
Hard DriveHard DriveCoolingCooling
G.Skill Phoenix Pro 120GB WD 2TB Green Stock 3x120mm UQ fans 
OSMonitorKeyboardPower
W7 Pro SP1 x64 LG 21' 1680x1050 Genius  Corsair CX600 
CaseMouseMouse PadAudio
Gigabyte  E-Blue Mazer XFX WarPad On-board 
Audio
Logitech G35 
  hide details  
Reply
post #10 of 27
Thread Starter 
I think i have one somewhere but its rather weak, like 400w or 425w

Adding 2 recent minidumps while trying to overclock, maybe something useful is there.
dumps.zip 59k .zip file
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Crash Analysis and Debugging